The mobo is never modded.
MB: P5WDG2 WS Pro
CPU: E6300 Retail Box
Ram: GSKILL DDR2 800 HZ
Power: Zippy 850W
VGA: Matrox G450 PCI
http://www.iamxtreme.net/andre/WSPRO-473.JPG
Printable View
The mobo is never modded.
MB: P5WDG2 WS Pro
CPU: E6300 Retail Box
Ram: GSKILL DDR2 800 HZ
Power: Zippy 850W
VGA: Matrox G450 PCI
http://www.iamxtreme.net/andre/WSPRO-473.JPG
I can't wait for conroe, I hope more people hit these speeds with the 6300.
http://img.photobucket.com/albums/v6...ut41/31ghz.jpg
http://img.photobucket.com/albums/v6...19secsuper.jpg
These are my results with it ... no where near 32m pi stable but enough to get a decent 1m super pi run out of it. having trouble getting any more than this out of the chip tho.
Running on a 975xbx intel with ballistix ddr2
What cooling are you using to get the 3.3ghz stable? im on a tunic tower 120... think i may benifit from water!
Seems like a really solid board :up:
Quote:
Originally Posted by mupets_revenge
I also use tower 120 and I have no any water cooling.
muppet what RAM timings you got? My 6300 is 100mhz slower then yours and i get 1s faster in SuperPi 1M
Nice result!!!Quote:
Originally Posted by AndreYang
What vmch you used for 473 fsb?
Quote:
Originally Posted by ilgreco1974
Bios max 1.8V
2 Qs andreyang:
1. do u work for Asus, Intel.. ?? :)
2. is this the same one on newegg?
http://www.newegg.com/Product/Produc...82E16813131591
its listed as Core 2 Duo supported board, but .. dont trust the egg ...
No, that is ASUS P5WDG2-WS. You can see there is no heat-pipe on the Neweggs board.Quote:
Originally Posted by theteamaqua
http://www.asus.com/products4.aspx?m...3&l2=82&l3=249
hmmm those times seem a bit impossible...........what tweaks have you used........unless you ran them one at a time but even then the times are prettu fast.......need some answers here plsQuote:
Originally Posted by AndreYang
yup , that dual pi run seems a bit too fast ...
what tweaks you used there andre ?!
Please test max fsb with conroe 6600 or 6700!
Thx
Quote:
Originally Posted by dinos22
Why impossible?
Japanese has some secrets which are running PI quickly.:)
Quote:
Originally Posted by theteamaqua
1. My friend is ASUS Product Manager. So I can get ASUS any product first.
2. It's old WS, not WS Pro.
DS4 is good too!! no mod. either!
http://www.hkepc.com/bbs/attachments...doeMl65XOq.jpg
Quote:
Originally Posted by kenofstephen
Can you Crossfire or use 7950 GX2?:nono:
And gigabyte 965chip super pi is slower than 975x.
Actually they're not much slower but sure there's a difference.
You could probably run SLI with hacked drivers on DQ6?
that pi time is 1 second slower than my E6600 at 3.4ghz.. are ur almost 3.8ghz...
hmm
When will these boards ship in the USA?
Quote:
Originally Posted by xgman
I'm not sure.
Taiwan and Japan are already available in the market.
Whats about memory dividers, is on this better than Asus P5W DH?
Quote:
Originally Posted by OBR
WS Pro and P5W64 already opened memory ""Read Delay"".
If you use Read Delay=7, you will be easy to oc FSB400 DDR2 1000 CL=4.
well it's possible as you've posted it but damn i can't believe it dudeQuote:
Originally Posted by AndreYang
i wanna know what you've done....don't worry about japs :p:
just got a message from
a big german retailer
available mid august (WS Pro ) so I hope next week
thanks andre for your review
dual pi 32M 15m47 sec @3,3 mmmhhh ..unbeaten a.t.m.