Retail (Newegg) 6800 gets SMOKED (good way)

title explained: i named the D-Ice tube
The Camel Pipe
*- Just SMOKE It! -*




Retail 6800 from Newegg:


http://img477.imageshack.us/img477/1...0260hy8.th.jpg




#3 Pi 1M (mbot)



http://img204.imageshack.us/img204/8...3pi4744vo7.jpg







#2 Pi 32M (mbot)




http://img205.imageshack.us/img205/9...1149188im2.jpg



6800EX
ASUS P5W-DH (un modded but improved cooling)
2x gig Corsair XMS 6400 CAS3
Zippy 700w PSU
D-Ice Cooling



http://img53.imageshack.us/img53/5306/pict0263ml3.jpg



i know: it reads low :slapass:

.......



:banana: :banana: :banana:



.

Can you do me a biiiiiig favor?

See how high you can get it using 9x (or if you can estimate that'd work too)? EDIT nevermind found out you were using Dice not Phase...
Well what do you THINK you could go for for 24/7 operation?

I'm just interested because I already have phase, but won't pay more than what an E6600 costs. I know the board's FSB is going to be a rough thing to get over... but a retail E6600 shouldn't WANT to go much higher than 4, 4.2 for 24/7 on phase, right?

http://img64.imageshack.us/img64/899/112pi1maj6.jpg


http://img208.imageshack.us/img208/4725/pict0262wn1.jpg






Chilly1 Single Stage
Evap read -42C in BIOS


down into the 4.3s just to make it through a 3D 05 run
couldn't tell ya where it's "truly" stable ;) ;)


mobo does 440 but NOT much more 8x 9x 10x dont matter the multi
(no mods... yet)

.

Damnnnn

Sweet :toast:

amazing the overlcoking with the retail box

should we take the same batch, hehe

Looking good. Put it under some water and tell us "blue-collars" what we can expect to see out of it ;)

i get the feeling there's more in there...needs a V-Core mod ... but running 1.7v+ through a 65nm Core scares me

:sofa:

Quote:

---

Originally Posted by dr_sharp

Looking good. Put it under some water and tell us "blue-collars" what we can expect to see out of it ;)

---

http://img236.imageshack.us/img236/5...13m8s40zn5.jpg

(this is NOT "Dual Prime 24/7" stable!!!!!!!! its just single 32m stable :stick: )




Storm G5 (silver), Laing D4 pump @ 14V, twin single pass "dual-heater cores" in series, 4x 130CFM fans
CPU cooling the same... Vid card NOT:




http://img142.imageshack.us/img142/7231/pict0259tb8.jpg

Nice cpu there JC:toast:

B2 is a beast with the right cooling and a decent mobo:)

Damn, Joe you are one accessorized guy. :p:

make that #1 32M


http://img462.imageshack.us/img462/5927/ww32muk8.th.jpg



http://img113.imageshack.us/img113/9614/wrpi32qx0.jpg

you need to cool the chipset (put dry ice on it and you'll get almost unlimited fsb) to go for higher fsb that is the big secret of conroe.

Quote:

---

Originally Posted by Mr. Popo

Damn, Joe you are one accessorized guy. :p:

---

im a collector of the exotic cooling equpment... have a G4 Storm from the VERY first batch (unstepped) had 2x.... o its pointless, if its the best , loudest, biggest , ive probably collected it (and payed through the NOSE most times :slapass: )



:toast:

Quote:

---

Originally Posted by metro.cl

you need to cool the chipset (put dry ice on it and you'll get almost unlimited fsb) to go for higher fsb that is the big secret of conroe.

---

it might sound like a stupid idea, but...

what if i put my phase on the P5W CHIPSET, and used high end air for the CPU? do you think itd get the same/better than phase on CPU and stock chipset solution?

Quote:

---

Originally Posted by AndrewZorn

it might sound like a stupid idea, but...

what if i put my phase on the P5W CHIPSET, and used high end air for the CPU? do you think itd get the same/better than phase on CPU and stock chipset solution?

---

not sure, but you could try that if you are fsb limited it could help

heh, well, first time using phase... thats why i want to get a second opinion before i proceed to ruin my board (especially in vain) with improper mounting/insulation

Step 6 :banana:

thats some nasty good stuff
gotta love the unlocked multi

Quote:

---

Originally Posted by Joe Camel

(this is NOT "Dual Prime 24/7" stable!!!!!!!! its just single 32m stable :stick: )

Storm G5 (silver), Laing D4 pump @ 14V, twin single pass "dual-heater cores" in series, 4x 130CFM fans
CPU cooling the same... Vid card NOT:

---

word.
:toast:

Quote:

---

Originally Posted by Joe Camel

make that #1 32M

---

:clap: :banana:

Those 6800's might be useful after all :) I keep thinking "Joe, under there somewhere buried is the actual cpu"

:woot:

Quote:

---

Originally Posted by AndrewZorn

it might sound like a stupid idea, but...

what if i put my phase on the P5W CHIPSET, and used high end air for the CPU? do you think itd get the same/better than phase on CPU and stock chipset solution?

---

I don't think you'd be able to clamp it down well. But I've not even seen the board.

Quote:

---

Originally Posted by AndrewZorn

it might sound like a stupid idea, but...

what if i put my phase on the P5W CHIPSET, and used high end air for the CPU? do you think itd get the same/better than phase on CPU and stock chipset solution?

---

Now that's just stupid, use some quality W/C for chipset and the SS on CPU.
The northbridge can get pretty hot but not like the CPU.

Quote:

---

Originally Posted by Mr. Popo

Now that's just stupid, use some quality W/C for chipset and the SS on CPU.
The northbridge can get pretty hot but not like the CPU.

---

NB can get VERY hot indeed. and water doesn't have any effect on improving yields on NB. Only sub zero does to some extent.

Lookin great there!