Conroe E6400 modPI 1M 14.609s @3482.8MHz by Tarosa

Printable View

05-16-2006, 11:35 AM
fredyama

Conroe E6400 modPI 1M 14.609s @3482.8MHz by Tarosa

By Tarosa

M/B: Intel D975XBXB Rev302
Cooling: LN2
Thanks FCG for the mods:)
http://www.geocities.jp/gbxfs134/Con...0516/14609.JPG
05-16-2006, 11:38 AM
stummerwinter

:slapass:

THAT`S NOT FUNNY, GUYS!

Impressive, what are you doing overthere...:clap:
05-16-2006, 11:39 AM
k0nsl

Is that the true vcore, 1.292V??

-k0nsl
05-16-2006, 11:39 AM
Absolute_0

Very impressive. Is that LN2 and stock volts?
05-16-2006, 11:41 AM
cupra

wow, that is now WR, great one, and he dont have any cold but :toast:

vcore = 1.29v ???

cpu-z show - agp x1 :D
05-16-2006, 11:45 AM
iterations

Not a WR, that would be here (14.031s):

http://coolaler.kj.idv.tw/merom/QLZT/3655.gif

But still very impressive, great work Tarosa!
05-16-2006, 11:54 AM
grimREEFER

nicely done, how was working with that intel board?
05-16-2006, 11:59 AM
thunderstruck!

NICE FSB!:eek: :eek:
05-16-2006, 12:01 PM
eBoy0

I sure hope that's the right voltage :slobber:
05-16-2006, 12:02 PM
Absolute_0

I still think it's stock volts 1.15v and CPUZ is bugged saying 1.292 because that's what it says for Coolaler's tests and he was limited to stock volts...
05-16-2006, 12:05 PM
Vric

Impressive...

Now, more and more people have their Conroe (ok Core 2 duo or whatever)

I want mine now :p

It's quite encouraging to see that. With the current lineup Intel is releasing, I was expecting to get 3Ghz out of the E6600, but look like it will be easier than I thought
05-16-2006, 12:11 PM
Waus-mod

stock voltage but no way ln2 :D rather phasechange or atleast watercooling
05-16-2006, 12:16 PM
Absolute_0

Quote:

Originally Posted by Waus-mod

stock voltage but no way ln2 :D rather phasechange or atleast watercooling

He says it's LN2 so there's no question there. I know LN2 should give it more, but when you're on 1.15v, there's only so far it can go. It'll go further on air with more volts than LN2 with stock volts.

***IF Vcore is limited to 1.15v like i think it is, it is because the motherboard does not have voltage options
05-16-2006, 12:17 PM
Micutzu

Congratulations Team Japan, i wouldn't have expected less from you guys :)
Why is Tarosa running Vcore that low, is the CPU limited by FSB ?
05-16-2006, 12:26 PM
Waus-mod

Quote:

Originally Posted by Absolute_0

He says it's LN2 so there's no question there. I know LN2 should give it more, but when you're on 1.15v, there's only so far it can go. It'll go further on air with more volts than LN2 with stock volts.

***IF Vcore is limited to 1.15v like i think it is, it is because the motherboard does not have voltage options

:slap: my mistake
05-16-2006, 12:56 PM
ORCBEAST

PRTeamJapan

Thx for posting this amazing results..
FSB - 435.4Mhz !
BUS SPEED - 1741.4Mhz !

I do have a question. In the screeny I noticed it says Graphics Interface AGP 1x ? This is the first time i have notice something like this. Could someone explain :)

Also could you confirm the Vcore.

Thx in advance.
05-16-2006, 01:16 PM
thunderstruck!

Quote:

Originally Posted by ORCBEAST

PRTeamJapan

Thx for posting this amazing results..
FSB - 435.4Mhz !
BUS SPEED - 1741.4Mhz !

I do have a question. In the screeny I noticed it says Graphics Interface AGP 1x ? This is the first time i have notice something like this. Could someone explain :)

Also could you confirm the Vcore.

Thx in advance.

It says AGP 1x because Tarosa used a PCI video card.
05-16-2006, 01:16 PM
Extera

awesome!

damn, feeling butterfly's in my stomach like a little child :P
please give us some more details!

is it on stock voltage? and why?
05-16-2006, 01:33 PM
BitpowerPM

Maybe can anybody do CineBench 9,5 on this monster? :slobber:
http://www.cinebench.com/

insane FSB !!

cu, BitpowerPM
05-16-2006, 02:08 PM
vapb400

I thought the max FSB for this board was 30% in either direction of 333.

Making the max 433.33....how did you get around that wall?

LOOKS INCREDIBLE BTW
05-16-2006, 02:39 PM
[XC] hipno650

woe can't wait to see that 435fsb at a 10x muti!!!!!!!!!!!!!!!:D :eek: :banana:
05-16-2006, 03:11 PM
cupholder2.0

Quote:

Originally Posted by vapb400

I thought the max FSB for this board was 30% in either direction of 333.

Making the max 433.33....how did you get around that wall?

LOOKS INCREDIBLE BTW

There is no wall, you can still OC in windows as much as you want.
05-16-2006, 06:04 PM
engenheiro_ce

what mother board you was using??
05-16-2006, 06:59 PM
thunderstruck!

Quote:

Originally Posted by engenheiro_ce

what mother board you was using??

Look at the mainboard tab on cpuz....:rolleyes:

Or maybe this...

Quote:

Originally Posted by PRTeamJapan

M/B: Intel D975XBXB Rev302
05-16-2006, 09:16 PM
VictorWang

awesome FSB @.@
05-16-2006, 10:57 PM
wwwww

Holy bananas! Imagine when we got more vcore to play with...
05-16-2006, 11:50 PM
BitpowerPM

Imagine when we got a Conroe XE 3,33 GHz + more voltage to play with... :D :slap:
05-17-2006, 08:19 AM
fredyama

Got more inf from Tarosa.
No Vmod yet still analyzing so he believes Vcore was as close to what cpu-z indicated.

(Set up @May 16)
For modPI 1M 14.609s @3482.8MHz

M/B: Intel D975XBX Rev.303　
CPU: Conroe E6400 ES
Memory: Crucial PC2-8000 Ballistix　512MBx2
HDD: HITACHI HDT722516DLAT80 164GB
VGA: Matrox Millennium G450 PCI
PSU: Zippy-600W the Gaming Edition 3.3V Rail mod →3.65V
OS: Windows Server 2003
http://www.geocities.jp/gbxfs134/D97...are/H14609.JPG

(Set up @May 17)
For modPI 1M 14.468s @3472.1MHz

Cooling: LN2
M/B: Intel D975XBX Rev.303　
CPU: Conroe E6400 ES
Memory: Crucial PC2-8000 Ballistix　512MBx2
HDD: Seagate ST318453LW 18GB ULTRA320/Adaptec 39320D 32Bit PCI
VGA: KUROUTO SHIKOU　FX5200 PCI 128MB
PSU: Zippy-600W the Gaming Edition 3.3V Rail mod →3.65V
OS: Windows Server 2003
http://www.geocities.jp/gbxfs134/D97...are/S14468.JPG

http://www.geocities.jp/gbxfs134/Conroe/060517/468.JPG

Comments: I can hardly sleep tonight till find out the way to Vmod:D
05-17-2006, 08:42 AM
Hystrix^

nice :banana:
05-17-2006, 09:36 AM
Supertim0r

why is your 3.3v @ 3.65 ?
05-17-2006, 10:49 AM
althes

truly amamzing
05-17-2006, 10:57 AM
Extera

SCSI made a difference.....
amazing results man

keep on going :toast:
05-17-2006, 11:46 AM
ar7786

Where to find that PLL control program, clockgen 1.0.4.4?
05-19-2006, 06:26 AM
fredyama

UPDATE By Tarosa

Except 1M, think others are new WRs-- hard to keep tracking the records recently:D

(Set up @May 18)
Cooling: LN2
M/B: Intel D975XBX Rev.303　Vcore1.6V(BIOS)
CPU: Conroe E6400 ES
Memory: Crucial PC2-8000 Ballistix　512MBx2
HDD: Seagate ST318453LW 18GB ULTRA320/Adaptec 39320D 32Bit PCI
VGA: KUROUTO SHIKOU　FX5200 PCI 128MB
PSU: Zippy-600W the Gaming Edition 3.3V Rail mod →3.65V
OS: Windows Server 2003

modPI 1M 13.672s @FSB 460.1MHz
http://www.geocities.jp/gbxfs134/Con...0518/13672.JPG

modPI 2M 32.860s @FSB 460.1MHz
http://www.geocities.jp/gbxfs134/Con...0518/32860.JPG

modPI 4M 1m15.969s @FSB 460.1MHz
http://www.geocities.jp/gbxfs134/Con...518/115969.JPG

modPI 8M　2m50.859s @FSB 458.2MHz
http://www.geocities.jp/gbxfs134/Con...518/250859.JPG

modPI 16M 6m24.266s @FSB 454.4MHz
http://www.geocities.jp/gbxfs134/Con...518/624266.JPG

modPI 32M　13m53.422s @FSB 450.6MHz
http://www.geocities.jp/gbxfs134/Con...18/1353422.JPG
05-19-2006, 06:29 AM
NiCKE^

Is it yours Fredyama?
05-19-2006, 06:34 AM
fredyama

Quote:

Originally Posted by NiCKE^

Is it yours Fredyama?

Sorry for the confusion they are all done by Tarosa as in the title:D
05-19-2006, 06:35 AM
NiCKE^

Ah thanks, congrats him from me. He got WR in everything except 1M! Really amazing hehe. Want to see what he can do with a "real" motherboard like Asus, MSI or DFI ;)
05-19-2006, 06:36 AM
freecableguy

Looks like that OCZ is really allowing that Conroe to move. I wish I had a pair of that mem! 2.2v VDIMM there? or have you modded for more?
05-19-2006, 06:39 AM
NiCKE^

Quote:

Originally Posted by freecableguy

Looks like that OCZ is really allowing that Conroe to move. I wish I had a pair of that mem! 2.2v VDIMM there? or have you modded for more?

OCZ?
05-19-2006, 06:47 AM
Iconyu

Quote:

Originally Posted by freecableguy

Looks like that OCZ is really allowing that Conroe to move. I wish I had a pair of that mem! 2.2v VDIMM there? or have you modded for more?

Says he's using Crucial 8000 on his set up lists old boy.
05-19-2006, 11:15 AM
fredyama

Quote:

Originally Posted by freecableguy

Looks like that OCZ is really allowing that Conroe to move. I wish I had a pair of that mem! 2.2v VDIMM there? or have you modded for more?

AFAIK, Vdimm was still 2.2V.
05-19-2006, 12:33 PM
d@rkn1ko

the northbridge is on air or watercooled? :toast:
05-19-2006, 09:37 PM
fredyama

Quote:

Originally Posted by freecableguy

2.2v VDIMM there? or have you modded for more?

FYI, TAM has just figured out Vdimm mod:
@SC2612E(U6H1): 20--100KOhm VR at #1pin to GD
He added 220Ohm fixed resistor to prevent a short circuit.
Around 2.8Vdimm at about 1.1KOhm as shown below.

http://u-san.net/c-board/file/975XBX_VddrMod.jpg

Quote:

Originally Posted by ar7786

Where to find that PLL control program, clockgen 1.0.4.4?

Searched but could not find its URL:(
You can get 1.0.4.4a at kyosen

Quote:

Originally Posted by d@rkn1ko

the northbridge is on air or watercooled? :toast:

On air;)
05-19-2006, 09:49 PM
Charles Wirth

Sweet thanks, this will open a whole new level for me.

my current best @ 3.9Ghz

http://fugger.netfirms.com/39pi.jpg
05-19-2006, 09:59 PM
s7e9h3n

Quote:

Originally Posted by freecableguy

Looks like that OCZ is really allowing that Conroe to move. I wish I had a pair of that mem! 2.2v VDIMM there? or have you modded for more?

:confused:
05-19-2006, 10:01 PM
fredyama

Quote:

Originally Posted by FUGGER

Sweet thanks, this will open a whole new level for me.

my current best @ 3.9Ghz

http://fugger.netfirms.com/39pi.jpg

You are quite welcome:)
TAM & other members said thank you FCG for his mods and wish you all the best.

All times are GMT -8. The time now is 02:32 AM.

XtremeSystems