room temp 15C
cooler: Tower 120
http://iamxtreme.com/cpu/t2600/aopen_yonah_019.JPG
possible break 15min at 3.4G???!!!
Printable View
room temp 15C
cooler: Tower 120
http://iamxtreme.com/cpu/t2600/aopen_yonah_019.JPG
possible break 15min at 3.4G???!!!
OMG that thing flies must get one,must see one on phase
i am going to try later!Quote:
Originally Posted by Sub zero
my mobo only vcore and vdimm... i wonder i can break 14m XD
Which FSB with 32M can you reach @ 1,5 V?
My T2600 does 240 MHZ, I´m just thinking, if it make sence to mod the board...;)
250 1M passed 1.5v it is just SO SO oneQuote:
Originally Posted by stummerwinter
i heard some one has T2600 255 32M 1.5v.....
With Intel chips does the board or CPU limit the FSB? Just curious
Either way, that's incredible
1M I can do with 246 MHz and a Zalman 7000B AlCu...;)
So maybe it make sence to mod and put DICE on the CPU...:D
AFAIK its the board
i think is cpu... heheh
now running DI -55C 3.511 32M
No one really knows, take a look at the intel section, people are very frustrated with the inconsistency of Yonah. They are all FSB limited somehow. The only way to find out is to try a new board, but there aren't any to choose from.Quote:
Originally Posted by Repoman
finish 3511 with 15'41.0x.... lol
later i tried to increase FSB but fail XD
no pic yet! i will post it maybe tomorrow... haha
looks like your moving in on the wr there, that was a yonah @ 3.56 i believe. Very nice times your pulling there on air though.
Woah you're really cranking it up Denny! Can't wait to see the dice times :)
i wonder i should use win 2003 for next run hehe
gimmeeeeeeeeeeeeeeee :slobber: :slobber: :slobber: :slobber: :slobber:Quote:
Originally Posted by guess2098
whaz the 1m time of this beast???
I want to see LN2.:D
HiPro did amazing things.. i'm sure looking at his example might point out some improvements that could be done.Quote:
Originally Posted by thunderstruck!
@guess: which mods have you done on your mobo?
I think, my limit ist atm the CPU/Vcore. The CPU scales with more Vcore...;)
WOW on air, its impressive to say the least..
Great work im sure you can push her a bit further yet:stick:
15m 4xs 32M = wow :toast:
Apparently someone knows how to tweak & setup for PI here ;)
What in specific are you thinking of?Quote:
Originally Posted by STEvil
Afaik Hipro lost his Yonah-board to a faulty vmod suggested by hicookie?
nice result...is your mobo v-modded??
wow...guess you gotta get some pics up
If conroe is similarly fsb limited (if it is indeed due to the cpu and not the mobo), then I guess that would make a good case for intel to persuade the high end overclockers into getting the extreme edition rather than just clocking the hell out of the 300$ chip.. unlocked multi might be the only way to really get the insane overclocks on exotic cooling. (I realized I kind of ignored this thread, this is not to say that the overclock here isnt nuts, as it is, but i'm just saying that there seems to be somewhat of a limit right now and it just got me thinking.)
FSB cap on Conroe would be a DISASTER. Thats just coldbug rewritten...Quote:
Originally Posted by madgamer
Conroe is NOT fsb limited.
333+ FSB is normal on Conroe
It`s all about SPi :D
Maybe some 3D benches with that thing :rolleyes:
the new pi @ -59.1C base
3549
about 15' 26s
i will post the pic later! time to go to frys and get some cans to clean the dust!
bte i think my yonah is max at 275 cuz 273 32m pass, 274 32m passed, but 275 32m can't even passed initial look and freeze
QKHK?Quote:
Originally Posted by guess2098
Wasn't referring to that, but his work with dothan chips which had the same issues.Quote:
Originally Posted by jrw
Woah...CPUZ is totally borked at this speed :p:Quote:
Originally Posted by guess2098
:)Quote:
Originally Posted by s7e9h3n
hahahaa
it is QKHK
and new aopen bios can not disable the step xxxxxxxx sth like that!
so lower the mp as cpu idle
Ahhhh...thx...no wonder...I was wondering what the hell was happening to my cpu speed after I installed the bios :p:Quote:
Originally Posted by guess2098
Are you tlking about the 1.03beta? I switched bank from this to 1.03 for that reason...;)
Or did you get any addtional performance from the beta?
...still waiting for the 1m BOOOOOOOOOOOM ;)
I like the pi times and all that, but why is amd still top in 3d?
it seems these things rip pi, but amd is still the choice for gamers?
1.03b doesn't gine any performance i believeQuote:
Originally Posted by stummerwinter
why~~~~why~~ why 1M lolQuote:
Originally Posted by SoF
next time XD
because 975 chipset CF = no good.... RD580 is super good lolQuote:
I like the pi times and all that, but why is amd still top in 3d?
it seems these things rip pi, but amd is still the choice for gamers?
You don't need a reason! *snaps whip* :DQuote:
Originally Posted by guess2098
Great stuff, Conroe is kicking some serious ass.
conroe.... goodQuote:
Originally Posted by Deathspawner
but still waiting for good mobo...
i hated to use intel their mobo heheh
This is awesome result, Denny! :slobber: I've never thought we would see that kind of air-cooled performance :up:
I'm sure people said that back in the Wilamette days as well :p:Quote:
Originally Posted by bachus_anonym
But seriously...that is mad. That beats the crap out of ANY phase changed athlon, any phase changed P4, and it's a bloody laptop chip, on air. Well done, keep up the great stuff.
Without doubt the new chips are fast in super Pi.
Still,
3D is what I use the machine for, do I get new frames with the new Cpu and if so how much?
Does it add smootness and speed to compensate for new mobo etc..?
At current status, no game is stopped by cpu or gpu power.
Looking forward more extreme testing and 24/7 use.
Always fun with new stuff...
nice~ o/c:toast: