Strong DDR2 1GBX2 , DDR2 1000 4-4-3-4 Super PI 32M Done

Printable View

03-20-2006, 06:40 PM
AndreYang

Strong DDR2 1GBX2 , DDR2 1000 4-4-3-4 Super PI 32M Done

MB: P5WDG2-WS
Ram: Super Talent DDR2 800 1GBX2 D9 chip
CPU: P4 661

http://andre.kj.idv.tw/STT-DDR2 1000.JPG
03-20-2006, 09:18 PM
jpharg

Thats some sweet ram. Thats some low vcore for those clocks on your 661, nice. Why does your motherboard say it is AGP 2.0?
03-20-2006, 09:28 PM
AndreYang

Quote:

Originally Posted by jpharg

Thats some sweet ram. Thats some low vcore for those clocks on your 661, nice. Why does your motherboard say it is AGP 2.0?

Because I use PCI Matrox G450.
03-20-2006, 09:39 PM
boostedevo

What is the voltage on the memory at this speed/timings? I need 2GB, but don't really want to give up my Mushkins...this stuff looks decent for 2GB though.
03-20-2006, 09:45 PM
AndreYang

Quote:

Originally Posted by boostedevo

What is the voltage on the memory at this speed/timings? I need 2GB, but don't really want to give up my Mushkins...this stuff looks decent for 2GB though.

http://www.supertalent.com/SuperTale...?PN=T800UB1GC4

But I don't know voltage.
03-20-2006, 09:50 PM
boostedevo

I meant what do you have it set for in BIOS? 2.30V? No voltage mods on the mobo for the mem then I assume? Definitely a strong 2GB kit!
03-21-2006, 02:27 AM
kakaroto

Nice Supertalents, soon I will test some D9 based DDRII too. :)

How much volts?
03-21-2006, 03:07 AM
hicookie

Quote:

Originally Posted by kakaroto

Nice Supertalents, soon I will test some D9 based DDRII too. :)

How much volts?

i think full power 2.4V:D
03-21-2006, 03:17 AM
boostedevo

I keep waiting to see if these sticks will run CAS3 at all with more volts and if so, how high. My Mushkins are D9s, but only 1GB and will run DDR1033ish with 2.45V and 4-2-3-4. If these SuperTalents are anywhere in the ballpark of that with a 2GB kit (and it looks like they could be), I am going to be hard-pressed not to pick up a set before they are gone. I am still waiting to see the new stuff Mushkin is coming out with, but these are making it difficult to wait :)
03-21-2006, 03:24 AM
gundamit

Thanks for the testing. Is this the same memory in this Driver Heaven review?

Ewiz has it for $340USD Hopefully prices will come down a bit before AMD move to DDR2. If not, I may have to wait for Conroe from Intel.
03-21-2006, 04:18 AM
AndreYang

Quote:

Originally Posted by gundamit

Thanks for the testing. Is this the same memory in this Driver Heaven review?

Ewiz has it for $340USD Hopefully prices will come down a bit before AMD move to DDR2. If not, I may have to wait for Conroe from Intel.

Yes, the same memory. I bought from ewiz.
03-21-2006, 04:25 AM
gundamit

Quote:

Originally Posted by AndreYang

Yes, the same memory. I bought from ewiz.

Whoops. I just read Fuggers thread on these sticks after I posted on yours. Nice sticks ... they seem a little faster than Fuggers. Maybe your mojo is stronger?
03-21-2006, 04:49 AM
CapFTP

nice...tuned to look some good DDR2
03-21-2006, 08:17 AM
WoD

Where can I buy this RAM in Europe (Germany)?
03-21-2006, 08:33 AM
Charles Wirth

Very nice memory, lots of potential.

I am at 394FSB + ratio

Andre is at 300FSB + ratio

My top speed ratio'd to 1100Mhz, just for screen shot but I am sure I could have benched at that.
03-21-2006, 08:52 AM
bachus_anonym

Very nice clocks there, Andre :up:

I think FUGGER (in his original ST thread) and Andre (here) just showed us some awesome DDR2 to go after. I need to get a DDR2 testing paltform as well. Seems like fun :)
03-21-2006, 09:34 AM
AndreYang

Quote:

Originally Posted by gundamit

Whoops. I just read Fuggers thread on these sticks after I posted on yours. Nice sticks ... they seem a little faster than Fuggers. Maybe your mojo is stronger?

Maybe P5WD2-E is more overclocked than WS. WS limit FSB is about 320~345. But P5WD2-E can run FSB 350+.

So I don't think WS is stronger.
03-21-2006, 09:44 AM
Charles Wirth

Good info on the WS, I am yet to run the WS board but it should be good for the 955XE processor under cascade or LN2 with the high multis.
04-12-2006, 04:07 PM
hot_fifty

how much voltage on ddr2´s super talent... 2,3? to get that assume oc
04-12-2006, 04:10 PM
Charles Wirth

Depends on the mobo, P5WD2 goes up to 2.5v
04-12-2006, 04:33 PM
vanovich

Quote:

Originally Posted by FUGGER

Depends on the mobo, P5WD2 goes up to 2.5v

that must be the e verstion ,right? couse a normal p5wd2-p only goes to 2,3 std without mods . hope my incomming talent do as good .
04-12-2006, 07:05 PM
Deathspawner

I just duplicated the same clocks and timings on these modules, thanks for the post or else I wouldn't have tried it. Mine were perfectly stable at 2.4v.

FTR, the stock voltage on those modules are 1.8v for 4-4-3 timings. They claim they are 4-3-4 modules, but it's really 4-4-3.
04-14-2006, 03:36 PM
hot_fifty

yah but how much voltage for 500mhz 4-4-3-4? AndreYang
04-14-2006, 03:39 PM
M.Beier

Wow, AndreYang!!!
Dude, you gotta put THOSE mem on your 2.4ghz Conroe :D
04-14-2006, 04:50 PM
Deathspawner

Not trying to hijack the thread or anything, but I've been stressing these modules for the past few days also.

I managed 400MHz at 3-3-3 which was pretty nice:

http://techgage.com/etcetera/picture..._333_thumb.jpg

Andre, did you crack open the modules to see that they are D9's? I was told by Super Talent that they were Rev. F's, so I am just wondering if they mislead me, unless there is a Rev F D9, lol.
04-14-2006, 05:24 PM
vanovich

#25 what do you use to stress them .win memtest or? im getting a set ,should be here soon. exactly how did you stress them.
04-14-2006, 05:29 PM
Deathspawner

Quote:

Originally Posted by vanovich

#25 what do you use to stress them .win memtest or? im getting a set ,should be here soon. exactly how did you stress them.

#26,

I used the MemTest from this site: http://hcidesign.com/memtest/

I usually go to around 400%, but I get bored early.

Here's another: 3-3-3 @ DDR2-834
04-15-2006, 02:44 AM
hot_fifty

And how much voltages m8, getting a set as well
04-15-2006, 02:46 AM
hot_fifty

use memtest x86 or some superpi 32m. that win memtest is not good
04-15-2006, 04:51 AM
Deathspawner

Quote:

Originally Posted by hot_fifty

And how much voltages m8, getting a set as well

2.4v all around for 3-3-3 timings. 2.3v if you use CAS 4.

Quote:

Originally Posted by hot_fifty

use memtest x86 or some superpi 32m. that win memtest is not good

Huh? That Win MemTest is excellent.. it picks up errors that MemTest 1.65+ won't pick up. For instance, I ran a loop of 1.65+ yesterday for an hour and had no errors picked up, and then used the Win MemTest and had errors in under a minute.
04-15-2006, 09:05 AM
hot_fifty

okay wired cause I usally use memtest x86 and find it very, better than the 1 i win, but I will try
04-15-2006, 09:41 AM
Deathspawner

Quote:

Originally Posted by hot_fifty

okay wired cause I usally use memtest x86 and find it very, better than the 1 i win, but I will try

Well, I ran a loop of MemTest 1.65+ using 400MHz 3-3-3-8. Four complete passes and no errors, so all is good. At DDR2-834 there *are* errors, but I fully believe if you can get 2.5vdimm then that could also prove error free. These modules seem to *love* voltage.
04-15-2006, 10:45 AM
hot_fifty

is the vdimm mod easy to do on p5wd2-p, and BTW to check how much voltage is giving

All times are GMT -8. The time now is 12:03 AM.

XtremeSystems