Freeze Pack Production Line (56k warning)

Printable View

03-19-2006, 04:08 AM
Unseen

Freeze Pack Production Line (56k warning)

In this thread i will show you the systems i am making for friends.

Well enjoy the first pics:
http://img20.imageshack.us/img20/4166/hpim21941bq.jpg
http://img48.imageshack.us/img48/3158/hpim21952gh.jpg
http://img115.imageshack.us/img115/1818/hpim21963rz.jpg

I have already finished one single stage. Now i am finishing the dual head and starting another one ss.

This is for user "lordesar" from pctechnology.gr
http://img161.imageshack.us/img161/4453/hpim22035ia.jpg
http://img220.imageshack.us/img220/1510/hpim22042wd.jpg
Suction line temp
http://img119.imageshack.us/img119/2919/hpim22007vl.jpg
finished
http://img46.imageshack.us/img46/6296/hpim22051mq.jpg
http://img115.imageshack.us/img115/9076/hpim22068au.jpg
http://img131.imageshack.us/img131/6884/hpim22077om.jpg

And this one is for user "TheoV" from thelab.gr
http://img231.imageshack.us/img231/7118/hpim22084vq.jpg
http://img236.imageshack.us/img236/3693/hpim22090zs.jpg

Thats for now..

I will updating often.
03-19-2006, 04:16 AM
Alex08

great job unseen!

i was wondering if you could post pics of the dual headed monster you have being built.

i would also love to get a hold of one of those cases, but i assume shipping one to the US would be really hard.
03-19-2006, 04:29 AM
Twisted-net

Verry nice machines, really you make exelent units :D
I like the case and the overall looks of a unit.

When the time is there ill get one to ;)

btw: what compressor is thats ?
03-19-2006, 04:37 AM
Unseen

Thanks guys

@alex I will show pics from dual head when it is finished :) It has 9000btu rotary compressor! Shipping a case to us will be a little expensive. Better buy one from chilly1 or make one.

@twisted
I am using NEK2134GK or NEK2150GK model from Aspera. It is powerfull and silent. 220v by the way
03-19-2006, 05:02 AM
placebo

Good Job!
Maybe Andy meant you, not me.... hehehehehe ;):D
03-19-2006, 05:03 AM
Gray Mole

Awesome work Unseen!

Looks like it's keeping you busy, and your usual top quality work :D

Cheers

Gray
03-19-2006, 07:54 AM
esdee

nice production line my friend, we should be living in ilioupoli too ...
03-19-2006, 08:49 AM
n00b 0f l337

Wow, those look even better than chilly1s!
I like the high pressure gauge on the front along with the entire metal look.
03-19-2006, 08:51 AM
\Karting_freak

what is that big case for? dual comp - evap ss or smth else?
03-19-2006, 08:58 AM
n00b 0f l337

Dual evap with a single rotary I'm geussing.
03-19-2006, 11:12 AM
runmc

Very nice work Unseen - you are very talented indeed.:D
03-19-2006, 12:05 PM
SlackeR

Beautiful machines :)
03-19-2006, 12:31 PM
Eleven

Since this is my first post at this forum (although watching it for a long time) hello to everyone :)

@ Unseen
Excellent job man .Keep on
I had the opportunity to have a close look at them at Unseen's house and I must say that I was impressed by their quality and preformance
Imrpesive corse during this 2 last years
03-19-2006, 03:03 PM
Jort

ah eleven the evap, waterblock builder;)

enjoy your stay here at XS and good luck with the production unseen;)
03-19-2006, 11:52 PM
Unseen

@Eleven Finally u registered here!Thanks a lot.

Guys he is the one who makes for me those beautiful evaporators! Plus excellent cpu-vga waterblock! For example take a look at his avatar :)
03-20-2006, 12:51 AM
LittleDevil

Nice job...

Do you have any closer pictures of evap?

tnx
03-20-2006, 01:06 AM
Waus-mod

Great work bro.... as i allready told you :D youre units look damn good !!!!
03-20-2006, 02:56 AM
Unseen

@little
Is this pic ok for u?
http://img164.imageshack.us/img164/1490/16zs.jpg

Check here for the enclosure too..

http://img417.imageshack.us/img417/2...17363xg.th.jpg

http://img417.imageshack.us/img417/3...17375wv.th.jpg

http://img418.imageshack.us/img418/6...17386pa.th.jpg

http://img426.imageshack.us/img426/6...17393nu.th.jpg

It is not showed the whole enclosure in the last pics but u get an idea. I will upload some more when i get back home.
03-20-2006, 02:57 AM
Fhqwhgads6680

eleven welcome! great to have ya onboard! as unseen said your work is beautiful...

Unseen, so is yours....the cleanliness and thought put in to planning you systems out is unparlleled! I tend to plan as I go and I've leaned thats not the best way to go about things eh..

Keep it up man, I always love seeing your work!

brandon J
03-20-2006, 03:02 AM
LittleDevil

Unseen nice tnx for pic...

What about mounting do you have closer pic...?

tnx
03-20-2006, 03:03 AM
runmc

Quote:

Originally Posted by Eleven

Since this is my first post at this forum (although watching it for a long time) hello to everyone

:)

Welcome to you Eleven :welcome:
We have been enjoying your work for some time now.
03-20-2006, 04:09 AM
Athens[2004]

I can see a Factory in this thread :hehe: Nice work Unseen , and 4 11's blocks&evaps pics speaks
03-20-2006, 04:01 PM
Ssilencer

Really nice evap, I really like the size. I hope people stop doing big evaps, they are not needed at all.
03-21-2006, 01:44 AM
Unseen

@Ssilencer I agree with that. 4cm diameter is the ideal i think.
03-21-2006, 03:29 AM
Jack

unseen did you recieve my PM?
03-21-2006, 04:30 AM
Unseen

no...send it again or msn->unseen@in.gr
03-21-2006, 04:45 AM
kayl

UNseen your are a machine:toast:
hope the production line goes well;)
03-22-2006, 07:48 AM
FrOsT_frt

Great Job m8.
I hope, I will be able to bring my unit for a "facelift" soon :p:
03-22-2006, 08:12 AM
Codeman05

wow, those look great
03-23-2006, 12:10 AM
Unseen

i have almost finished the other unit... only the switches have left...
http://img239.imageshack.us/img239/7565/27xf.jpg

http://img239.imageshack.us/img239/6806/30zu.jpg

...
03-23-2006, 02:28 AM
MeltedDuron

That's some great work there as usual my friend. Love elevens evap too :)
03-23-2006, 03:37 AM
neoman

Unseen : Is it possible to order one of those things ? And if yes how much will it cost in Euros . Thx
03-23-2006, 03:46 AM
Unseen

pm plz or msn.
03-23-2006, 07:48 AM
Stelios

Unseen , the fan can be mounted on the condenser only for pull , or there is a way to push air ???
03-23-2006, 07:57 AM
Unseen

I prefer to pulling air but if u want u can turn the fan and mount it in the other way.
03-23-2006, 09:05 AM
Nosfer@tu

This is giving me a BONER :D
03-23-2006, 11:55 AM
Twisted-net

Quote:

Originally Posted by Nosfer@tu

This is giving me a BONER :D

LOL if that gives you a "BONER" you got to get out more. ;)

Really nice work unseen the second unit looks very nice to :clap:
Keep up the good work !
03-23-2006, 01:39 PM
Brettbeck

Very nice work both Unseen & Eleven!
03-24-2006, 12:16 PM
Nosfer@tu

Quote:

Originally Posted by Twisted-net

LOL if that gives you a "BONER" you got to get out more. ;)

Really nice work unseen the second unit looks very nice to :clap:
Keep up the good work !

Engaged and it STILL gives me a boner :D

now I just want to se some cascade with BD35F compressors or somthing just as quiet :D
03-24-2006, 01:18 PM
RaVeN155

bd35f compressors are not that quiet imo, sth similar to that asperas i think.
03-24-2006, 04:53 PM
Stelios

Quote:

Originally Posted by RaVeN155

bd35f compressors are not that quiet imo, sth similar to that asperas i think.

Now that you have heard the NEK series from Aspera , how do you rate em in terms of noise ? Mostly interested comparing Aspera vs NL11F .
03-24-2006, 05:01 PM
GoriLLakoS

Nice production line unseen...:toast:

Welcome 11..it was about time...:D

Nice and cleany work as always too....:toast:
03-24-2006, 06:39 PM
mesyn191

That some beautiful work there Unseen, if it wasn't for the fact that you're all the way across the world (shipping!!!) and that I've already ordered a custom unit from Chilly1 I'd order one from you.
03-25-2006, 12:05 PM
Brettbeck

Whats that stuff you guys put round the insulation before the evaporator. It looks like Vantec cable sleeving?
Also, does the capillary tube run through the suction tube? Thanks:).
03-25-2006, 12:15 PM
RaVeN155

Stelios i havent heard NEK series, we have only NE here and Unseen told me that nek is a lot quieter than ne. So if ne is similar to nl11f maybe a little bit louder than nek may be even quieter than nl11.

maybe unseen know sth about it?
03-25-2006, 01:05 PM
afireinside

Those are beautiful Unseen, some of the best I've ever seen. A factory job. :)

Load temps?
03-27-2006, 04:59 PM
Stelios

Ooops ! Sorry RaVeN155 ... I thought that you have also used a NEK one.
03-27-2006, 05:18 PM
Weee

I've always liked the look of your work, good job!
03-28-2006, 11:33 PM
Unseen

Hi guys :) I am back. 4 days holidays for me ;)

Well the NEK compressors are a lot better than NE. They are a lot quiter and they perform better.

In the last single i used NEK2150GK and the guy who took it told me that at his 4400x2 @ 3100@1,61vcore he has -30 idle and -15 full load (4 superpi,2 on each core). I think it worked very nice.
04-05-2006, 01:07 PM
Unseen

I have just finished the dual head :)

Rotary Samsung Compressor 1hp
r507+r410
Eleven's evap cpu+gpu

http://img407.imageshack.us/img407/1130/dark19ki.jpg
http://img98.imageshack.us/img98/7717/dark25dv.jpg
http://img119.imageshack.us/img119/8427/dark46hi.jpg
http://img355.imageshack.us/img355/3...losures9so.jpg
http://img77.imageshack.us/img77/1586/k37ev.jpg
http://img471.imageshack.us/img471/7492/k42fr.jpg
http://img297.imageshack.us/img297/7302/k10rc.jpg
http://img304.imageshack.us/img304/5449/k22sd.jpg

~-43 both evaps at idle and ~-30 on load. Looks good to me.

I have to finish two ss now...
Bye...
04-06-2006, 01:43 AM
Twisted-net

OMG :slobber:

Verry nice, you just keep comming up with these great units.
Keep up the excelent work :D
04-06-2006, 12:29 PM
Eleven

1 Attachment(s)

Sorry for the late reply
Thanks for the welcoming........:) hope to post more often

Unseen , maybe those will be useful for the production line
04-06-2006, 03:41 PM
GoriLLakoS

Heeey.....two of them are mine...:D
04-06-2006, 09:50 PM
the_new_guy

nice evap!
04-08-2006, 08:15 AM
Unseen

just got them :)
http://img318.imageshack.us/img318/2628/hpim22677lk.jpg
http://img317.imageshack.us/img317/5347/hpim22686kj.jpg
I have almost finished another unit for user "pieros"
http://img436.imageshack.us/img436/7907/hpim22708ws.jpg
http://img391.imageshack.us/img391/3908/hpim22710qn.jpg
and new condeser ;) I am testing it right now...
http://img470.imageshack.us/img470/2779/hpim22723xo.jpg

bye
04-08-2006, 08:25 AM
\Karting_freak

will my condensers be new rev?
04-08-2006, 09:12 AM
Jack

is that pile of condensors mine? :)
04-08-2006, 11:20 AM
Unseen

@jack yeah ;)

@karting whatever u want.
04-09-2006, 04:40 AM
\Karting_freak

@Christos
whichever is better in performance ))
04-09-2006, 10:39 AM
Unseen

@karting Ok no problem :)

Well today i made sth little different thanks to raven :)

I will show more the next days
http://img440.imageshack.us/img440/6523/f7bt.jpg
04-09-2006, 11:31 AM
piotres

Quote:

Originally Posted by Unseen

@karting Ok no problem :)

Well today i made sth little different thanks to raven :)

I will show more the next days
http://img440.imageshack.us/img440/6523/f7bt.jpg

What a nice small thing :D
04-11-2006, 05:53 AM
Stelios

Unseen , can you show us the other side of the double row condensers ? I want to check the inlet and outlet .
04-15-2006, 01:02 AM
Unseen

finished

http://img134.imageshack.us/img134/3...sfinish3pc.jpg
http://img135.imageshack.us/img135/3...finish12fr.jpg

It can hold my 631@5700 for 24/7
04-15-2006, 09:13 AM
Stelios

Very nice !!! :clap:
04-15-2006, 11:10 AM
Pieros

:toast:

I am waiting . . . :banana3: :hump:
04-15-2006, 03:57 PM
proth

I wonder how economical it is to ship these units to the USA, and if they can withstand the shipment.?
04-16-2006, 10:50 AM
Unseen

I still cant find a cheap way to ship my units overseas..Besides that there is another problem. Here we using 220volts
05-12-2006, 09:13 AM
Unseen

I havent update my thread cause the units i have send didnt have any differences...
Here it is another ss.
I gave it yesterday to his owner.
http://img391.imageshack.us/img391/8999/hpim23625qa.jpg

He it is another single with slhx+cpev that i finished some days ago .
http://img147.imageshack.us/img147/875/g18dk.jpg
05-12-2006, 09:23 AM
bigboi86

Very nice work.

Would you be able to build a 110vac unit?
05-12-2006, 09:28 AM
Unseen

maybe but i think that it doesnt worth due to shipping costs :(
05-12-2006, 09:37 AM
bigboi86

Quote:

Originally Posted by Unseen

maybe but i think that it doesnt worth due to shipping costs :(

That depends on how much it costs ;)
05-12-2006, 10:48 AM
Revv23

i love those cases, you design them yourself?
05-12-2006, 11:44 AM
Unseen

We designed them with eleven :)
07-18-2006, 10:11 AM
Unseen

Hi again guys.

The last freeze pack. I will stop making units for some time cause i have to study. I can only supply parts if anyone wants. Thank you all for the support.

http://img261.imageshack.us/img261/6893/phase1lq7.jpg

http://img286.imageshack.us/img286/3057/phase2sa6.jpg

i'll be back soon...
http://img408.imageshack.us/img408/2043/unseen1xf9.jpg
07-18-2006, 10:29 AM
Jort

good luck with your study ;)

i am going to stop making and modding phase for an unknown period too :)
10-10-2006, 01:20 AM
[cTx]Philosophy

Verry nice work fellas, sweet looking units for sure..
Sad US cant get in on some of these sweet lookin rigs, whats max load temps on one of these?
Say on a A64 dual core @ 1.6+ volts..
10-10-2006, 02:07 AM
Unseen

Thanks philosofy :)

I can give you an example. Amd x2 3800+ @ 3Ghz @1,64vcore @ snm full load(both cores) the dfi guard shows -8.

Ps.Still my thread visiting? wow.. :D
10-10-2006, 04:19 AM
runmc

Very nice Christo - Good luck with your studies - school is cool :cool:
10-10-2006, 09:49 AM
Unseen

Thanks ron but i gave up... School is cool but i didnt have 4k euros to pay someone to prepare me for the exams in june. I will try again the next year.
05-05-2007, 06:42 AM
Nosfer@tu

How is phase change building progressing for you Unseen :)
05-05-2007, 07:46 AM
sacha35

Quote:

Originally Posted by Unseen

Hi again guys.

The last freeze pack. I will stop making units for some time cause i have to study. I can only supply parts if anyone wants. Thank you all for the support.

http://img261.imageshack.us/img261/6893/phase1lq7.jpg

http://img286.imageshack.us/img286/3057/phase2sa6.jpg

i'll be back soon...
http://img408.imageshack.us/img408/2043/unseen1xf9.jpg

Thats has got to be the best case i have seen, good job mate and well done on a great product.
05-07-2007, 01:41 PM
V2-V3

you have a talent man, I wish you the best of luck w/ you studies.
05-07-2007, 05:09 PM
teyber

literally the best case i have ever seen for a case... its almost, Unseen!
05-11-2007, 10:33 AM
Unseen

Hehe my thread still have hits? I am ok guys, i am still building phase stage systems but not so many like before. 2-3 per month. The truth is that i got tired so now i built only for friends. I will upload some pics when i download them from my camera.

thanks a lot for the comments.
05-11-2007, 01:10 PM
Nosfer@tu

well that is why you put them into production and dont make eveyrthing your self :D

We are buying you controllers instead of your SS :D
05-12-2007, 10:14 PM
teyber

yeah seriously in all the forums i go to, all people do is rave about your controllers... btw people will always give you hits(in this thread) when the quality is as good as this
05-22-2007, 01:26 AM
HoriWanderFuLL

Unseen are you still making these controllers.?? your Forum link to the GSMaster seems to be pretty dead atm..

Cheers Hori
05-22-2007, 07:42 AM
Unseen

yeap. Send a pm if you need anything. Which link you mean?
05-22-2007, 07:48 AM
gsmaster

Heard my name?
I'm live and kicking !!! :)
05-22-2007, 07:49 AM
Jack

Quote:

Originally Posted by Unseen

Which link you mean?

The Phase change controllers thread :)
10-06-2007, 09:40 AM
Unseen

A single stage i made today for a friend from my oc team.

He wanted a ss (and he wanted asap!)only for benchmarks and his cpu is quad.

*Toshiba 9000btu rotary compressor
*3/4hp condeser
*Dimas evap
*Danfoss filter
*Sight glass
*Custom gsmaster simple temperature meter
*r507 gas

http://xs320.xs.to/xs320/07406/HPIM3415.jpg
http://xs220.xs.to/xs220/07406/HPIM3416.jpg
http://xs320.xs.to/xs320/07406/HPIM3417.jpg
http://xs320.xs.to/xs320/07406/HPIM3419.jpg
http://xs220.xs.to/xs220/07406/HPIM3420.jpg
http://xs320.xs.to/xs320/07406/HPIM3421.jpg

On air the evap has temps ~-55. On load i will see in the next days cause i dont have quad now.

Thanks for looking
Christos.
10-07-2007, 07:43 AM
inertiacreep

I believe that cutie is mine...:D Awesome job as usual man :up:
In my eyes it almost looks like a mini cascade (probably cause of the massive condeser). Anxious to see how it handles my hotter than hell B3 quad...
10-07-2007, 08:03 AM
DarthBeavis

dude u rawk!!!!!! holy crap.

All times are GMT -8. The time now is 05:49 AM.

XtremeSystems