930@240 FSB with only 1,1875 volts....!!!!!!!

Printable View

03-18-2006, 09:44 PM
bogdannovaceanu

1 Attachment(s)

930@240 FSB with only 1,1875 volts....!!!!!!!

hi,guys
yesterday i bench with my 930 and look :
240 fsb-1,1875 volt-42 degrees on cpu@23 degrees room temp.........and stable on 2xPrime.........isn't it nice?
03-18-2006, 10:26 PM
{PMS}fishy

Maybe its me, but I don't think thats impressive, crank the volts and lets see what this CPU can really do....
03-18-2006, 10:57 PM
bogdannovaceanu

ha ha ha...........with mach1 is easy to say!!!!!!!!!!!!
on air i bench all 3dmark on 4447mhz and ram on 986mhz (3;5) with 4-3-2-4-2...........with schite ninja from rig and room temp 20 degrees....and i haven't any mods on mobo....what you say now?
03-18-2006, 11:13 PM
AgentGOD

I don't see what's so special?

I've seen that processor reach much higher :stick:
03-18-2006, 11:25 PM
bogdannovaceanu

on these temps? with these lowest voltage? sorry!
03-18-2006, 11:32 PM
AgentGOD

The clock speeds aren't so impressive, IMO. Sorry, just doesn't give much of an excitement. :stick:
03-18-2006, 11:41 PM
mr_knowitall15

in case you people are blind, just plain stupid, or looking for :banana::banana::banana::banana: to talk, its not the clock speed hes bragging about. The fact that its doing it at 1.18 Vcore is pretty insane. Lets see what your amds can run at at that voltage. My predictions....less than 2 ghz.
03-19-2006, 12:36 AM
IronBits

Very impressive!
03-19-2006, 05:23 AM
DaWaN

How much Watt does it use at 1,2v ? Anyway the AMD's can do also pretty good with 1,2V, I think a AMD could do 2ghz easily with 1,2V.
03-19-2006, 07:35 AM
AcEmAsTr

my opteron did 2.4ghz at 1.35v, 1.2v is nothing
03-19-2006, 07:38 AM
zinff

I think it is rather nice to see performance at low volts, congrats! My second opteron 170 ran 2.2GHz at 1.008v dual load. Idle temps were 1c over ambient and loaded was 3-4c higher lol.
03-19-2006, 07:47 AM
bogdannovaceanu

hi men,
this thread is for intel cpu only,go on other thread with your amd!!!!!!!!!!
and thanks,mr_knowitall15!!!!!!!!!!
03-19-2006, 08:41 AM
AcEmAsTr

kind of a pointless thread really, as it's been said before, this isn't cost effective systems.org, you won't run that 24/7, so get it overclocked with more volts damnit.
03-19-2006, 03:05 PM
mtb856

Quote:

Originally Posted by bogdannovaceanu

hi men,
this thread is for intel cpu only,go on other thread with your amd!!!!!!!!!!
and thanks,mr_knowitall15!!!!!!!!!!

Well, technically this is the Extreme Overclocking forum, not the Low-Vcore forum..... it probably would have been a better idea to post it in the Intel cpu section rather than in here.
03-19-2006, 03:43 PM
{PMS}fishy

Quote:

Originally Posted by mr_knowitall15

in case you people are blind, just plain stupid, or looking for :banana::banana::banana::banana: to talk, its not the clock speed hes bragging about. The fact that its doing it at 1.18 Vcore is pretty insane. Lets see what your amds can run at at that voltage. My predictions....less than 2 ghz.

The chips are rated at 1.25v
03-20-2006, 11:49 AM
varzmaster

Variable Vcore more exactly: 1.25 - 1.4 V. :)
03-20-2006, 01:03 PM
lowfat

I that is awesome IMO. I run my 630 @ 3.6, with the lowest vcore my board can do, which is a pathetic 1.3V.
03-20-2006, 01:08 PM
^don.k's^

Quote:

Originally Posted by bogdannovaceanu

ha ha ha...........with mach1 is easy to say!!!!!!!!!!!!
on air i bench all 3dmark on 4447mhz and ram on 986mhz (3;5) with 4-3-2-4-2...........with schite ninja from rig and room temp 20 degrees....and i haven't any mods on mobo....what you say now?

I don't know @low volts, but @1,6volts on air i can bench@4,8ghz with my 920...With a big typhoon and 15c ambient temp. BTW my 920 isn't the fastest pressler, ive seen a lot of 930's doing better than mine...
03-20-2006, 07:06 PM
bogdannovaceanu

Quote:

Originally Posted by varzmaster

Variable Vcore more exactly: 1.25 - 1.4 V. :)

thanks varzmaster,we can continue on crazypc forum!!!!!!
and for all : i'm waiting for new Corsair 8500ul,from itdirect(varzmaster know that..!)
03-20-2006, 07:23 PM
bigval

You people are acting pretty stupid. 1.18vcore at 3.6ghz is awesome, especially for a dualcore. Good job man!
03-20-2006, 07:45 PM
AgentGOD

Quote:

Originally Posted by bigval

You people are acting pretty stupid. 1.18vcore at 3.6ghz is awesome, especially for a dualcore. Good job man!

1. It's a 65nm processor.
2. You are comparing it to a 90nm AMD processor.
3. No reason to call everyone (except yourself) stupid. That is just unnecessary.
4. As the first person that replied stated, this is for Xtreme Overclocking, not a tiny one attempting to conserve power.
03-20-2006, 07:49 PM
bogdannovaceanu

Quote:

Originally Posted by AgentGOD

1. It's a 65nm processor.
2. You are comparing it to a 90nm AMD processor.
3. No reason to call everyone (except yourself) stupid. That is just unnecessary.
4. As the first person that replied stated, this is for Xtreme Overclocking, not a tiny one attempting to conserve power.

sorry man,but look to the title of this thread,is for 900 series,is overclocked to 3,6 giga,and please shut up with your amd...!!!!!!!!!!
03-20-2006, 08:07 PM
eBoy0

Quote:

Originally Posted by mr_knowitall15

in case you people are blind, just plain stupid, or looking for :banana::banana::banana::banana: to talk, its not the clock speed hes bragging about. The fact that its doing it at 1.18 Vcore is pretty insane. Lets see what your amds can run at at that voltage. My predictions....less than 2 ghz.

If just so happens i have some extreme undervolding on my Nf3.. here u go.
http://i5.photobucket.com/albums/y176/eBoy0/stable.jpg
03-20-2006, 10:17 PM
Nacho289

I think that 930 needs some clockin :)

Water or air?
03-21-2006, 09:51 AM
bogdannovaceanu

air!
03-21-2006, 10:00 AM
Magnj

great job, I've been working on lowering my AMD Vcore too...not quite that low though lol
03-23-2006, 09:57 PM
IvanAndreevich

Give it some volts and clock it high.
03-23-2006, 10:02 PM
bogdannovaceanu

i always bench all 3dmark on 4440mhz, fsb 296@1,55volts..........on air with cooler from signature!!!!!!!
03-24-2006, 10:21 AM
Kappy

nice voltage :) nice with cold comps :)
03-24-2006, 12:16 PM
SIOUX

realy nice :toast:
03-24-2006, 05:51 PM
Nasgul

Quote:

Originally Posted by mr_knowitall15

in case you people are blind, just plain stupid, or looking for :banana::banana::banana::banana: to talk, its not the clock speed hes bragging about. The fact that its doing it at 1.18 Vcore is pretty insane.

I agree.

That's one sweat CPU, makes me want to buy a 940 but I must, must wait in Q3 to get a 960.

My 660 is a power hungry biatch, hungrier than my 650.

http://photobucket.com/albums/a291/C...emeSystems.png

bogdannovaceanu, 1.18v @ 240 is cool :toast:
03-24-2006, 07:02 PM
eiceman

The modo doesn't show Any warning of the low voltage?
03-24-2006, 07:36 PM
Sentential

Not too bad. I ran my 920 @ 3.73 for the longest while at 1.2v on air. Wound up being a very good CPU but its no where near the best one. Im doing roughly 4.45 on water with that chip
03-25-2006, 01:07 AM
IluvIntel

Quote:

Originally Posted by bigval

You people are acting pretty stupid. 1.18vcore at 3.6ghz is awesome, especially for a dualcore. Good job man!

Of course it is & well said !

Thats the point of his thread, he is aiming for "extreme efficiency" with cpu/clockspeed V vcore ratio. What is so un-extreme about that ?

All times are GMT -8. The time now is 01:30 AM.

XtremeSystems