-
WR P4 631@6750 Mhz DI cooled!!
-
Ghetto :D
Nice results ;)
-
Good lord. Insane results.
-
impressive results ;)
have you enjoyed or tasted the vodka on the table ?
btw. ATI on the Display and a Nvidia in the Motherboard ... O.o
-
Quote:
Originally Posted by oktavius
impressive results ;)
have you enjoyed or tasted the vodka on the table ?
btw. ATI on the Display and a Nvidia in the Motherboard ... O.o
it isn't vodka, but spirit 98%, in poland we drink often vodka, btw sometimes we drink spirit or spirit&water ->1/1 :toast:
Matiz cool score, in april we will have great fun with LN2 :banana:
-
yes we drink it :D 150ml spirit 95% with 1,2 l coca cola :)
and another thing
its 450 1:1 :D
-
:eek: :eek: :eek:
That's really extreme!
Very good job, peepz! :toast:
-
Great job. Max OC 6750 but max benchable @ 59xx?? Thats a huge difference. Cant wait for the ln2 results.
-
Yea :banana:
Poland O/C Team power on Lan Party Slask. This P4 631 is very good.
Also hmmm max bench is 5.7GHz-5.9GHz :( but max overclocking is veeery good and max hadcore - 3000MHz@6750MHz :woot: and close the bios on P5WD2 full mod.
:D
-
:woot: :toast:
Great clocks and Pi results, the diffrence between max clock and max bench is very big and I think that smtg else then CPU is holding You back in benching on higher clocks, anyway congratulations guys! :D
-
Verryyy NICE ..extremlly good work :slobber:
I think that those tube made by me, brings You so much luck ;) :toast:
Switch to Ln2 and pass 7 ghz :D
But first plase throw away that "imitations" of thermometers :( ... they definitelly don't fit to so proffesional benches . Please buy profi thermocouple like eg. cheap CHY 700T .
Any 16M ?? :p:
Regards
Peter
-
Quote:
Originally Posted by piotres
Switch to Ln2 and pass 7 ghz :D
its imposibble!! mobe have max fsb 450 i we have it!:D :D
Quote:
Originally Posted by piotres
But first plase throw away that "imitations" of thermometers :( ... they definitelly don't fit to so proffesional benches . Please buy profi thermocouple like eg. cheap CHY 700T .
maybe looks like imitations but they are realy good :P
Quote:
Originally Posted by piotres
Any 16M ?? :p:
on the end of firs post :P
-
They cant go past 450Mhz FSB I presume..? The mobo stops there..
-
helo guys
I said this on the tweak.pl but I will say this another time: VERY GOOD JOB!!
when will You attack the bachus_annonym SPI time? :>
-
Quote:
Originally Posted by ent
:woot: :toast:
Great clocks and Pi results, the diffrence between max clock and max bench is very big and I think that smtg else then CPU is holding You back in benching on higher clocks, anyway congratulations guys! :D
I'm willing to put my money on their cooler. With a cooler that can hold load very close to idle like a solid unit, the difference would be much smaller.
-
Quote:
Originally Posted by demek
maybe looks like imitations but they are realy good :P
I don't think so, if they show -67*c in closed box with DI, should be 10*C less ;)
-
The 100% OC, a rare find.
Grats :toast:
-
Impressive...but where's the verification?
-
wow, great one and like fugger mention, 100% oc are rare find.
well done poland :toast:
-
holy!!!!!!!!!
good job guys
-
Quote:
Originally Posted by Gautam
Impressive...but where's the verification?
i wrote in 1st post "sorry for only screens and photos - cpu-z shows total b....it"
-
It looked good in the images and 1.31 is known good with p5wd2
How was it messed up? The author is a member here.
-
over 6100mhz showing fsb like 67mhz and 1200 mhz on cpu
matiz sleep now but when wake up he give here validation file and you look at this
-
-
Quote:
Originally Posted by Gautam
Impressive...but where's the verification?
Thats what Im talking about.
-
who cares what the temp meters look like, if they work, than job done.
nice OC.
what is that, like 110% OC?
-
Quote:
Originally Posted by Kunaak
who cares what the temp meters look like, if they work, than job done.
nice OC.
what is that, like 110% OC?
You don't find it strage that they jumped 600mhz from where they last were?
Not to mention that 450fsb is a rather high speed for that MB.
It might be nice work, but with no CPU-z verify what good is it?
-
Quote:
It might be nice work, but with no CPU-z verify what good is it?
Quote:
Originally Posted by demek
sorry for only screens and photos - cpu-z shows total b....it
Wouldn't matter the cpu-z verification if they were able to finish at least some SuperPIs?
1M and 16M is proof enough, don't you think?
Kikcass job! :toast:
-
Maybe you need my good 661 oc to 7G.:D
My 661 Air cooling 1.39V 5G Stable.
I never use DI or LS to test.
http://andre.kj.idv.tw/661-5G-SP2004.JPG
-
Quote:
Originally Posted by Nasgul
Wouldn't matter the cpu-z verification if they were able to finish at least some SuperPIs?
1M and 16M is proof enough, don't you think?
Kikcass job! :toast:
Yeah, but 6750 isn't a 22 second time.
-
Supposedly this is the fastest cedar mill on the planet by a margin of 600MHz...have we ever seen margins that large before? On top of that, it supposedly suicides nearly 800MHz higher than it can run SuperPI 1M? Ever heard of THAT big of a gap in stability? Furthermore, it's supposedly clocks higher than what Crotale did with a 955XE and LN2, and its a 631 on dry ice...
Oh yeah, to top it off, there is no actual CPU-Z shot. Don't mean to be sour here, but I don't think it's hard to do the math.
Now the 6.1GHz result makes perfect sense, and I commend that. The 6.75 though just can't be real.
-
Quote:
Originally Posted by Gautam
Supposedly this is the fastest cedar mill on the planet by a margin of 600MHz...have we ever seen margins that large before? On top of that, it supposedly suicides nearly 800MHz higher than it can run SuperPI 1M? Ever heard of THAT big of a gap in stability? Furthermore, it's supposedly clocks higher than what Crotale did with a 955XE and LN2, and its a 631 on dry ice...
Yeah, but 955XE is a dual core. :D
I looked at the photos again and I realized that there isnt CPU-Z screenshot from frequency higher than 6.1 GHz and I dont trust AIBooster. Maybe O/C Team when they woke up will show us more ss or some CPU-Z verification link :stick:
-
-
Grats:toast:
Another impresive OC from Poland:banana:
-
AWESOME job over there in Poland.....slightly gay hat but that's another story :p:
why so much gayness in this thread over fishy results............the guy said he'll provide verification so just let him be.............i would understand a reaction like that if the guy claimed he unlocked a single core A64 into dual core and never came back to provide any proof......................a simple CPUz screen or anything...............but noooooooooo the di.ckhead was obviously lying.....i had a problem with that :banana::banana::banana::banana::banana::banana::b anana::banana: but this is different...........it seems genuine to me and i'm sure you'll get your verification
:toast: :toast:
-
Nice result :)
But do you use a DMM to measure temp... :confused:
-
-
Beautiful result! :p: Our polish OC evolved to the international level ;) I am also not sure about 6750 MHz SS, maybe it was really some kind of error? or maybe its just real SS and Cpu-Z have got a bug :banana: Lets wait until april and try some LN2 cooling. If this setup is going to do 6750 stable [SuperPI 1M of course ;) ], we will be sure that this result is correct :slapass:
-
-
nice overclock! good!:up:
Dry Ice Cooling is Grats!:) Any pics of 32M setup?
-
All tests were made on less than 6GHz. Why stupidity over not know show 6GHz cpu-z and so, we lack validation from cpu-z.
But have for this confirmation of result 60 persons observing it perfomance (doings) and representatives of polish press.
Sory 4 english :p:
-
Your English isn't so bad ;) Change the signature :D In Poland we don't practise 32M competition ;) Only 1M and 16M rulez :banana:
-
hehe I like thoose kinda picz - great results :toast:
get this baby benchstable >6 GHZ must be possible ^^
-
Quote:
Originally Posted by SoF
hehe I like thoose kinda picz - great results :toast:
get this baby benchstable >6 GHZ must be possible ^^
on the caskade or ln2 :D :D :D
-
That's Awesone!.
Great Core Cedar Mill.!;)
-
Quote:
Originally Posted by demek
on the caskade or ln2 :D :D :D
In april I`ll bring my cascade, so we can do some nice benches when LN2 will end ;) what do you think about it ? :cool:
-
Quote:
Originally Posted by demek
on the caskade or ln2 :D :D :D
I'll be watchin' this :cool:
-
Quote:
Originally Posted by LukeXE
In april I`ll bring my cascade, so we can do some nice benches when LN2 will end ;) what do you think about it ? :cool:
The most powerful cascade in Poland and beautiful, well overclocking Cedar Mill -> I like it ;) :slobber: I will trial your work :rolleyes: Good luck :banana:
-
Nice OC !!! But that big difference (in SS and superpi) is maybe a PSU issue... Or the high FSB is killing the board's stability. Anyway it's the best 631 i've seen and it rocks :toast:
-
It was powered by Huntkey 350W with GF 7800GT on board :eek: :slobber:
-
nice job guys
I also don't think that CPU-z validation is necessary cause there was plenty of people watching
-
1 Attachment(s)
The moment of close mobo bios.
-
This chip is really some power... With ln2 i think you will have a awesome pi time and mayb some records!
-
Quote:
Originally Posted by Waus-mod
This chip is really some power... With ln2 i think you will have a awesome pi time and mayb some records!
Ln2 is planed on 22 april
come to poland and you will see this :D
its will be modding fairs :)
-
-
HI, congrats on that good 631.
Some questions:
- Have you got any cold bug problems ?
- Have you tried an p5wd2-e ?
Coz ive got cold bug problems with an 920, didnt try my 631, but one teammate tested another 631 on a p5wd2-e and got cold bug problems... WTH ? I thought on going back to a p5wd2 since seems more cold friendly, but i'd like to be sure... :stick: Anyone have some tips ? Thx
:toast:
-
Quote:
Originally Posted by ^don.k's^
HI, congrats on that good 631.
Some questions:
- Have you got any cold bug problems ?
- Have you tried an p5wd2-e ?
Coz ive got cold bug problems with an 920, didnt try my 631, but one teammate tested another 631 on a p5wd2-e and got cold bug problems... WTH ? I thought on going back to a p5wd2 since seems more cold friendly, but i'd like to be sure... :stick: Anyone have some tips ? Thx
:toast:
Hi :)
Thank's
We don't have cold bug problems and no tested p5wd2-e with 631.
In that case it looks on it that p5wd2-e it does not like chill.
-
-
Quote:
Originally Posted by ^don.k's^
HI, congrats on that good 631.
Some questions:
- Have you got any cold bug problems ?
- Have you tried an p5wd2-e ?
Coz ive got cold bug problems with an 920, didnt try my 631, but one teammate tested another 631 on a p5wd2-e and got cold bug problems... WTH ? I thought on going back to a p5wd2 since seems more cold friendly, but i'd like to be sure... :stick: Anyone have some tips ? Thx
:toast:
a friend of mine havde same probs with p5wd2-e and 920,though fugger has no probs with an ee cpu,so it could actually be the 920 that have a bit off cold bug
-
damn! very nice man!
i'm surprised no one has picked up a 661 and stuck it under LN2... someone can probably knock out some of the 670 WR's with one of the 65nm 661 chips :slapass:
-
Quote:
Originally Posted by vanovich
a friend of mine havde same probs with p5wd2-e and 920,though fugger has no probs with an ee cpu,so it could actually be the 920 that have a bit off cold bug
i dont think fugger has gone colder then single stage
-
With the tripple stage I put up a 6.2Ghz pi run of 21s
The cold bug on Presler is no where near as bad as AMD, I have a valve to adjust my start temp and it is very quick to respond so the cold bug doesnt give me a problem.
I lay on the colder temps (>-100c) when needed and run at ~ -70c while setting up and restarting. This helps prevent freezing over and if I adjust my second stage, I can drop back to an even warmer temp of -60c. I believe that would be too cold for a cold bugged AMD to start at.
My restart problems start around -76c, -86c on the evap for my 955 EE.
-
Quote:
Originally Posted by FUGGER
With the tripple stage I put up a 6.2Ghz pi run of 21s
The cold bug on Presler is no where near as bad as AMD, I have a valve to adjust my start temp and it is very quick to respond so the cold bug doesnt give me a problem.
I lay on the colder temps (>-100c) when needed and run at ~ -70c while setting up and restarting. This helps prevent freezing over and if I adjust my second stage, I can drop back to an even warmer temp of -60c. I believe that would be too cold for a cold bugged AMD to start at.
My restart problems start around -76c, -86c on the evap for my 955 EE.
Fugger I have no restart problem with my 955XE .. it can even restart while pot is at < -190C .. I also recieved a 965XE but it is an odd one. :) Will try it on LN2 soon..
-
awesome result guys ,,Polska rządzi rulezem" :D
-
-
would clockgen (or something similar) allow you to get past the 450mhz fsb mark since that's all you can do in the bios?
-
clockegen, aibooster or bios - finich at 450
but LN2 is coming :D
-
-
1 Attachment(s)
hey mate, i see a question that i have to ask, WHO THE FSCK IS THAT CHICK?..she seems hawt!
nice oc btw lol
-
mmmm lemme guess....no chicks in jail :p:
-
Quote:
Originally Posted by Hound
hey mate, i see a question that i have to ask, WHO THE FSCK IS THAT CHICK?..she seems hawt!
nice oc btw lol
its devil k-ce girlfriend... :P
-
My congratulations goes to Poland. Strongly impressive Overclocking for a PENTIUM 631. Here in Germany you could see on LAN-Partys only Case-Modd-Kiddys with expensively Hardware without any Overclocking-Skill but this is very pretty.
I repeat, very nice – hold on and stay cool overclocked.
-
Well If it's too old a thread to comment on that is just too damn bad. It is a great accomplishment! I really like all the pics you posted in your thread of all those involved in this achievement. That goes to those who did the achievement and to those who got to be there to witness it. Looks like it was a good time for all. Seems all we usually see is a pic of a board that looks like a mess along with a shot of the multi-meter. your pics kinda personalize the event. Thanks and congrats!!
Weldzilla
-
Quote:
Originally Posted by oktavius
btw. ATI on the Display and a Nvidia in the Motherboard ... O.o
LOL I just noticed that
-
Congratulations guys,
I'm very proud of you, hope we(Polish) can show even more then that.
And guys we don't drink that much Vodka/alcohol in Poland, don't belive them.
I'm currently in London and i see more drunk English ppl on streets than in home.
About girls, if you want see relly nice chicks go to Poland for vacation, London can hide.
( If you see nice blond girl in London she's Polish :) )
Greetings
-
Quote:
Originally Posted by sobol
( If you see nice blond girl in London she's Polish :) )
Greetings
Yeah. What i have to say in polish to get some :banana::banana::banana::banana::banana:? :banana:
-
Impressive though expected for something that does ~4.5ghz on stock cooler. :)
Perkam
-
