Printable View
My friend Andrea(Dimas)of PCTuner.it is working for my first cascade...
Expecting under -100°C evap temp when it will be done:)
1st stage compressor from 1/2HP and second from 5/8HP.
R402 for 1st stage and R1150 for the second stage:)
Here is the link to the discussion 3d in PCtuner forum...
Link:
http://forum.pctuner.net/forum/showthread.php?t=64537
thanks for posting nachthy ;) the works will start as soon as possible, now i'm waiting for the bottom of the case, hope to get it quickly....
TKS to you my friend!!!:D :toast:Quote:
Originally Posted by Dimas
Now I have find a good chip that is waiting to be frozen:D
http://img108.imageshack.us/img108/7303/cpu0pw.th.jpg
Wow man that's looking GREAT! Dimas' work is definetly up there with the best so it should turn out AWESOME! Keep us posted with ur results, hopefully your new 57 will fly under those temps!!! :toast:
Brandon
TKS...DIMAS has already complete a -100 dual cascade:)Quote:
Originally Posted by Fhqwhgads6680
This is his second work and I'm sure to be happy when it will be done...
I hope my FX-57 don't have a low CB...
This is a fast test under Vapo LS:
http://img234.imageshack.us/img234/7299/spi35714vx.jpg
wow...and at pretty low voltage for that OC! my opty at 1.71v can't get past 3.255 on my single stage....I need a more worthy chip lol! What the highest you've benched it at?
GL mate!
Brandon
I have to say that my EX0516(R.I.P) can close SPI 1M @ 3612 with 1.631V...Quote:
Originally Posted by Fhqwhgads6680
But has the CB @ only -40...
I hope that this 0530 can go down @ -60 or lower:D
What motherboard are you using as I notice your using Win XP64?
Nice OC results :D My FX55 will do 3.1Ghz with 1.45v on air :D
Boardy
Quote:
Originally Posted by boardy
I use a DFI UT lanparty nF4Ultra-D (623-3).
I don't have install driver of any kind...I use only fo SPI test...
It's not bad but @ 3584 it's very unstable:mad:
This was my dead 0516:
http://img112.imageshack.us/img112/3...31725no9iy.jpg
Wow thats a beastly chip. What steeping? those 051x were mostly CABCE's weren't they? hopefully you CABNE will enjoy being frozen :) I have a feeling it'll clock very well under cascde...most CABNE's do very well from what I've seen with the opteron craze.
TKS...it was a CABCE0516WPMW...Quote:
Originally Posted by Fhqwhgads6680
I hope that the 0530 like the cold:)
Now DIMAS is waiting for the cascade's Case and then the works continue:D
This is my CABCE 0522 XPMW
http://gallery.greatestjournal.com/a.../929462/fx.jpg
Just polishing off my cascade and then i will test it
oh yeah sorry 2 x 1gb gskill and 46 processes running in the background when i did the 1 meg run lol
What cooling used in this screen?Quote:
Originally Posted by fatty
Mach 2?:)
A little UP, the case it's ready:D :toast:
http://img277.imageshack.us/img277/559/case3oa.jpg
Wow the case looks awesome.
I got to see that case today, and was wondering who it was for :D
It looks fantastic. Ideal configuration and should make a very nice package for your cascade :woot:
I may have to sweet talk Dimas into making me one of those beauties for mine :D
Gray
Wow that is a hell of a flex line.
i rly like thos clean units (case)!
TKS, I also like very much this case.:D
It's perfect for my PC room.:)
I'm waiting to see the cooling performance:woot:
It was laser cutted.Quote:
Originally Posted by n00b 0f l337
A thermostat control the start of the second stage when a X temp it's reached:D
Laser :nono: I would bet a cnc plasma cutter.;)
could also be cut on a water jet
lasercut...waterjet in there cost a lot...Quote:
Originally Posted by wdrzal
Dimas has answer for me:) ;)
Wow ,laser and water jet cost about the same but lasers with enough power to cut metal aren't cheap, was it a co2 laser ? who was the machine made by? do you know its cost ?Quote:
Originally Posted by Dimas
Case looke very nice.
here in italy water jet cost more, this metal is 1,5 mm thick, the machine use argon, dont' know who made and costs,sorry...Quote:
Originally Posted by wdrzal
Andrea, when you have other pictures can you post it?
It's right that you post because you are the builder.:D :clap: :worship:
LOL...that's not low vcore...THIS IS LOW VCORE (don't mind the crappy time, I've done better :p: )Quote:
Originally Posted by Fhqwhgads6680
http://cryo-laboratory.com/upload/us...4/13x2771m.jpg
@ nachthymnen & Dimas: WONDERFUL, WONDERFUL build guys! I can't wait to see the finished product :toast:
thats a nice cascade dimas has made you there nachthymnen:toast:
As to you guys with nice fx57, i think before beats ya all with his 4.2ghz chip;)
http://i4memory.com/showthread.php?t=2510
TKS guys...yes, Dimas it's making a beautiful work:woot:
I can't wait for test it on my FX-57:D
@ s7e9h3n: Dimas it's the builder;)
I'm the buyer:D
I know ;) Just wanted to complement you both :DQuote:
Originally Posted by nachthymnen
wdrzal: Laser is less expensive here in Saskatoon (canada) as well. I use a company called Siemens laser works, they're fairly reasonable, and can cut thick metals. I think it's a 6000 watt laser or something, no idea what type. they have about 15 lasers on site, it's a pretty huge place.
http://www.siemenslaser.com/
ahaha:DQuote:
Originally Posted by s7e9h3n
TKS...now it's time to paint the case in black and then in about 2 weeks it will be ready to freeze:banana:
Case painted in black:D
In the next days new photos and, around the half of July the beast will arrive in my room:toast: :woot:
2 pictures of the case:
http://img231.imageshack.us/img231/7950/img56211sb.jpg
http://img231.imageshack.us/img231/6268/img56224xe.jpg
On the next week probably other images:toast:
Great work Dimas - there is some really nice stuff coming around now. People are starting to perfect the case making.
Ok guys, probably no other pics until next Saturday:D
99% next Saturday(15July) Dimas comes to my home with the beast:woot:
http://www.pc-phasechange.it/nactycascade/IMG_5659.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5660.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5661.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5662.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5663.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5664.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5665.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5666.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5667.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5668.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5669.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5670.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5672.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5673.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5689.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5690.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5691.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5692.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5693.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5694.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5695.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5696.jpg
http://www.pc-phasechange.it/nactycascade/IMG_5697.jpg
finished, tomorrow tuning:D
Andrea, it's one of the most beautiful thing I ever see:worship:
Wow, I can't imagine that Saturday will be here!:slobber: :woot: :toast:
Tomorrow the cascade will be here.
Andrea have finish today and after some test he obtain an impressive -105C evap temp with 30C ambient temp:woot:
Tomorrow the bench with my FX-57.
Last pictures, tomorrow will be here:woot:
http://img351.imageshack.us/img351/6238/img5707sw5.jpg
http://img108.imageshack.us/img108/19/img5708wy4.jpg
http://img108.imageshack.us/img108/7432/img5709rh8.jpg
Ambient temp:
http://img108.imageshack.us/img108/7039/img5704gr5.jpg
Evap temp:clap:
http://img111.imageshack.us/img111/8388/img5703qs6.jpg
I think DIMAS must be added in the -100C club member!!:toast: :clap:
GRAZIE ANDREA!
wow this looks sweeet. dimas really did a great job with your cascade, hope your FX can stand the cold ;)
great temps for 30 ambiant bet you cant wait to get that hooked up
TKS!Quote:
Originally Posted by SoF
Yes, Dimas did an amazing work, I love this Cascade!
Tomorrow will be the big day, I hope to close a SPI 1M @ 255x15:D
Yes, temps looks great!Quote:
Originally Posted by bazx
I think that this night I will not sleep:D
Bad news guys, my CABNE 0530 APMW it's colbugged @ 204FSB:eek: :(
No chance to do any bench:(
But I'm very happy of the Cascade!!!:banana: :woot:
26° ambient and 1hour of working:
http://img57.imageshack.us/img57/6696/69kh4.jpg
http://img152.imageshack.us/img152/9936/61fulliv3.jpg
http://img270.imageshack.us/img270/4439/673415ro6.jpg
Some pictures:
http://img79.imageshack.us/img79/923...7160004vk9.jpg
http://img206.imageshack.us/img206/8...7160007js3.jpg
"Warming UP" :D
http://img206.imageshack.us/img206/7...7160013sb5.jpg
http://img206.imageshack.us/img206/9...7160008xe4.jpg
http://img425.imageshack.us/img425/1...7160010co0.jpg
http://img425.imageshack.us/img425/6...7160011mk0.jpg
The great DIMAS with his creation :worship:
http://img425.imageshack.us/img425/4...7160014fj1.jpg
200x18:
http://img206.imageshack.us/img206/3...7160017qw7.jpg
http://img206.imageshack.us/img206/9...7160019ko1.jpg
http://img280.imageshack.us/img280/8...7160026fp0.jpg
For me this is the most beautiful Cascade I ever see:clap:
http://img280.imageshack.us/img280/7...7160027sr5.jpg
http://img115.imageshack.us/img115/9...7160029il1.jpg
8mm of insulation can't stop the condensation :eek:
http://img375.imageshack.us/img375/3...7160034ql1.jpg
You guys are hardcore...
the 0530 is one of the best cold loving chips out there
you sure got bad luck with this one
what vcore you got ?
any dividers?
ram settings and maybe we will work out whats up
hehe, TKS:)Quote:
Originally Posted by rob[GL]
Dimas it's a great person!
Very available and funny!!!
21 years old and he do this work:woot:
I know that the 0530 it's one of the best cold loving chips but mine not:(Quote:
Originally Posted by bazx
I have try @ 205/210/220/250 but no chance to come in win.
We have try all kind of setting but nothing.
From 1,65 to 1,71V V-core.
Try to clock with Clock Gen but when the bus it's over 204 pc freeze:(
Over -60 @ 3,6GHz with 1,68V and 25/26° ambient.
Time to buy an E6700:D
or a E6800 :D
That Dimas cascade is realy nice and good !!! Take good care of that baby :)
TKS Overklokk!:)Quote:
Originally Posted by Overklokk
Yes, I will treat like an oracle:worship:
I really like my Cascade also for the aestethics, it's very beautiful and powerful.
Andrea use a 15,6CC(1/2HP) and a 13,8CC(3/8HP) compressor but the performance are great.
Now I need a better CPU:(
First stage during the cooling down:
http://img142.imageshack.us/img142/5877/dscf1021vq1.jpg
Second stage pressure:
http://img142.imageshack.us/img142/9355/dscf1025tt1.jpg
Evap:
http://img218.imageshack.us/img218/1702/dscf1026ia7.jpg
Try again to do some bench but no chance:(
Waiting for X6800E around 15 of August:banana:
My FX-57 hate the cold and this night total unstable in WIN:mad:
http://img525.imageshack.us/img525/7...7190003sj1.jpg
BIOS Monitoring with CPU at 3400mhz with 1,71V:
http://img55.imageshack.us/img55/933...7190005qm2.jpg
http://img116.imageshack.us/img116/2...shot002fq5.jpg
http://img45.imageshack.us/img45/519...shot003ky0.jpg
:clap: Man that thing looks awesome can'nt wait to see that on the X6800E but in the mean time have fun with your new TOY.:banana: :banana:
You could pick up chicks with that. Amazing...
TKS:)Quote:
Originally Posted by predator500
I also can't wait for X6800:slobber:
I must sell my AMD rig first to buy Conroe:rolleyes:
That cascade looks and works very, very nice :) Congrats for having that amazing stuff !
TKS!Quote:
Originally Posted by LukeXE
Yes, I really love my Cascade, it's one of the most beautiful I ever see and also the performance are great.
Can't wait for this hot summer's end:mad:
After 2 hours of bench with the Cascade my room it's terribly hot:mad:
That is just awesome...
TKS, probably next week I will finally try it with an X6800retail and this time I hope to haven't CB problems:rolleyes:Quote:
Originally Posted by Plywood99
Backplate may be sweating because its touching moutning bolts.
Yes, it's sure.:rolleyes:Quote:
Originally Posted by n00b 0f l337
I will try to put some foam between the plate and the bolts.
Insulation testing on 1 of my 2 P5W-DH, wendsday X6800 will be here, another foam layer will be applied:
http://img135.imageshack.us/img135/4205/coibay9.jpg
nice:toast: hope that mobo isnt cold boot bugged at -50c like my asus mobo
are you gonna put a new air cooler on the NB ?
TKS:)Quote:
Originally Posted by kayl
Uh, CB @ -50:(
Bad news, I have laeved AMD for CB problems and now I risk CB for the mobo:(
At the end of the week I think to make a Cascade run.
On the NB I put the TT extreme spirit2 for now and then a good WB:)
Nice-looking system. Good luck.
Many tks:)Quote:
Originally Posted by sierra_bound
It's around 8 months that I fight with AMD CB, now I hope to be free of this nightmare:rolleyes:
With a Cascade it's not possible to buy AMD:(
Can be a good or bad idea to put some insulation on the condenser?
http://img441.imageshack.us/img441/9915/coimd4.jpg