The Official Team Group UCCC Standard & OC Stability Bench

Folks, time to offically introduce Team Group's another power 2GB set Xtreem series,
that is, Overclocking DDR 500MHz Dual Channel Cronus series UCCC

From the official webiste, its specifications shows as followed:

Model / Speed:PC4000 DDR500MHz
Capacity: Dual Channel Mode
CL rated: 3
Team Group part number: TXDR2048M500HC3DC

Official description:

" The Team Xtreem UCCC series is a line of high-performance memory modules bringing you advanced speed

grades, and low latencies, and especially designed for performance enthusiasts who want to challenge to

the limits of performance without worrying about data loss or corruption, mysterious intermittent

errors and display problems, or worse-the dreaded BSOD!

The modules are based on the Samsung UCCC memory IC, a new generation chip produced under

o.11 micron processing. This memory IC achieves very high frequencies (more than 500MHZ, against a

standard of 400MHZ), at a low voltage（less than 2.7V under 500MHZ operation).

In order to achieve maximum performance, the SPD of Xtreem UCCC series is specially designed under

500MHZ CL=3-4-4-8 in dual channel mode. In BIOS on motherboard, only FSB item needs to be changed from

200MHZ to 250MHZ.
The ‘Xtreem UCCC’ series ensures extreme performance without the fear of unexpected interruptions.

And, remember, each Xtreem module (as with any TeamGroup ram module) is lifetime- and satisfaction! -

guaranteed.


*Warranty Void in cases of manmade failure or natural disasters."

So, that's see the module standard and Some overclocking stabilities bench:

The Ram set:

http://www.ocxtreme.org/onepagebook/.../tgiuccc01.jpg

well I told you guys before, 0552 UCCC has somethig fun to do:D..sit tight:D

http://www.ocxtreme.org/onepagebook/.../tgiuccc02.jpg

Please note, this ram is rated @ DDR500 3-4-4-8 2.7v

Let's see what can I do:D

Testbed:

Motherboard: DFI NF4 Ultra-D, bios 1114
OS : Windows XP sp2
Video card: Asus NV 6200 TC
Cooling: PCICE Single stage -50c loaded
CPU: AMD 4600+
PSU : SilverStone 600w ST60F
HD: Western Digital 2500KS Raid 0


Let 's see the super pi mod ver.1.5
oops, looks like I set it as 3-4-3-8

1m:

http://www.ocxtreme.org/onepagebook/...ddr500pi1m.jpg

8m:

http://www.ocxtreme.org/onepagebook/...ddr500pi8m.jpg

now because i use dual core processor, so by running dual 32m, I will enclose digital camera shots
, 2 shots for ddr500. Hope that would verify my results.

1. run 1

http://www.ocxtreme.org/onepagebook/...00pi32md01.jpg


2. finished:

http://www.ocxtreme.org/onepagebook/...00pi32md02.jpg

windows captured:

http://www.ocxtreme.org/onepagebook/...dr500pi32m.jpg

************************************************** ************************************************** **

Well here you go, now, how many vdimm you assume this can be run about DDR600? ;)

check it out.:D
All the benches are non- reboot running.

1m:

http://www.ocxtreme.org/onepagebook/...ddr600pi1m.jpg

8m:

http://www.ocxtreme.org/onepagebook/...ddr600pi8m.jpg

now, let's bring it on dual 32m, now, I have 5 pics from digital camera;)
and I show everything I can.

initial run~5th:

http://www.ocxtreme.org/onepagebook/...00pi32md01.jpg

6~11


http://www.ocxtreme.org/onepagebook/...00pi32md02.jpg

12~17


http://www.ocxtreme.org/onepagebook/...00pi32md03.jpg

18~22


http://www.ocxtreme.org/onepagebook/...00pi32md04.jpg

23~finished:


http://www.ocxtreme.org/onepagebook/...00pi32md05.jpg

Windows cap:


http://www.ocxtreme.org/onepagebook/...dr600pi32m.jpg


now, some more extra...:p:

DDR620...spi 1m and cpu verify..
Take ca guess, will I break WR for 2gb set database?:D


http://www.ocxtreme.org/onepagebook/...ddr620pi1m.jpg

http://www.ocxtreme.org/onepagebook/.../ddr620cvf.jpg


Thank you for all those who love TeamGroup.


OPB

300 very sexy

Quote:

---

Originally Posted by Onepagebook

DDR620...spi 1m and cpu verify..
Take ca guess, will I break WR for 2gb set database?:D

---

still got 31m more to go... but i think you can do it ;) just make sure you go for 312mhz, i saw some ballistix somewhere at 311mhz :D

i'm liking those 552 UCCCs :toast:

:woot: Got my set yesterday.. they both work individually at 280 at least with 2.63v (didnt try farther Mhz), but I can't get dual channel over ~273 without tons of errors in test 5. (>15000/pass). I think my mem controller is t3h suck :( Or maybe it's the mobo. Though I still haven't brought them up to the rated voltage..

Screenies to come, I have some video encoding/cpuburn to do tonight but I will test some more 32m tomorrow hopefully.

FYI, since apparently I can't run very high MHz with this CPU I've bought some of the Team 3-3-2-8 PC4000 to run lower MHz/tight timings and I will be selling this :) Not bad sticks at all but something in my setup can't handle it.

Wow, Those are extremely nice 2GB sticks. UCCC at its best!

OPB: Please give me drive strength on utra D and expert.
Many thanks.

Kev, I know you can find it in those sticks to get the WR and with your skills it won't take too much searching. Not thinking of shooting for a WR those are some killer sticks.

:toast: Bro
Tim

Impressive clocks on that set, Kevin! :up: Let's see if there is anything more left it it!
There's more and more of those "DDR590-600 8-4-4-3.0-1T" sticks from different manufacturers, popping out everywhere and it looks like TG joined the pack...
Good Luck! :toast:

ok, the rule for running strength thing under DFI NF4 series board is as followed:

1. When you have phase change cooled, you wanna use higher level of strength values, i.e.

ultra-D: 7/3 (data) or 8/3
Expert:7/4, or 8/4

2. Air cooling or normal water cooling,
either 5/3 ~7/3 would work just perfectly

***********************************
decrease the strength can normally get higher fsb but it all depends on your memory controller on your CPU

how to find the proper value set?
try the strongest first, if cause unstable, decrease data strength first , then driving strength. i.e.

7/3--->7/2--->7/1---->6/3....

hope it helps.

*************************************************

Michael, looks like you're promoted huh?:D Congrats.!!
I will challenge the DDR622~625;)


OPB

Nice ram there OPB:toast: Any retail yet? I want it:)

Bro, it has been out for long long time...:D

Quote:

---

Originally Posted by Onepagebook

Bro, it has been out for long long time...:D

---

Really? I guess I am stuck with this Gskill GH way too long:D
I will try it....Nice ram:toast:

nice!

i submit my new tests..:)

Quote:

---

Originally Posted by Dumo

Really? I guess I am stuck with this Gskill GH way too long:D
I will try it....Nice ram:toast:

---

GH? Good ram;)

make sure you buy the lastest one (0552):toast:


Gigi, your results are always let me drool.:clap:

Good to see you back Kevin. Congrats with your legend status ;) Nice TEAMGroups, need to try those ones asap in Europe.:woot:
If that is the average potention, then its really great man.

Is 552 the latest date of UCCC?

hey , thank you buddy.

not sure if 552 is the lastest, I thought you might know better than me though. but I am pretty sure 552 is a good date code.:)

I have some 0601 Gskill UCCC as well as the Team

I believe 0602 is the latest UCCC, at least the latest I have seen.

wow... nice job there Kev...:toast:. I want to test some UCCC from Team too :D.

Quote:

---

Originally Posted by onepagebook

Folks, time to offically introduce Team Group's another power 2GB set Xtreem series,
that is, Overclocking DDR 500MHz Dual Channel Cronus series UCCC

---

Btw are you sure this is Cronus series ? Cause i saw in Team website, Cronus using Micron -5B chip, not Samsung UCCC..

Nice job OPB :toast:

wouldnt mind testing some myself

... don't see any other place in the US right now. Link-a -dink-a-doo. Any other retailers carrying this item yet?

Quote:

---

Originally Posted by Onepagebook

GH? Good ram;)

make sure you buy the lastest one (0552):toast:


Gigi, your results are always let me drool.:clap:

---

thanks SIR ;)

Quote:

---

Originally Posted by gundamit

... don't see any other place in the US right now. Link-a -dink-a-doo. Any other retailers carrying this item yet?

---

Thanks for posting this

Impressive results, as always:D

Here in Europe those modules cost about 200€, not bad deal.

Other thing.. -50c loaded coldbug less X2? Not bad, I'd like to see how high that cpu can go:p:

:toast:

Quote:

---

Originally Posted by ozzimark

i saw some ballistix somewhere at 311mhz :D

---

Maybe these? :D;)
http://img96.imageshack.us/img96/717...ello6fs.th.jpghttp://img109.imageshack.us/img109/8...6x104my.th.jpg

Very nice memos you have there OPB :woot::up:
Looks like UCCC keeps getting better & better:clap:

Quote:

---

Originally Posted by Onepagebook

hey , thank you buddy.

not sure if 552 is the lastest, I thought you might know better than me though. but I am pretty sure 552 is a good date code.:)

---

hehe, well i was much into the TCCD wave but haven't got time to get the latests UCCC date-codes since i am not G.Skill anymore.

MY UCCC by TEAMGROUP

3.4.3.8

http://img127.imageshack.us/img127/3...43816mb9va.jpg

http://img156.imageshack.us/img156/4...34381mb4ap.jpg

Nice sticks. I need to pick up a set of these :D.

Quote:

---

Originally Posted by Benny Lodewijk

Btw are you sure this is Cronus series ? Cause i saw in Team website, Cronus using Micron -5B chip, not Samsung UCCC..

---

there's 4 different sticks in the cronus line:

one is the micron cronus using 5b F
one is the samsung using UCCC
two more are infineon, pretty sure one is CE-6, rated for 3-3-2, and the other, not sure, rated for 2.5-4-4

Quote:

---

Originally Posted by kakaroto

hehe, well i was much into the TCCD wave but haven't got time to get the latests UCCC date-codes since i am not G.Skill anymore.

---

Smart Choice EVER.!!!:toast:

Gigi. Very good job,
try trrd as 3, RP as 5.5ns you might hit 300 without problem.;)

290mhz 3.4.3.8:)

http://img213.imageshack.us/img213/5...43832mb7gy.jpg

Nice UCCC you got there gigi77 :cool: Try 300Mhz , you are teasing us!

I think its rhe first time I saw UCCC doing +275@3-4-3. What data-code are they?

Good job Gigi:toast:

thanks go UP

ya, very nice results gigi,
BUT, I think it still got room to improve.;)

Nice sticks you got there onepagebook but why is 600 ok standing on the sticks in the first picture?

Are the pretested DDR600 ok?

cuz I have 4 sticks of them to test, the other 2 600 not ok has been send them back to TW HQ.;)
Then intention of doing this is what I wanna compare with TCCD (most likely )ddr600 results in 3d mark.
This is one of my project.
the second project is I will run 236x14 with 233 upper divider on fx60 ;), figure the ram frequency;)
compare with 4600+ run @ 275x12 1:1 on 3d marks to verify 4600+ L2 512k won't be worth than fx60 L2 1mb.
----> This would the OPB-S7e9h3n No.2 project.
OPB

hi. i don't want to high jack this thread.. but...

did you get your set directly from TW HQ?

are there any retailers in the US selling these?

also have you tesed ones with Micron IC's (since they have better default timing)?

Quote:

---

Originally Posted by shimmishim

hi. i don't want to high jack this thread.. but...

did you get your set directly from TW HQ?

are there any retailers in the US selling these?

also have you tesed ones with Micron IC's (since they have better default timing)?

---

micron, I/a, UCCC all has been carried by Tankguys
and would be available in 2 days(Monday).:toast:

ahh. nice.

thanks a lot! :)

wow, gigi's ram actions again :D
btw, is the rams memtest stable at those 3-4-3-x timing?

currently, i juz shifted from neo2 to my old epox 9nda3+, and i seem to be able to reach higher speed compared to neo2 [255 unstable]
http://img50.imageshack.us/img50/681/untitled4bh1.jpg
http://img364.imageshack.us/img364/5...34481qb.th.jpg
lookin good...but its not memtest stable :(
cant expect much from a nforce3 board.. thats why the timing is loose O__o

well, juz to share some nforce3 actions :D

again, memtest can NOT be relible for testing system stabilities.

Quote:

---

Originally Posted by Onepagebook

again, memtest can NOT be relible for testing system stabilities.

---

but in my case, i got 50 errors every test#5 loops :eek:
oh well, since OPB says it, i believe it :D
besides, im priming now while surfing n irc
as long i get prime more than 6hrs stable + superPi 32M stable, im lovin it
p/s: blend pass 2hrs 10min mark now...
:woot:

OPB can you please make some 3D tests :)

list your condition, and I will run it

ddr 600 enough?
I think I have it run post somewhere, and people just never pay attention


** I will start from now,

1.I/A series run on ddr500, 2-3-2
2.UCCC: DDR600, 3-4-4
3.mircon 5b-f ddr550 , 3-3-3

I think DDR600 will be more than enough to empty TG storage :)
BTW are those stick are some cherry picked ? Or you just ordered two kits and one isn`t so good as it supposed to ?

Cooper, that is kinda no doubt question, so leave it for your imagination.

I have post the results of request from you. you will put it at home page? that would be great.:p:

http://www.xtremesystems.org/forums/...ad.php?t=93136

Quote:

---

Originally Posted by gigi77

290mhz 3.4.3.8:)

http://img213.imageshack.us/img213/5...43832mb7gy.jpg

---

:woot: Gigi ! Good Job ! :p: You always make us amazing.

I got a Kingston Value RAM 1GB DDR400 using Samsung UCCC chips, week 0552,

but this stick not able to do 250MHz, 3-4-4-8,1T, 2.7v Prime not stable :(
will give me error with 1min...
But 32m SuperPI can passed will no problem.

kinda disappointed me ...

Quote:

---

Originally Posted by ahpaul82

I got a Kingston Value RAM 1GB DDR400 using Samsung UCCC chips, week 0552,

but this stick not able to do 250MHz, 3-4-4-8,1T, 2.7v Prime not stable :(
will give me error with 1min...
But 32m SuperPI can passed will no problem.

kinda disappointed me ...

---

uccc's stock speed is 200mhz out of samsung's fab, it needs to be a slightly special set to do 250mhz

though it's odd... not 1m stable but 32m? at identical settings?

Quote:

---

Originally Posted by ozzimark

uccc's stock speed is 200mhz out of samsung's fab, it needs to be a slightly special set to do 250mhz

though it's odd... not 1m stable but 32m? at identical settings?

---

Yes, at identical setting.
in fact i got 2sticks of Kingston ValurRAM 1GB DDR400 using SAMSUNG UCCC Chips, one is the one who using all Week0552 chips,
another stick is using week0552 + 0549.

the stick which using mix chips able to do 260MHz, 3-4-4-8,1T,2.7v 32m SuperPI passed. (haven't try Prime yet)

Screenshot here :
<a href="http://img138.imageshack.us/my.php?image=uccc260mhz344827vsuperpifinish.png" target="_blank"><img src="http://img138.imageshack.us/img138/3296/uccc260mhz344827vsuperpifinish.th.png" border="0" alt="Free Image Hosting at www.ImageShack.us" /></a>

i just wonder how come the stick who all using week0552 cannot performance well only... :(

Just to ask .... so this 0552 [UCCC batch] and 0609S [Team Xtreem Batch] is a pretty good batch of UCCCs ?

Nice clocking anyway ! DDR620 is sure some good stuff !!!

OPB,

Are these, or any of the Team Group RAM avaiable in the UK???

regards,

Matt

1. Guys, here is what I figured out from testing over 20 pairs of UCCC
if you have 0552, then go for at least 280 @3-4-3-x; some of them even can do up to 285~290mhz near 2.7v

2. There is no need to give too much juice on this UCCC,2.67~2.7 might be the sweet spot


**Matt Hirst, you can pm me about your question. Thank you.:)

i wonder does SuperPI 32M passed can consider system stable or not ?
i can get SuperPI 32M passed, but just not in Prime95/SP2004GO. :(

btw, im thinking to order one unit of 2x1GB DDR500 TeamXtreem to try out :D
before i order, i wish someone can enlight me a bit.
thanks.

Just got my TeamXtreem DDR500 UCCC,
seem it cannot stable at 260MHz, 3-4-3/4-8, no matter 2.6v or 2.7v in SuperPI32M... :(

any help ?

BIOS using the latest one from DFI website.

Quote:

---

Originally Posted by ahpaul82

Just got my TeamXtreem DDR500 UCCC,
seem it cannot stable at 260MHz, 3-4-3/4-8, no matter 2.6v or 2.7v in SuperPI32M... :(

any help ?

BIOS using the latest one from DFI website.

---

Here...try these settings....good luck :toast:

http://img108.imageshack.us/img108/3...x25432m2zo.jpg

Quote:

---

Originally Posted by s7e9h3n

Here...try these settings....good luck :toast:

http://img108.imageshack.us/img108/3...x25432m2zo.jpg

---

Great ~
will try you setting later.
btw,
what is your setting for Drive Strength and Data Drive Strength ?

http://img217.imageshack.us/img217/9...setting0qu.png

here is my setting for 250MHz,3-4-3-8,1T,2.6v+0.3v enable.
Prime stable 19hours for this setting.
http://img365.imageshack.us/img365/7...2004go19ho.png
more than that, no go... :(

For your cpu - try 8/2 (DS/DDS) ;) Also, if your sticks can't run as tight as mine, just loosed the trp ->4 or trrd ->3......

Quote:

---

Originally Posted by s7e9h3n

For your cpu - try 8/2 (DS/DDS) ;) Also, if your sticks can't run as tight as mine, just loosed the trp ->4 or trrd ->3......

---

try your setting already,
still no go,
seems like i have one weaker stick than the other...
can RMA in this kind of condition ? :rolleyes:

what would yield better performance results, 2x1GB DDR500 2-3-2-5 or 2x1GB DDR550-600 3-4-4-8 timings?

I saw these sticks running at 300FSB in an earlier post at 3-4-4-8. Do the latest sticks from xtreem work this well?

Quote:

---

Originally Posted by s7e9h3n

For your cpu - try 8/2 (DS/DDS) ;) Also, if your sticks can't run as tight as mine, just loosed the trp ->4 or trrd ->3......

---

A weaker drive strength and a data drive strength doesn't lower the possible max frequency of the RAM?

I have this setting... and UCCC Xtreem 500 on AsRock DualSata2 - 939, and X2-3800@275MHz (cpu ok, ram im testing for stability rocksolid).
I have some stability problems with 1T setting (now it works 2T).
http://img432.imageshack.us/img432/1279/weakqo3.th.jpg