Mounting Hole Dimensions For CPUs and Video cards

Right now I’m working on the mounting hardware for my next system it will have two heads one for the CPU and one for the Video card. What I want to be able to do is hookup to just about anything. So I need mounting hole dimensions for video cards and CPUs also tolerances for junk around the socket would be helpful. I like detailed drawings so whatever you guys have or know where to get it.

So far the best information I’ve found is at Intel http://www.intel.com/design/Pentium4/documentation.htm and VR-Zone http://vr-zone.com.sg/?i=1356&s=1 wondering how accurate this information is also if anything is missing. One thing I found is that I have a Nvidia 5950u and a 6600 that I measured and there both 80mm so is 53.5x53.5 quite common? Stuff like that.


A64 - 88.9mm
LGA - 72x72mm
478 - 76.2x59.44mm
ATI - 55mm
Xeon - 38.1x81.28mm
Nvidia Geforce 4/FX - 80mm, 38x38mm
Nvidia 6600/6800 - 53.5x53.5mm

Intel stuff
http://img224.imageshack.us/img224/215/lga6nc.jpg

http://img224.imageshack.us/img224/5410/4784sb.jpg

AMD
http://www.amd.com/us-en/Processors/...9_7203,00.html
http://img208.imageshack.us/img208/4055/amd2sf.jpg

AMD Socket A "@itor"
http://img185.imageshack.us/img185/1...cketamd1ca.jpg

Xeon
http://img206.imageshack.us/img206/2746/xeon6zk.jpg

Sweet. I needed some measurements for when I mod some blocks. Thanks.

Does anybody have information on video cards? I think I have processors covered.

What about for xeon CPU and M2?

tnx

Added Xeon

x1800/1900 is 53mm x 53mm.

What about Yonah and M2?

tnx

Yohah/Meron is the same mounting holes as s478
and Conroe will use the same as the s775 socket

M2 socket (I think)
http://img321.imageshack.us/img321/6782/socket19ah.jpg

The keep-out area around the mounting holes looks the same shape as the pictures of the socket so it must be the m2. Good find.

This thread has been slow going, finally a few points useful information.

Who is already sure about AM2 socket holes ?? :)

Thanks
Peter

Got a mobo sitting here (customer going AM2 route).
Will measure to confirm but looks right on glance.

PS) YUP good find. That is AM2.

Here is universal mounting 939,775,478, AM2 :toast:

http://ld-phasechange.com/images/evaps/mounting/5.jpg

tnx

You rock littledevil :)

@little devil
can you give ur measurement in .jpg?
if u dont mind,may u incl the 462 socket..thx

Thanks, it was a big help for me!

does anyone know the dimensions for north bridge for 775 and 939?

Quote:

---

Originally Posted by LittleDevil

Here is universal mounting 939,775,478, AM2 :toast:

http://phasechange.extremecooling.ne...mounting/5.jpg

tnx

---

Wheres the pic' I need the universal layout :D



jonspd

BTW , GF 8800 series has 4 holes, 58.5 x 58.5 mm :)

Thanks for this thread, I'm sure it'll be useful :)

Regards

So does anyone have a pic of the universal mounting plate?

FOR CPU : http://www.syndrome-oc.net/articles.php?article=68 But I need to update with AM2 socket ;), it can be usefull!

Somebody have mounting hole dimensions for new nv and ati cards?

Quote:

---

Originally Posted by kayl

does anyone know the dimensions for north bridge for 775 and 939?

---

I don't think that is standardized sadly :confused:

Quote:

---

Originally Posted by [XC] gomeler

I don't think that is standardized sadly :confused:

---

Unfortunately yes. But for example those who have waterblocks can measure the distances between the holes and post here. Ek has a compatibily list for their NB/SB waterblocks and if you know the dimensions for one waterblock you can see on witch boards they fit. ;)

Anyone knows the mounting hole dimensions for new graphic cards (3870, 9800GTX and so on). They all have the same, without the GTX200 and G80..

Quote:

---

Originally Posted by todda7

Anyone knows the mounting hole dimensions for new graphic cards (3870, 9800GTX and so on). They all have the same, without the GTX200 and G80..

---

http://www.aqua-computer-berlin.de/B...n/twinplex.pdf

Thanks man :up:

where i can get the sizes for the 8800 GT and the P35 ??

I think we should add i7 here

LGA 1160 = 75 x 75 mm

LGA 1366 = 80 x 80 mm

I made simply guide few weeks ago but as I see nobody read sticky thread so:

http://www.xtremesystems.org/forums/...1&d=1226928874

That lga771 is not correct, only skulltrail uses same mountings than lga775s are.
I can measure later today the normal lga771 mountins :)

i think you're wrong
im pretty sure its the same thing as 775 as i've used pots on skulltrail before

Well i have one Supermicro X7DAL-E+ dual lga771 mobo here and i know than only skulltrail uses lga775 mounting holes :P
Earlier post was badly wrote :|

That is very good work Duniek :) :up:

Thread necro: what are the am3 holes?

thanks :)

same as am2 and am2+

anyone know lga1156 mounting holes?

Isn't it the same as 1160? (I thought it was).

Quote:

---

Originally Posted by [XC] gomeler

same as am2 and am2+

anyone know lga1156 mounting holes?

---

75mm IIRC

Is there a standard for nb holes?

Quote:

---

Originally Posted by Boogerlad

Is there a standard for nb holes?

---

no :(

at least ~ 6 months ago there wasn't. i can safely tell you there still isn't but.... don't want to spread wrong info as fact

Do all P45's have the same and all the X58's have the same? Or is almost every single board different (even if the chipset is the same).

anyone know what the maximum hole size is? m2? I know it' s m3 for cpu, but not sure for gpu.

Quote:

---

Originally Posted by Boogerlad

anyone know what the maximum hole size is? m2? I know it' s m3 for cpu, but not sure for gpu.

---

Usually M4 for cpu and M3 NB + ATI gpus, NVIDIA gpus use M2.5 which is sometimes pain in the ass when you try to find them :/

Holy thread bump! However this is one of the few most useful threads.

Anyone got a pic with all the current holes?

you have it in duniek's posts, but on it there no update for 5800 series (53,5x53,5)

Is lga1156 confirmable at 75mm square?
And am3 = am2?

yes

About GPUs - that's file from September 2010:


http://img607.imageshack.us/img607/7...leswrzesie.png

But

How about GTX580, and other newest GPUs ? Anybody knows ? :rolleyes:

Peter

580 is same as 480 and other nvidia cards from past

i still use old pots from KP and mounting fits

only other one that needs special mounting (my case only two screws is GTX460 LOL) and 560 might be the same way

Anybody know mounting hole dimensions for upcomming Socket LGA 2011 based on the Intel X79 ??

http://www.xtremesystems.org/forums/...d.php?t=271576

http://lab501.ro/wp-content/uploads/...9a-482x580.jpg

I guess it 's gonna be more than 80mm because of the sheer size of that thing. Though, when comparing the length of those x16 slots with the hole pattern it seems it's still 80mm.

//edit.

http://en.wikipedia.org/wiki/LGA_2011#cite_note-2

Quote:

---

This socket is expected to be released alongside Sandy Bridge-EX in Q3 2011, and will support 4 memory channels as well as 40× PCIe 3.0 lanes; the socket will measure 58.5mm x 51mm, and is backwards compatible with LGA 1366 cooling solutions.

---

sorry empty post - to remove

Any new mounting holes standart than those used in S775,S1156,S1366,AM3 ?? I'm making new batch of evaporator mountings so I need that info :)

Thank You very much !