Opteron 146 CACJE 0603 FPMW

Printable View

02-16-2006, 01:27 PM
Isi

Opteron 146 CACJE 0603 FPMW

I have received this new chip direct from AMD European Distribution Center in Schiphol-Rijk.

After some fast test, and with TCCD and not very tight timmings, the chip seems to have a future ;)

It reboot at 3.2 Ghz, like my 154, but it needs more volts.

Cooled by air.

http://img104.imageshack.us/img104/5...1ghz5oa.th.jpg

http://img104.imageshack.us/img104/2...sp8m5zr.th.jpg

Tomorrow, i´ll try to do it stable. I expect 3.1 Ghz with 1.55 V. Water Cooled.

2006 is going to be a good year for Opterons too!!!

I hope my team colleague Lord, get better results with DICE.
02-16-2006, 02:07 PM
SkyGod

I just got a 148 CACJE 0552 today from newegg. I got to 250*11 on defalt vcore with no problem, right now I'm hovering around 2.9 @ 1.45v in bios so far its priming. I've had the chip in for about an hour now and I've gotten pretty far with little tweaking. I'm on stock air right now (waiting on a storm). I guess my chip doesnt tell you much about 06 chips but we do have the same revision.
02-16-2006, 03:04 PM
Absolute_0

Quote:

Originally Posted by Isi

I have received this new chip direct from AMD European Distribution Center in Schiphol-Rijk.

I will do some test during the weekend, but has anybody some references for the chips of 2006?

0603...

I anxiously await the results

BTW this doesn't belong in Xtreme Overclocking, put it in AMD next time.
02-16-2006, 07:55 PM
G4h4o8s6T

I saw someone over at EOCF with 146 CACJE 0601GPAW.........2.85ghz 1.4v
02-16-2006, 08:57 PM
EnJoY

Quote:

Originally Posted by Isi

I have received this new chip direct from AMD European Distribution Center in Schiphol-Rijk.

I will do some test during the weekend, but has anybody some references for the chips of 2006?

Hopefully it will be like or better than it's week 0542 cousin.
02-18-2006, 03:59 AM
Isi

Some caps in first post.
02-18-2006, 10:29 AM
Absolute_0

Not as good as week 40 and 47 ><

Hope we get another round of good ones soon.
02-23-2006, 10:23 AM
MikalCarbine

Any further results with that stepping? I am getting an opteron soon and have the chance to get one of that stepping
02-24-2006, 12:10 PM
Isi

For the moment i haven´t done more test :?

Just to say i could do a SS at 3.190 mhz, and that controller CJ seems to be not so good as B2 with TCCD. It is difficult to do it stable over 3050 mhz.

Sorry I can´t say anything else.
02-24-2006, 12:15 PM
Absolute_0

Where is the sweet spot on it, out of curiousity? I mean the point on the voltage scaling curve where you can get the most Mhz with the least volts, like 2.9 with 1.42 volts or something.
02-27-2006, 11:35 PM
Hullz-Modz

Ok, got myself an Opteron 146 CACJE and wasnt hoping to achieve more than 2.7-2.8 outa this chip, from what i've seen posted here.

First attempt:

146 CACJE @ 2700.88 MHz / Air Cooled / Prime Stable
Mutliplier = x10
HTT = 270
Voltage @ 1.5 BIOS (Burning it in, might be possible to lower it)
CPU Temp = 31-33c IDLE
FSB = 270
RAM = 180

Update: Dropped CPU Voltage to 1.475 and upped HTT to 290

Currently running:

146 CACJE @ 2920.88 MHz / Air Cooled / Prime Stable
Mutliplier = x10
HTT = 290
Voltage @ 1.475 BIOS (Lowered from 1.5v)
CPU Temp = 33-34c IDLE / 40c Full Load
FSB = 292
RAM = 194

Seems like i have room to hit the magic 3ghz mark and possibly more :woot: Seems like 2006 is a good year ;)

P.S. New to the overclocking scene too, not bad for a first try eh? :)

http://i21.photobucket.com/albums/b2...146oc29ghz.jpg
02-27-2006, 11:43 PM
Revv23

is newegg shipping 06 cpu's yet?

i need a new cpu and a 146 doesnt look too shabby.
02-28-2006, 03:13 AM
ante_ante

Mine opty 146 ca2be0602gpkw does 3ghz at 1,485vcore superpi 32mb stable...
03-01-2006, 08:31 AM
dz`

just got one of these myself.

CACJE 0603FPMW
xxxxxxxxx0609

results later.
03-03-2006, 09:59 AM
hawtrawkr

i just ordered a 146 from newegg yesterday for overnight and got a cacje 0603 fpmw going to throw it in tonight and test it on air. if it does well ill throw it under the singlestage and see what it can do.
03-03-2006, 10:01 AM
Absolute_0

Single stage + CACJE = good luck going past 270 htt

New memory controllers all coldbug, CAB1E, CAB2E, CACJE, all coldbug too bad for single stage.
03-03-2006, 11:43 AM
hawtrawkr

Quote:

Originally Posted by Absolute_0

Single stage + CACJE = good luck going past 270 htt

New memory controllers all coldbug, CAB1E, CAB2E, CACJE, all coldbug too bad for single stage.

figured it would crap out early but only takes a minute to see how far it will go. have to do something while i wait for my new cpu to get here monday (just got the 146 as a crutch so i wouldnt be down over the weekend)
03-03-2006, 12:38 PM
Fixxxer

Quote:

Originally Posted by Absolute_0

Single stage + CACJE = good luck going past 270 htt

New memory controllers all coldbug, CAB1E, CAB2E, CACJE, all coldbug too bad for single stage.

Yes... all new controllers are crappy.
03-03-2006, 12:41 PM
Absolute_0

except LDBHE :)
03-03-2006, 02:36 PM
shimmishim

i wonder if there are 144 CACJE's yet.

My last CACJE 148 did 3.0 ghz with 1.52 volts prime stable.

but it died in an unfortunate accident... let's see if these 060X's live up to their hype!
03-03-2006, 02:39 PM
Absolute_0

I'd still take a CAB2E over a CACJE, all other things equal.
03-07-2006, 05:47 AM
vanquish

Just received my CACJE 0603 FPMW...

Lemme get back home and see what I can do to this beast ;)
03-07-2006, 06:13 AM
SIOUX

Welcome to the forums vanquish:toast: you live in the most beutifull place in the world. been there 3 times living in Anjuna,Vagator and Arambol :)

Sorry for OT :)
03-07-2006, 06:14 AM
Revv23

my 0603 CACJE does 3.0ghz stock volts easy so far, more coming end of the week.
03-07-2006, 06:27 AM
GoThr3k

be sure to post when coldbug kicks in hard
03-07-2006, 10:21 PM
shimmishim

lol.

well i got a 144 CACJE 0604APMW

seems like a dud overclocker.

2.7 (9x300) @ 1.55 prime stable.

.sigh. 1 week difference... such varying overclockability
03-08-2006, 04:30 AM
bito

I picked up a CACJE 0604CPAW 146.....running 3.0GHZ for 20+ hrs prime so far at 1.53v on DFI Expert and Big Typhoon cooler.
03-08-2006, 04:32 AM
cupra

nice work and very nice chip, its look like the 06XX chip are great :toast:
03-08-2006, 11:23 AM
shuRe

Quote:

Originally Posted by Fixxxer

Yes... all new controllers are crappy.

i disagree, if your looking for air/water (a large majority), the coldbugged mem controllers work very well.
03-08-2006, 03:56 PM
Bob21

I just got a CACJE 0603 from AMD on an RMA, not as good as my CAB2E 0540.
One thing I noticed about the CACJE chips (I've had a 0545 before too) is that they lock up when they are not stable, the CAB2E would just give an error or restart.

CACJE also cold bugged at about 10C which is worse than the CAB2E
03-11-2006, 01:33 PM
dz`

I've read that people are saying that the IHS contact is good on 06 chips. Disregarding that, I popped the top of my CACJE 0603FPMW, cleaned the paste up, applied AS5 and glued her back on. I'd say it was worth it so far.

Temps:
http://img146.imageshack.us/img146/2...compare6dv.png

VCore:
http://img146.imageshack.us/img146/1...compare5ip.png

Don't quite understand why my VCore is fluctuating now though :stick:
03-13-2006, 12:41 AM
vanquish

Hmm this is what I did with the 146..:)

http://img67.imageshack.us/img67/1886/3g1rs.th.jpg

Its on a crappy A8V Deluxe (sigh, I need a new board) with 300HTT limit so its maxed out.

And temps aren't too high as its on stock cooler (not assembled WC kit yet) and Goa is pretty Hot these days :cool:
03-13-2006, 01:17 AM
Spyrus

CACJE 0601GPAW also here.
Tested with stock air @ 2.75GHz / 1.41V.
It is running too hot there 55 C ~full load.
So IHS is bad & Opteron too are hot.
I cannot test any further.
http://img474.imageshack.us/my.php?image=10x2759qq.jpg
03-13-2006, 02:44 AM
v0dka

Quote:

Originally Posted by vanquish

Hmm this is what I did with the 146..:)

http://img67.imageshack.us/img67/1886/3g1rs.th.jpg

Its on a crappy A8V Deluxe (sigh, I need a new board) with 300HTT limit so its maxed out.

And temps aren't too high as its on stock cooler (not assembled WC kit yet) and Goa is pretty Hot these days :cool:

How stable is this?
03-13-2006, 05:24 AM
vanquish

^^ Very unstable :( , gets too hot down here, room temps are 34C

Quote:

Originally Posted by Spyrus

Tested with stock air @ 2.75GHz / 1.41V.
It is running too hot there 55 C ~full load.
So IHS is bad & Opteron too are hot.

Seems like that... Its getting too, too bloody hot. Really need to get myself a WC kit soon...:|
03-13-2006, 05:40 AM
Revv23

mine is running 3.15 ghz with 1.6v at 35c load.

i think ihs removal would be nice as im getting a 15c delta between idle and load.

but im not doing that until im done playing with BH-5 :)
03-13-2006, 12:14 PM
Isi

Some test with BH5.

SP8M 3.080 Mhz

http://img342.imageshack.us/img342/7...30653rr.th.jpg

SP1M 3.118 Mhz

http://img416.imageshack.us/img416/5...zbh50tl.th.jpg

SP8M 3.0Ghz 1.5V

http://img466.imageshack.us/img466/3...30008zd.th.jpg

Water cooled. DICE session was a waste of time.
03-14-2006, 12:11 AM
vanquish

Quote:

Originally Posted by Revv23

mine is running 3.15 ghz with 1.6v at 35c load.

^^ Stable ?? Water/Air, with/without IHS ??
03-14-2006, 05:21 PM
Revv23

was stable on air... with ihs.

cpu is gone now. :(
03-26-2006, 11:38 PM
MaxxxRacer

My 0603 CAJE is doing great on the mem controller side. Does 300mhz no problem and I got it to my TCCD's max of 307mhz.

http://www.xtremesystems.org/forums/...ad.php?t=93993
04-13-2006, 06:10 PM
petercintn

I picked up a 146 CACJE 0603FPMW the first of March. It will do Super pi @ 3.1g but I don't take super pi as stable.

I have it prime95 stable for 8 hrs @ 2.97g with the 180 divider on a Ultra-d

I have had it @ 3.05g but I don't like my temps @ that setting and I didn't complete the prime, but I think (big if) it would have completed 8 hrs. It got up to 51c with 1.584v and that's a little hot for me.
But at 1.44v I'm sitting @ 30c right now.

I run it @ 2.88g @ 1.44v - prime95 stable for 8 hrs.

Here's the entries @ DFI Street in the OC Database where you must at least post with this and a few more benches to prove your stable.

2.97

http://www.dfi-street.com/forum/show...&postcount=170

2.88

http://www.dfi-street.com/forum/show...&postcount=174
04-15-2006, 11:21 PM
zungkono

Any result from 144 CACJE 0606 ? Does anyone have it ?
04-18-2006, 08:14 PM
vanquish

Bumping up this old thread...

Very early results, didn't really get much time to work on the RAM's and all...

http://s2.supload.com/thumbs/default/3G.jpg

http://s2.supload.com/thumbs/default...0407104505.jpg
04-20-2006, 06:39 AM
vanquish

Hmm... nobody :P
04-25-2006, 05:30 AM
God_Lx

Couldn't open the pics, i got a 148 CACJE 0544 EPAW yesterday, and my biggest problem is that the CPU it's WAAAAAAAAYYYYYYY HOT ! I have a XP90c + VanTec Tornado 92mm, and @ 1.36v in CPU-Z it goes to 43º in full load...

Does 2906Mhz @ 1.36v (Default is 1.4) and 3050Mhz @ 1.475... My biggest problem is the temps...
04-25-2006, 07:00 AM
kingdomwinds

you are complaining about those temps? My dud 148 max temp is 56c in prime95 2.75ghz @ 1.5v. Still ran blend and Large TFFT for 11 hours till i stopped it.
04-25-2006, 08:57 AM
Isi

Quote:

Originally Posted by God_Lx

Couldn't open the pics, i got a 148 CACJE 0544 EPAW yesterday, and my biggest problem is that the CPU it's WAAAAAAAAYYYYYYY HOT ! I have a XP90c + VanTec Tornado 92mm, and @ 1.36v in CPU-Z it goes to 43º in full load...

Does 2906Mhz @ 1.36v (Default is 1.4) and 3050Mhz @ 1.475... My biggest problem is the temps...

What chip did you have before? A +3000 Venice??

Those temps are excellent for an air cooled opteron.
04-26-2006, 03:28 AM
Unseen

Just got mine... I will put it to my dfi .
I have a ss in a case with small compressor (1/6).... I will post later...

CACJE 0603FPMW
03-13-2007, 12:55 AM
m_enanos

hi, i have the oportunity to buy a cheap opteron150 with this step:
OSA150DAA5BN
CACJE 0603CPMW

I want to know if it will overclock as good as my opty146 cabye 540 (it do 3ghz with 1.5v)

I need your help!! :D

very thanks
03-13-2007, 01:47 AM
Lastviking

Quote:

Originally Posted by m_enanos

hi, i have the oportunity to buy a cheap opteron150 with this step:
OSA150DAA5BN
CACJE 0603CPMW

I want to know if it will overclock as good as my opty146 cabye 540 (it do 3ghz with 1.5v)

I need your help!! :D

very thanks

I think soo try it :)
03-13-2007, 08:27 AM
|3ourne

http://upload.overclock3d.net/get.php?id=2092&view=1

thats what my CABNE 0530 APMW does on air ( bit high voltages coz I was looking for a quick stable shot but actually its stable at 1.525V bios ) . For sale btw , and NO COLD BUG !!!! ( FX 57 core ) .

All times are GMT -8. The time now is 10:08 PM.

XtremeSystems