Printable View
:D
This story is begining, i don't know what will be the end.
Preface :
165 Waterchilled 3.1Ghz
1900XTX Stock cooling/stock frequency
XP, no tweak, just performance mode in CCC.
http://pageperso.aol.fr/misteroadster/190041K2.JPG
Bests Stockcooled finals results :
http://pageperso.aol.fr/misteroadster/7k.JPG
http://pageperso.aol.fr/misteroadster/14K.JPG
http://pageperso.aol.fr/misteroadster/22k3.JPG
http://pageperso.aol.fr/misteroadster/45K5.JPG
Here we go
single card?
yes probably :d
very nice score, wow 41k
mister go for the 51k :D
ouch i need some hardware for 51K :D
go for 51k mister :toast:
FX57...
Working...
Still XTX stock cooling, Gpu not maxxed.
XP untweaked.
Ambiant temp 25°
http://pageperso.aol.fr/misteroadster/43K3.JPG
I'm assuming the lines on the picture is windows throwing up ?? :confused:
That opty is holding you back :( ... though I imagine some 3d05 and 06 results would do you some good ;)
Perkam
Thats a very high memory OC. Up that mem voltage :stick: :stick:
lol nice artifacts man i love benching on the edge like that lol
sounds like your all outa cpu power tho fx60 would do some good i think
ouch that's artifacting bad in that screenie!Quote:
Originally Posted by misteroadster
hey..... at least the card didn't lock up. Push it till it bleeds.
Wow the memory overclocks like mad on these X1900's.
not always rising vddq will make it more stable. Remember eva2000, he undervolts mem voltage (from stock voltage) to get higher clocks!Quote:
Thats a very high memory OC. Up that mem voltage
Update :
http://pageperso.aol.fr/misteroadster/44k7.JPG
tonight 45K :rolleyes:
yeah my friend FX60 help to do it!
Good O/c my friend :D
where are the artefacts ? :D
go for the quadrifecta mister :toast: :p
et Hop !! :D
http://pageperso.aol.fr/misteroadster/45K5.JPG
Nice number :toast:
where are the artefacts? j/k
artefacts are at 963 :rolleyes: :toast:
avec un dothan @ 3.8-4ghz tu briserais le 50k :D
en air ? :p: hummmm... maybe. :D
Can you show the details for the 45.5 k run Misteroadster??:) nice work at those cpu clocks. guess DC give a little extra in 3d01 as well.)
Core oc is too low...
Perkam
Of course ;)Quote:
Originally Posted by SIOUX
http://pageperso.aol.fr/misteroadster/detail45k5.JPG
Thats a very good nature for those card clocks:) i need 760/990 for that score.
And also very nice Car low and high with 3360mhz:)
very nice work....and on winxp.
yes and with bastard drivers :) they work really bad on 2K.
i will say that u have a good CL for that Cpu freq :D ; nature get's no very much improvement by +32 pipes - still dependent on rams freq .
always a good job misteroadster ;)
oh, :) you made me think to change my sign , and thanks too :toast:
hehe misteroadster there is a saying here in Ro : u can forgive but u cannot forget ;) . #1 is rather easy to get then to keep . More important is to have good results all the time . And u had good&very good results : congrats:toast:
Very nice clocks. Seeing things like this makes me sad for selling my PC and getting out of the overclocking scene. Keep up the good work. I am subscribing to this thread to see what happens next...
Can you run some 3D05 Benchmarks next as well?
i love your work.....artifacts and all lol :toast:
crank some LOD and filter optimisations as well dude and squeeze it more.....46K coming up :D.....who knows maybe even 47K :)
english only !Quote:
Originally Posted by Supertim0r
mais bon ca mgene pas.
Supertimore est encore plus fort, avec ca nouvelle formule... :toast:
lol :p
mister go for a 2k 8.1
that rox
Yes, i will try some other 3DM later, but 03,05,06 are less funny than 2001.Quote:
Originally Posted by ugp
:toast:
CCC don't work on 2k :(Quote:
Originally Posted by skirms_fr
I already used lod , but just tried 3, i have to test more :)Quote:
Originally Posted by dinos22
Here you go...run 3DMark99 and 3DMark2000! LoL...See what scores you can crank from that. Those are more funny.
Thats strange, mine works fine in 2k (not using X1900 though but X1800XT cat 5.13 + CCC + 2k, dont know if the CCC actually changes as the cat's do....).Quote:
Originally Posted by misteroadster
Bravo!!!:)
probably a problem with framework ...Quote:
Originally Posted by loc.o
GG Mister :slap:
7k Stockcooled done :)
http://pageperso.aol.fr/misteroadster/7k.JPG
Nice :slobber:
Now go to sleep :stick:
Nice work there...awesome 06 run:toast: and first time i see an x1900xtx actely show up in 3dmark as X1900XTX. i have only seen it show up as x900 series before. What brand XTX is it ???:)
Sapphire :)
WoW! drools at scores
takes out CC, looks at it!!! cues up Newegg........ drum roll............ lol!
CCC works on win2k. Actualy works on win2k sp3 as i installed all my drivers before i updated windows this time around. only thing that didnt install was gameshadow, CCC did need a reasonably large download(cant say for sure but im guess'n 10~15megs from how long it took) that it grabbed mid install.Quote:
Originally Posted by misteroadster
frenchy corner here :D
goog job Mr :clap:
Very nice results :toast: Congradulations
Net framework 1.1/service pack 4 for windows 2k and CCC to work :)
Awesome results here Mister :clap:
Working on 14K still stockcooled but now it's time to sleep.
Maybe tommorrow :)
FX60 3300Mhz
X1900XTX 732/963
http://pageperso.aol.fr/misteroadster/13k9.JPG
About 0.3 fps in the whole test missing :D
Is that the same FX60 as the one we spoke about on OCM?Quote:
Originally Posted by misteroadster
Quote:
Originally Posted by chew*
SP3 :D works also !
yes, it's this one.Quote:
Originally Posted by before
14K stockcooled done :woot:
http://pageperso.aol.fr/misteroadster/14K.JPG
how did you get rid of the artifacts @ 963 with same voltages as beforeQuote:
Originally Posted by misteroadster
and still using the stockcooler? hooked some massive deltafans for fire
support of the stock fan/heatsink combo?
anyway, kudos on 14k!
:woot: :woot:Quote:
Originally Posted by misteroadster
Nicely done, and still with resonable clocks on the FX60, time for some 3D06 action ?
Yes, you have to install dotnetfx.exe before CCC works !!Quote:
Originally Posted by chew*
Anyway nice clock Misteroadster :toast:
Quote:
Originally Posted by Tyrou
he did , on page 2 :D
http://pageperso.aol.fr/misteroadster/7k.JPG
I opened the windows to have more cold , i was at 8° ambiant :rolleyes:Quote:
Originally Posted by sky
Very well done mate! :clap:Quote:
Originally Posted by misteroadster
Still testing :
Difference here is i used Atitool to oc the card.
Same clocks on the Gpu as before.
DDR3 clocks are inferiors (904 instead of 963mhz with overclocker) but score is better.
http://service.futuremark.com/compare?3dm06=120395
tighter memory timings maybe? that would also explain why you can't reach
the same memory clocks - with the window(s) open again for that extra cold
i presume, eh?
any update ? :D
Yes :D
New scores fully Waterchilled.
Now i used any gigabyte K8NF9 Vio=vddr modded because my Dfi is dying (P4 connector burned :D)
It do the job don't you know ?
What about my Vga ram frequency ?
http://pageperso.aol.fr/misteroadster/15K2005.JPG
http://service.futuremark.com/compare?3dm05=1822439
:slobber: Benching at 2ghz+ Mem !!! :slobber:
EDIT: Originally thought you got that score at stock clocks lol...
Perkam
:toast:
My new 2006 score :
http://service.futuremark.com/compare?3dm06=142982
Hmm...i dunno Mr. Roadster, I'd rather you benched 01 with a single core proccy at insane speeds. :)
The gpu core and dual core cpu speed are too limited for this setup to make use of your skillz :)
Perkam
lol, i hope some cpu power soon to hunt the 50K.
for the moment the only thing i want is : to keep my XTX safe and enjoy a lot for my money :D
Time will tell ... :)
I just love it
congrats on getting to 14k with air cooling. this is my current goal. every day I bench I make progress though, im still on stock cooler I think when i can get some copper ram sinks and a vf900 I should be able too. this is the best Ive been able to do so far with stock cooler:
http://img69.imageshack.us/img69/9953/139034ya.jpg
772 mhz Gpu is really good for stock cooling :)
Just as Beautiful :toast:Quote:
Originally Posted by misteroadster
misteroadster it's me or that graphic card is deformed? :stick: (maybe it's de view)
it's not you :D
Thanks, I need to figure out some thing though to get my mem higher . 900 is full of artifacts and as high as I've been able to take it, 910 froze within 2 seconds and filled with artifacts like crazy. although I havent messed a lot with voltage besides the core. what are you guys using for mem volts to get near 1000mhz? or past 900 I should say. I just increased about .10-.20v on all 3 mem volt settings to get to 900.Quote:
Originally Posted by misteroadster
Im not sure if thats the best thing for it though, I got my highest (Score:Mhz) when I left all the mem volts alone, just upped the vcore to 1.5 13834 @750/850, but when I increased mem volts and ran a different day @ 775/900 my score went down to 13200? very confusing, im still trying to figure out ideal voltage any way. the core/mem Mhz are definitly not the only factor in 3dmark.
ps are you guys using win2k?
Nice work MR! :toast:
thanks Master ;) :toast:
I will be getting a HIS x1900XTX...how do those fair up for overclocking does anyone know?
Also what voltages on the core and memory are you using and at what clocks?
Thanks.
Very Nice My friend :)
I run for 24/7 settings 1.4v to core, stock mem volts @ 710/810Quote:
Originally Posted by ugp
As I told you on MSN, I can send you my cpu in order to let you win some points If you can :D
(opteron 148 3.1 ghz stable @ 1.47v on watercooling) maybe will you hit 3.4 ghz-3.5 ghz 3d benchable ;) cabye not coldbugged. (0528 gpmw)
He already has an FX60@ 3.3+ :confused:Quote:
Originally Posted by eviLRuLeZ
What are your temps by chance? Also did you happen to remove the stock heatsink and put some different thermal paste on it as well?Quote:
Originally Posted by Daveb2012
great work my friend :toast:Quote:
Originally Posted by misteroadster
ps: my dfi is dying too :D :p
Very very beautiful :toast:Quote:
Originally Posted by misteroadster
...except the dust on the right side :D ;)