Printable View
Intel 955XE ES 12x400FSB 1:1 3-2-2-4 (2 write recovery)
Asus 975X P5WD2-E Premium
Corsair 8000UL @ 2.4v
Validation:
http://valid.x86-secret.com/show_oc?id=62931
:toast:
http://www.xtremesystems.org/forums/...1&d=1136945544
http://www.xtremesystems.org/forums/...1&d=1136946770
Very nice :D
congrats FUGGER :woot:
DDR2:stick: ;)
Very nice Fugger! The new mobo is much better! Now all you need to do is get the new gas in the cascade and then everyone look out:)
Hopefully the prog I just sent him will give us a better idea of what 400 1:1 really means....lol.....
Uh?Quote:
Originally Posted by Jeager
Not even 300 2-2-2-5 will keep up :D
Nice fugger, keep it up :banana:
uuh, i don't geddit. i have like 33ns at 258 2-2-2-5.Quote:
Originally Posted by Shinuza
so i may have a lower bandwidth but the access time should still be faster, right?
It may work like this :confused:Quote:
Originally Posted by Der_KHAN
Don't forget A64 has integrated memory controllerQuote:
Originally Posted by Der_KHAN
good point. so what is the latency of ~250mhz 2-2-2-5 like on the 975X chipset?
A lot.
I forgot that point :slap:Quote:
Originally Posted by kiwi
So it's a RAM speed record or an intel record or an fsb record? I'm not sure what the category would be, because:
400htt numero uno
and
400fsb numero dos
were both by sept 22, 2005. Not trying to knock the wind out of anyone's sails.
Nice FUGGER :)
When are you up for 500mhz 1:1 :p:
Disaggree...Quote:
Originally Posted by Shinuza
2-2-2-5 rocks at 27x-300mhz :S - 2x 512MB ofcause.. (eventhough its 8GB/s, it still owns :))
xtreme! :toast:
I aint a native in the Intel platform :stick: , but all I can see the new 975 chipset performing veeery well :fact:
and those ddr2 Corsairs rock on Intel too!
would like some benchies (personally I would really like if you could do a run of pcmark 2002 , yes the old one, cut its pretty on timings :cool: )
damn! nice job fugger!
all i've seen is good from the 8000UL's... maybe i oughta replace my OCZ with a set of these suckers **rubs hands together**
Gj fugger :toast:
:eek: You think 2-2-2-5 is that powerfull? :confused:Quote:
Originally Posted by M.Beier
BTW if we speak on a 24/7 rig this one will win for sure ;)
Awesome job, nice to see our memory doing so well! Good work!
I'd say 2x512 ddr2@400 3-2-2-4 >> 2x256 bh5@300 2-2-2-5....
Mr Tinker I am 1:1. The links you provided I am sure are at some other memory ratio where the memory is 300Mhz or less.
450FSB is the current WR for Intel
congrats mr. fugger :P:banana:
congrats Sir FUGGER :toast:
Nice it seems like the i975x might be worth upgrading to for the overclock potential also.
ooooooo, Very nice, Congrats Fugger:)
Disagree :)Quote:
Originally Posted by Shinuza
cant remember weather its 32 og 36ns I get on my 24/7 settings :S
But my BW is more like 7700MB/s for 24/7 @ SiS, which aint that much.
PM me if you want more info, cause this aint about that, Fugger got a nice result, A64 (DDR1) vs. Intel (DDR2) aint what this thread is about :) *and I dont fancy making FUGGER an enemy :nono: *
wow FUGGER :toast:
that is totly xtreme, 400mhz at 3-2-2-3:slobber:
Very impressive :toast:
So let's see a Lobby hi at 16x400 eh? :D
Taking well to Canada, eh? :DQuote:
Originally Posted by macci
Anyway, FUGGER, what exactly is the 450MHz WR for? 4-3-2? 1:1?
Tonight I will run some 3D but I wont be able to run 16x, more like 14x on vapo.
I am still finding the top end of this board and I need the NB voltage mod. My board is a bit weak at 1.59v and I need more like 1.7v
I tried memtest 86+ and it does not show speed or timing and a bit bugged on reporting bandwidth too.
Is CPU clocking better on p5wd2 or p5wd2-e? is the gigabyte 975x comparable
any other memory related benches of that "THING"? (sisoft, everest, etc)
btw, what program do u use to adjust the timings of the mem (Asus P5WD2 mobo) within windows?
Cheers
what voltage trough the memory
very nice result though
first post,
Corsair 8000UL @ 2.4v
Impressive! Good job, Fugger! :clap: :banana:
sorry, missed that :slap:Quote:
Originally Posted by Byron
Amazing result fugger:)
The 955X board was a better overclocker with the volt mods, next break down I will mod this mobo.
I was playing with clocks last night and with stock mobo it doesnt want to boot past 5.3Ghz into windows.
I am picking up a Gigabyte G1 board to test as well.
test Fatha, till the electrons melt down http://img293.echo.cx/img293/4732/ch...scom8921zb.png
wow 2.4v.. impressive.
I cant wait to see ddr1 voltages flowing through ddr2 sticks :DQuote:
Originally Posted by Revv23
What's superpi 1M saying?:D
Awesome work fugger, I would also like to see sandras band tests as well :)
is that just an amazing set of ram or does the i975x help?
Work units / day can it do for Rosetta :hrhr:
Another wonderful job by da BOSS! :up: :toast:
Mad Mikee, thats EXACTLY what I was gonna ask, lol. Looks like some good ram there fugger. That, paired up with a 670 @ 7.2ghz (18x400) 3-2-2-3 could be a pretty good match up.
Testing the Gigabyte G1-975X atm, I have another P5N32 to test right behind it.
Just in the middle of some quick LN2 670 runs on the Gigabyte - board is messy for low lat mem timings - Asus will be the much better option for xtreme stuff it appears on first glance.
wonderful! :thumbsup:
isnt it a bit inaccurate comparing ddr2 versus ddr because intel runs it at 2T ? Or is this false information?
Anyways fastest memory around atm :toast: keep em coming boss
Hi!Quote:
Originally Posted by FUGGER
Do you think the P5WD2-E, 955XE, Corsair8000UL and Vapo LS is now a bad combi??
Because i´m reading there is maybe a sub-zero problem, or everything is ok??
Best regards and congrats for your work
Perfect !!!:thumbsup: :thumbsup: :thumbsup: :thumbsup: :thumbsup:
Booted into windows at 14x 386FSB w/ 2GB Corsair 8000UL 3-2-2-4 1:1
http://www.xtremesystems.org/forums/...1&d=1137323552
Sandra cache & bandwidth
Link to AM3 score below.
Update: 392FSB 1:1 3-2-2-4
http://www.xtremesystems.org/forums/...1&d=1137330812
Hi,
my P5WD2-E Premium arrived today, but overclocking is bad!
Max. FSB is 292Mhz x 12! (my P5WD2 Prem. 380Mhz x 12!!!!)
which Bios do you use?
now that is some SERIOUS bandwidth http://img252.echo.cx/img252/4391/msmiley18xh.gif
Serious ?
Fugger why it`s only 5000 MB/s ? IMO pretty low, ain`t it ?
And does Intel benefit from low latency ? Or it`s better to loosen it for more speed ?
Anyway Fugger congrats on achievin so nice clocks with so low latency :up:
Keep it coming :)
Unbuffered score on 975x
955x at 404FSB
http://www.xtremesystems.org/forums/...ad.php?t=68511
I have new memory from Muskin today, running LL 400FSB now with 1GB modules.
Now that`s totaly different thing :clap:Quote:
Originally Posted by FUGGER