Printable View
cooled with alphacool watercooling system (trippel radi....)
50°C idle temp , but radiator was outside my window (ambient temp. 2-3°C):
http://img487.imageshack.us/img487/9434/max32004rw.jpg
system was only windowsstable!!
looking forward @ opteron @ 3000mhz ;)
1.9V?
And hot?
You really kidinn' us?
Damned.
BTW Welcome to XS!
(sry my english is very bad , i am german!!)
no it isn a joke :D
my german friend (aka .blaze.) oced his opteron 148 on 3800mhz :
http://img530.imageshack.us/img530/6014/extreme3bw.jpg
also cooled with watercooling system (radiator outside window !!)
only windowsstable!
edit: it was the 31.12 when he tried this ! he was very drunk^^ ;)
Haha you Germans are funny. 2.28V through a 90nm CPU!
How did you do that? Vcore mod?
You just made a new XS Category! Xtreme Overvolting!!! :D
yes this forum need a category with Xtreme Overvolting!Quote:
Originally Posted by 5days
its real ...2V on 90nm cpus ;)
we used a DFi Nf4 Board ;) with some special bios u can use a bug ;)
when u adjust in bios 1,55V core + 123% u getting also 2V or more ;) everytime ^^ all the same on 1,00 v ore 1,45 volt ... everytime 2V or more^^
for some cpus its deadly but on our cpus it works^^ on 1,8V or 2,0V^^
MY ENGLISH IS SO BAD!!!!!!!!!!!!!!!^^ sry 4 this!
Yeah, it's working. But for how long?:D
i think 10minutes ?
lol You guys must be using an Expert.
ihr habt echt nen schuss ^^ :-/
These guys are nuts.... xD but hmm something doesnt fit .. the temp is too high ..
Higher vcore not always helps but 3.8Ghz 2.2V is insane :D
you are crazy :eek:
You want to kill it
Christ you guys are nuts. this cpu WILL die within a week.
you got some guts :toast:
on phase it would be really crazy .. but on water .. its just punishment for the cpu ^^Quote:
Originally Posted by kiwi
Just one word: why :D
Are you guys nuts? :p:
validation link?
i dont believe, that there is one ...Quote:
Originally Posted by leviathan18
3.8 on water? omfg lol.. 2.288v, insane man, you're some crazy people..
we are germans ;)Quote:
Originally Posted by lawrywild
echt echt?
Wat is er te echt? Twijfel eraan of die 3.8 @ 2.2V echt is :)Quote:
Originally Posted by phelonius
Crazy, is this real?
sorry no dutch here :shrug:
thats what the translator said to me:stick:
Quote:
What is there too real? Doubt to it or that 3.8 @ 2.2V marriage is
lol, that's weird! :eek:
Yeah really, where is it?Quote:
Originally Posted by leviathan18
I can't believe it, only that screen will not change my mind... Over 40º of delta @idle ?? :nono: The venice screen is possible, 3,2ghz@watercooling is possible, not @50º idling tho... That should be around 70-80º @full load... Anymore ? It's fun BTw....
I think he is trying to say that "Where does it say that its real? (ie. not fake) I doubt they got 3.8GHz @ 2.3V".Quote:
Originally Posted by phelonius
aaaah!
no, i dont think its real either
thats why i asked "echt echt" --> really real
hey guys my opteron is still arrived :
http://img464.imageshack.us/img464/7...hzready4ab.jpg
lol 2.2v on water... :S its posibble?
I meant: "Doubt the 3.8 @ 2.2 is real :)Quote:
Originally Posted by phelonius
very nice overclock - that's how the germans celebrate new year :toast:
what about the Opteron? do you have any new results?
Quote:
Originally Posted by mastachecka
yes 3200mhz working with 1,55V but my memory is to slow..need better ram ;)
sweet jesus thats a high clock on a 3200 venice!:eek:Quote:
Originally Posted by s7e9h3n
@s7e9h3n: very nice clock for a 3200+ :clap: how did you cool that thing @ 1,9V?
@r00t: very nice so far! give a little more vcore.
[german] und pack den Raddi wieder vors Fenster :D [/german]
Autocascade ;) :Quote:
Originally Posted by mastachecka
http://img223.imageshack.us/img223/3793/3600a1te.jpg
r00t
If you can somehow validate or repeat Opteron @ 3.8 GHz on water, it must be some kind of world record.
I think you are lying because this is by far the highest vcore I've seen on a 90nm AMD chip
According to the cpu wattage calculator, that 148 would output 390watts at full load.. Now we know why it would never be possible.. lol.
yeah, that's quite heavy. But couldn't it be possible because the water was chilled? And the temps aren´t too good, so...
Come on...
3,8GHz @ 2,2V on WC is impossible IMHO :eek:
the 3.8ghz screen is impossible :D
do you know how to make a validation r00t?
Quote:
Originally Posted by kappa2001
hi,
i think this thread is dead , my 3200+ ,too ;)
nice results :D
hehe, i primed a 3000+ venice @ 3,46 ghz @ 1,9v for 2 hours :P
Gehts noch?
Vali?
What do you think about this? I would never kill my CPU in this way! But try to post a Validation!
I dont believe a :banana::banana::banana::banana::banana: of this. No validations, and when some people ask for it, the venice dies LOL.
Then give us some validations of the opterons at high voltage.
@ Xtasy
I thought that your result was a validation wasn´t it ?
Do you have one prime screen of that result ?
@ r00t
Nice joke...give it up ! Never will get more than 2 volts on an 90 nm cpu...
@ stunned, it is definetly possible, I meen a Ultra-D can volt up to what? 2.4? 2.3?
he would be crazy to do that, but then again he lives in bavaria, so if he has the radi outside the window and its bloody cold, then it could be possible, however I do doubt it as well...
i think Xtasy said the truth guys ;) :fact:
http://img201.imageshack.us/img201/8...me34ghzhn4.jpg
r00t, according to your voltage:
I simply can't belive that without a validation link. Though it was very cold on my balcone here in bavaria I've had my San Diego 4000+ with 1.675 vCore on water and it had something like 55°C.
Thats nuts, even under LN2 I'd have serious doubts...
guys, for all its worth, he never gave the temp reading for the 2.2v chip, 50c was for his venice...