-
Super UCCC 1GBX2 G.Skill 2GBHZ DDR600 32M Done
-
holy :banana::banana::banana::banana:..
nice clocks :D
-
:slobber: :slobber: :slobber:
Very nice and that with just 2.64V :clap: :clap:
-
sweet results, but im going to have to ask...
are they game / 3d stable at these speeds?
-
:clap: beautiful.
with superpi32m stable , most likely it will be stable enuff for 3dmark runs.
-
AndreYang, you always seems to have the sweetest sticks around. Amazing! Gah! Please tell me these were not just a random set purchased from $200 from NewEgg and I'll back away from the ledge.
Quote:
Originally Posted by shuRe
are they game / 3d stable at these speeds?
I've only heard reports about the Infineon and Microns. Nothing about the UCCC, but maybe I haven't been paying attention. I agree with mdzcpa, that a little extra tweaking might resolve most of what has been reported on the Infineons.
-
Wow! wish mine would do that.
-
-
Awesome UCCC and First Class OC'ing, Andre :up:
@gundamit,
That's what I thought about Infineons and 3D back when OCZ came out with their EB PC4000 Platinum and we first started seeing this... Well, three 2GB kits later and hours of tweaking and I'm not still yet to see those sets clocking in 3D as far as 3D ;)
@shuRe,
I'm pretty sure he can bench those @ 300MHz in 3D as well. I can do 32M, 3D and everything else with UCCC I got here @ 291Mhz. Now seeing Andre, I might try harder :D
-
-
are these the same ones that are selling for 200 dollars at newegg????
http://www.newegg.com/product/Produc...4000USU2-2GBHZ
well they're out of stock but...are they? are they now?
what are these hittin on average??
-
Quote:
Originally Posted by chinkgai
the average is 275 ~ 285. I think if u'd get three pairs u will most likely find a combo that can pull this overclocking performance (three pairs, right :rolleyes: ). Great stuff.
-
Weird how the 'G skill' name is not shiny on those heat spreaders. All the ones that I have seen from the egg have shiny logo's, not grey like that:confused:
Though the Egg does show them in stock again, new batch maybe;)
-
@Andre
Very Nice ;) !
what bios ? drive strenghts ?
-
Quote:
Originally Posted by Major
@Andre
Very Nice ;) !
what bios ? drive strenghts ?
510-1 , Level 7/3
DFI NF4 Ultra-D
-
Nice work Andre. You using that awesome modded board? What the RAM do on a "regular" board?
-
Quote:
Originally Posted by Eldonko
Nice work Andre. You using that awesome modded board? What the RAM do on a "regular" board?
New Ultra-D AD0
-
-
Quote:
Originally Posted by AndreYang
New Ultra-D AD0
Good stuff, you the first to break DDR600 with something other than Ballistix. :toast:
-
That is just amazing. Didn't knew UCCC can do DDR600 too, until now :D
Congrats with your new WR.
This is really rare, i think 1 of the 20 kits will do this.
-
Quote:
Originally Posted by kakaroto
This is really rare, i think 1 of the 20 kits will do this.
I think it's more like 1 out of the total amount produced to date ;)
-
im like LOL... mine can do only about 287 3-4-4-8 max no primestable but superpi8M :(
-
Yay \o/ for cherry picked ram :D
-
Quote:
Originally Posted by Eldonko
I think it's more like 1 out of the total amount produced to date ;)
Yeah :eek:
-
Quote:
Originally Posted by rodman
Weird how the 'G skill' name is not shiny on those heat spreaders. All the ones that I have seen from the egg have shiny logo's, not grey like that:confused:
Though the Egg does show them in stock again, new batch maybe;)
actually they do have shiny logos :) . its probably the flash on the camera.
-
For me 2GB set running under 3-4-4-8 is not that impressive already :nono: as I know OPB has done DDR605 with 3-3-3-7 CPU-Z Verified without any problems. However, I'm not sure if he has run any further stability bench. So maybe he will post some more details later....:slobber:
http://img63.imageshack.us/img63/860...bddr6054lf.jpg
-
Thats a validation only, lets see him complete a 32m with those timings/mhz.
-
Can anyone tell me what OC will run games stable on this memory pls?
-
Anyone running these on an RDX200? My 2gbhz's crap out at 265 with 3-4-4-10 1T timings. I was expecting a lot more from these :(
-
AFK_Matrix-Every set of memory is different. There is no set "OC" for this memory, or any memory really. You have to expirement yourself, but im sure you can use the many posts about this memory to give you an idea of what would be stable.
-
Quote:
Originally Posted by kakaroto
That is just amazing. Didn't knew UCCC can do DDR600 too, until now :D
Congrats with your new WR.
This is really rare, i think 1 of the 20 kits will do this.
My same thought....but I just answered to the other buy running the samsung Ic's on samsung pcb @ 310...unbelievable....
-
here's mine at the moment... I know that I still have tons of headroom on both the CPU and RAM, but i'm still trying to figure out how to set all of the GENIE bios stuff to max it out...
BTW, congrats on those 300mhz uber-sticks you have! I can only wish... lol.
http://members.cox.net/opetruzel/2700mhz-1.jpg
PS: Add 10C to the CPU temp...
-
Any reason for the double post?
-
Quote:
Originally Posted by pcdoc1
Any reason for the double post?
your rig is very similar to mine.. what voltage and cooling are you running that on to get 2808 stable?
just curious...
-
Quote:
Originally Posted by kk228
For me 2GB set running under 3-4-4-8 is not that impressive already :nono: as I know OPB has done DDR605 with 3-3-3-7 CPU-Z Verified without any problems. However, I'm not sure if he has run any further stability bench. So maybe he will post some more details later....:slobber:
http://valid.x86-secret.com/show_oc?id=64950 - taken 1 min ago with cpu-z 1.31.2 to show the mfg properly ;)
http://eclipseoc.com/phpwcms_filestorage/1/1_149.png
you guys will see some more soon. waiting on a new cpu first (note the 2T)
-
Hi all.
My HZ is now on Memtest86+ at 270MHZ 3-4-3-6 1T :banana:
I´m trying to get the best timings for 275Mhz and i´m going slow to get 275Mhz.
But is hard to past 270MHZ stable, first i got errors on test5, then i get only 1 error at test8, now i made some change on TRRD and that can get me 270Mhz stable at that settings.
Then i will try Super PI32M :toast:
-
And Those Would Be
Settings PLEASE:fact:
Quote:
Originally Posted by Counter CS
Hi all.
My HZ is now on Memtest86+ at 270MHZ 3-4-3-6 1T :banana:
I´m trying to get the best timings for 275Mhz and i´m going slow to get 275Mhz.
But is hard to past 270MHZ stable, first i got errors on test5, then i get only 1 error at test8, now i made some change on TRRD and that can get me 270Mhz stable at that settings.
Then i will try Super PI32M :toast:
-
Give me 20min to ~end the Memtest86+ and see what i can get :toast:
-
:banana: I made it ! 270Mhz 3-4-3-6 1T
First run OK, i ´ll let this run 1 more ~to see if they can pass 2 runs
Here is a pic of the current test :toast:
http://img206.imageshack.us/img206/9...361t2lx.th.jpg
-
Quote:
Originally Posted by mad mikee
Settings PLEASE:fact:
Yah settings please :D
-
hehe S/N begins with 0511 i have 0512,
well lets see :D
-
-
first 4 S/N numbers?
nice sticks, keep them up and try 3-4-4-8:toast:
-
-
Note: This memorys don´t go below 270Mhz, iven if we use 3-4-4-8 1T with this Mobo :slapass:
I think is time to buy an "Expert Venus" :slap:
Or a NEW BIOS fpr this FCKNG MOBO !!! DFI move your ass
-
Quote:
Originally Posted by Counter CS
Note: This memorys don´t go below 270Mhz, iven if we use 3-4-4-8 1T with this Mobo :slapass:
I think is time to buy an "Expert Venus" :slap:
Or a NEW BIOS fpr this FCKNG MOBO !!! DFI move your ass
Yap new bios;)
-
ya, a new bios for the Expert would be great... but im not holding my breath!
-
Quote:
Originally Posted by Counter CS
Note: This memorys don´t go below 270Mhz, iven if we use 3-4-4-8 1T with this Mobo :slapass:
Mine are exactly the same - 270 lovely, 271 BSOD, lockup etc.
-
Today i checked the CPU and Mems voltage onboard.
Guess what?
CPU : BIOS set to 1.35v, mesured 1.340v
Mems : Bios set to 2.6v, mesured 2.526v (WTF :eek: )
