athlon 64 3800+ x2@3000mhz full air :D

7700cu, all air cooling from italy :D

Hardware: 3800x2, 512x2 vitesta pc 4000, asus a8vdeluxe via kt800pro, air cooling (zalman 7700cu), zalman 400watt.
oS: windows xp mediacenter 2005


ADA3800DAASCD CCB2E 0541XPMW

-3000mhz 1.550 volt superpì 32mb (bad timing 'cause 3:2 cas 3-4-4-8 t1 disabled, I test it only to verify stability).
http://img396.imageshack.us/img396/1...32lr5vn.th.jpg

-3066mhz 1.568volt cinebench 2003
http://img498.imageshack.us/img498/7...nch26qc.th.jpg

- 2730mhz 1.350volt (windows 1.325) double prime 95
http://img230.imageshack.us/img230/3...e6id5aq.th.jpg

Actually I'm making 2700mhz 1.300volt (lower than default) rock solid cpu

http://img267.imageshack.us/img267/250/fico5pk.th.jpg


Only screen@3100mhz
http://img175.imageshack.us/img175/6...imo37db.th.jpg


MY poor system@full air

http://img175.imageshack.us/img175/5...iiii6di4fq.jpg

First off welcome to the forums :woot: I hope you enjoy your stay with us! If you need anything we are here to help!

Very nice oc man! But you need to clean the case up its a bit dusty:)

Quote:

---

Originally Posted by njkid32

First off welcome to the forums :woot: I hope you enjoy your stay with us! If you need anything we are here to help!

Very nice oc man! But you need to clean the case up its a bit dusty:)

---

Thanks, I hope so.

I like that dust :D

On a VIA motherboard? I know oldschool overclockers used Via, but arent their motherboards just plain sh.t now? :)

EDIT: Thats a real effort. Good Work!

Zerothehero- What stepping is that ? I've got one I can't get over 250x 10 without going over 1.55V.

Quote:

---

Originally Posted by TwoMunsters

Zerothehero- What stepping is that ? I've got one I can't get over 250x 10 without going over 1.55V.

---

This cpu is the best x2 cpu on a big italy forum. I had great luck to have it.
Is it useful this screen to recognise the stepping?

http://img351.imageshack.us/img351/3...13333337wy.jpg

Quote:

---

Originally Posted by 5days

On a VIA motherboard? I know oldschool overclockers used Via, but arent their motherboards just plain sh.t now? :)

EDIT: Thats a real effort. Good Work!

---

It should be more useful a dfi motherboard with nforce 4..but I'm not a professional overclocker..
I have an asus a8vdeluxe and a zalman that it's not so good on 12v line (10.94 v instead of 12.00volt).

Quote:

---

Originally Posted by zerothehero

This cpu is the best x2 cpu on a big italy forum. I had great luck to have it.
Is it useful this screen to recognise the stepping?

http://img351.imageshack.us/img351/3...13333337wy.jpg

---

the stepping can be read only on the IHS of the cpu, it's needs you to take off your zalman

this?

ADA3800DAASCD CCB2E 0541XPMW 015

I don't want to move another time the big 7700cu

Quote:

---

Originally Posted by zerothehero

this?

ADA3800DAASCD CCB2E 0541XPMW 1358177K50015

I don't want to move another time the big 7700cu

---

0541XPMW is the stepping
0015 is the batch

very good batch and stepping ;)

I have taken to case this cpu not considering the stepping

i want same CPU!!
you are so lucky!!

congrats!!

:woot: :woot:

only luck :)

in the meanwhile
http://img454.imageshack.us/img454/8...anwhile1mv.jpg


1.296 volt 2700mhz 3:2 225 front side bus 3-4-4-8. double prime 95 about 3:12:31 hours.

That chip is exactly the same as mine: (different week but similar batch)

http://img217.imageshack.us/img217/7...57copia5of.jpg

And he can do this:

3466Mhz


----------------------------
STOCK VCORE

http://img391.imageshack.us/img391/1...0stable6bu.jpg

I've found a way to enable t1

http://img456.imageshack.us/img456/5965/ultimo2oh.jpg

30 seconds 3-4-4-8 3:2 [225 fsb]

*pol mine is CCB2E not CCBWE

I know, I was talking about...:

Quote:

---

Originally Posted by starostise

0541XPMW is the stepping
0015 is the batch

---

Quote:

---

Originally Posted by PoL

I know, I was talking about...:

---

Ok..I'm a little newbie about batch and stepping..what does it mean those number?

want an awesome result, and on a asus/via platform makes it almost insane... very nice! :)

dass!! awesome x2!

3 ghz rock sólid!

congratz! it's rare CPU ;)

Quote:

---

Originally Posted by zerothehero

this?

ADA3800DAASCD CCB2E 0541XPMW xxxxxxxx50015

I don't want to move another time the big 7700cu

---

It's not too good of an idea to post your full serial number of an overclocked cpu. ;) It's always better to be safe than sorry.....edit your post asap. Great cpu you've got there!

@POL: Your cpu's nice as well, but it's a completely different cpu than the OP's. The only thing similar between your cpu and his is that it was made on the same day of the week - ;)

Quote:

---

Originally Posted by mag|c

want an awesome result, and on a asus/via platform makes it almost insane... very nice! :)

---

Thanks...unfortunately asus a8vdeluxe seems to undervolt the voltage of cpu.
When I set 1.325volt (default voltage of a x2) in windows there is 1.300volt.
However no problem for stability even deeply overclocked.

And zalman 400watt give me only 10.90volt on 12volt line :eek: I should replace this stuff.

Quote:

---

Originally Posted by s7e9h3n

It's not too good of an idea to post your full serial number of an overclocked cpu. ;) It's always better to be safe than sorry.....edit your post asap. Great cpu you've got there!

@POL: Your cpu's nice as well, but it's a completely different cpu than the OP's. The only thing similar between your cpu and his is that it was made on the same day of the week - ;)

---

Edited.
for warranty reason?

Quote:

---

Originally Posted by destr0yer

dass!! awesome x2!

3 ghz rock sólid!

congratz! it's rare CPU ;)

---

Not rock solid. 32mb is not sufficient to declare a rock solid cpu.
At 3giga@1.550volt the cpu is too hot (55 degree, 7700cu zalman) and the chipset reaches 73 degree (kt800pro is passively cooled).
So even it's a piece of cake to bench @3000mhz 1.550 volt (on windows 1.500volt) to Reach perfect stability (10-12 house prime 95 ) I prefer to use this cpu@2700mhz 1.325 volt...because at this lower voltage than default it's cool.
I should use liquid cooling to declare this cpu rock solid@3000mhz.

12 line of psu problem (too low?)

http://img275.imageshack.us/img275/7...55555558ad.jpg

LOL i suggest you measure your vcore with a Digital multimeter because you cant do that high OC when undervolting!

Quote:

---

Originally Posted by Pr4y3r

LOL i suggest you measure your vcore with a Digital multimeter because you cant do that high OC when undervolting!

---

Zalman 400watt made the same on 12 line with p4p800se and ic7-g (alwais under 12volt)

A when I say that @3000mhz it's too hot :stick: @air cooling

http://img236.imageshack.us/img236/5925/30008go.th.jpg

processore(italian)=cpu(english)

EDIT: 10.94 volt zalman 400watt sucks ^_^.

well he's doin it
My 3800 can do 2500+ with 1.35
I undervolt to 1.2 and shell do 2400 so it can be done, they do get hot but going topless will dramatically lower ur heat, but run the risk of damage ur cpu, so dont try it.. Unless ur comfortable..

Btw fellas where did you purchase these cpu's from if you dont mind answering.. how long ago also

You've got a great batch number there. I have a 0020 FX-57 on the way... :D

Quote:

---

Originally Posted by freecableguy

You've got a great batch number there. I have a 0020 FX-57 on the way... :D

---

After making a quick stop-over at my place, right? ;)

I wish, I too could visit s7e9h3n sometimes :eek: , perhaps one fine day it would be possible... :cool:

stunning cpu

http://img373.imageshack.us/img373/2...d0154544yy.jpg


2600mhz 1.216 v-core

wow :eek:

Man that just sucks for all of us praying for such a CPU, mine was close but this is totally impressive, mine would do 2.4 with 1.2 2.6 is sick sick sick....

Keep it going..

Oh mine was CCBWE 0528MPMW

I think to put in finally at 2700mhz..it's the best considering low voltage and mhz..

http://img321.imageshack.us/img321/679/provarrr0wq.jpg


http://img284.imageshack.us/img284/4...ture1on.th.jpg

temp between 46-48 degree during 5,30 prime 95 large FFT (one of the most power-consuming benchmark)

georgeously pure silicon you got there.

Wow, this cpu is somewhere in the range of the WR 4600+ I sent OPB awhile back. But the ultimate test would be to see if the memory controller can function like the 4600+......@ -110C ;)

man 2700 @ 1.28 is a Beast....
FX 60 rebadged :P

good work :toast:

Quote:

---

Originally Posted by freecableguy

You've got a great batch number there. I have a 0020 FX-57 on the way... :D

---

what means exactly the batch nr. ?

Lower batch = better core ?


bye!


P.S. nice CPU :cool:

NEW RAM (gskill 1024x2 ZX pc 3200) NEW BENCH

Always air cooling (7700cu)

3104mhz ram 2-2-2-5 T2 ENABLED, low "score" because this ram are not for benchmark.

http://img178.imageshack.us/img178/7...chabile8qf.jpg

you must be able to run that RAM higher than 155mhz though. I know it's not nescarrily the best, but it normally does at least 250mhz with 2.5-4-4-7 or so (i think).

Loosen the timings and increase the mhz, you don't need (or in this case, want) to stay at 2-2-2-5.

No way..asus a8deluxe has many problem with 5:3...so I have to use 1:1

8mb full air, windows OPEN :D 40degrees CPU lol..

http://img227.imageshack.us/img227/936/31048mb2oi.jpg

And 3150mhz superpì 1mb http://img213.imageshack.us/img213/9...board018eh.jpg

Bad-Bad timing...:slapass:

Quote:

---

Originally Posted by zerothehero

No way..asus a8deluxe has many problem with 5:3...so I have to use 1:1

8mb full air, windows OPEN :D 40degrees CPU lol..

http://img227.imageshack.us/img227/936/31048mb2oi.jpg

---

LOL...sorry to say, but that has got to be the ugliest pair of 8m's I've ever seen run @ >3Ghz......:p:
Edit: Scratch that....it's the ugliest pair of 8m's I've ever seen run...period.....please fix something....:D

Quote:

---

Originally Posted by s7e9h3n

LOL...sorry to say, but that has got to be the ugliest pair of 8m's I've ever seen run @ >3Ghz......:p:
Edit: Scratch that....it's the ugliest pair of 8m's I've ever seen run...period.....please fix something....:D

---

I know :slapass: :banana: but asus a8vdeluxe has problem@3100mhz and 3150mhz with 3:2 and 5:3..:banana:

No way to have T1 enabled :banana: :slapass: :nono: LoL

where do you buy your cpu ? it's possible to buy me one and i send you the monney ? i'm italian and i have possibilite to send me the cpu in italy

ti ringrazio, o famiglia in italian se puoi mandarmi un cpu in italia ti mando i soldi cosi la familiga mi rimanda lo cpu :D

La cpu l'ho presa usata nel mercatino di hardware upgrade a 300 euro..non so se il venditore ne ha altre..ma penso sia difficile..

Quote:

---

Originally Posted by zerothehero

La cpu l'ho presa usata nel mercatino di hardware upgrade a 300 euro..non so se il venditore ne ha altre..ma penso sia difficile..

---

mm.... la fortuna un giorno sara con me.. se puoi comunque fare una picola ricerca sarai gentillissimo !

ps : scusa per il mio italiano, non e perfetto perche abito in svizzera :D

wow 3150MHz benchable...........what a CPU

hey man find some phase change or mousepot and set some world records with that monster:eek:

Quote:

---

Originally Posted by DltdApS

ps : scusa per il mio italiano, non e perfetto perche abito in svizzera :D

---

yeap your italian sucks......j/k

first things first, find some DFI Ultra-D. Cheap and should increase your SuperPI scores by a good 4-5 secs (given how much better the mem will clock).

Quote:

---

Originally Posted by dinos22

wow 3150MHz benchable...........what a CPU

hey man find some phase change or mousepot and set some world records with that monster:eek:





yeap your italian sucks......j/k

---

CCB2E

Will it like the cold? ;)

Quote:

---

Originally Posted by GMX

CCB2E

Will it like the cold? ;)

---

just seen and FX60 today with similar stepping that was doing -40C so i don't know man.............maybe this one's a freak

he'll certainly have a really hard time achieving decent clocks at low temps with high HTT :(

Quote:

---

Originally Posted by dinos22

wow 3150MHz benchable...........what a CPU

hey man find some phase change or mousepot and set some world records with that monster:eek:





yeap your italian sucks......j/k

---

your italian is non-existent

Quote:

---

Originally Posted by don_vercetti

first things first, find some DFI Ultra-D. Cheap and should increase your SuperPI scores by a good 4-5 secs (given how much better the mem will clock).

---

I don't want to make record :D ...in fact I havent' bought 2x1giga crucial ballistics or a dfi ultra-d....
I wanna know the limit of this cpu@air cooling..:D with a "mainstream" motherboard such as a asus a8vdeluxe and with 2 giga of jskill zx ram.

Dam thats one hell of a cpu.. I'd sure like to know what it would do on a DFI !

I've just bought a brand new motherboard better in "overclocking stuff"..

a dfi sli infinity....low price (110euro) e good overclocking :D :banana:
I need this motherboard to have a digital video-card (terratec 2400i).
A peace of cake with this mobo...finally T1 works...no optimization.

http://img370.imageshack.us/img370/7...board011sk.jpg

cinebench@3107mhz.
http://img218.imageshack.us/img218/791/dfi6mv.jpg

I have a strange problem with a dll@3220mhz...:p:

http://img10.imageshack.us/img10/1690/normale1fm.jpg


:)

Nice chip, I have very similar. And for the guys wondering about - temps, it's pretty bad cold bugged CPU.

RDX vcore wrong with this board & CPU-Z, real is 1.54v 0529SPMW

http://img.photobucket.com/albums/v3...63-715-877.jpg

http://img13.imageshack.us/img13/8941/cake5aq.jpg

low v-core high frequency 1.450volt@3000mhz :banana:

Quote:

---

Originally Posted by njkid32

First off welcome to the forums :woot: I hope you enjoy your stay with us! If you need anything we are here to help!

Very nice oc man! But you need to clean the case up its a bit dusty:)

---

Dusty??cmon it´s seem´s lika coffin.put your vacuum cleaner at good use.:)

He made a FX-66 With that 3.2ghz OC. =P

^^ Thats some nice :banana::banana::banana::banana: eh..

Nice overclock ! Seems that somes B2 like cold... strange.

damn nice i want the same CPU!:slobber:

http://img352.imageshack.us/img352/6...picchio9lm.jpg

another rock-solid configuration...always 7700cu air cooling@2807mhz.

Man dude ur CPU owns it...
Mines at 2.7 now with 1.52 but I cant go higher because of heat problems, even with 90c lapped bracket removed and IHS topless on 3800 I dual load at 62ish

wierd I can do 2.5 with 1.35 but another 200 mhz calls for another .2V to acheive