Finally:D..
Cooling power by Mickymouse 3 inches mousepot.
Not easy though:p:
**BH-5 is what I got from TeamGroup:toast: Thank you for doing your best, General Douglas!!:D
CPU-Z verified:
http://img202.imageshack.us/img202/4025/cpuzv1oq.jpg
shot from digital camera:
big size, sorry:p:
http://img209.imageshack.us/img209/2147/283bh58kc.jpg
**later , I will do TCCD above 300x12 on my no cold bug fx57;)
I think i need to do something after the work this dont look good ;)Quote:
Originally Posted by Onepagebook
Gratz to nice speed :toast:
Nice one! :toast:
Omg, so tight subtimings at this speed, great :toast:
xtreme result as always opb - fantastic job :clap:
Very nice OPB, damn - thats hot :D
Is readpreamble @ 3.5ns possible at that speed?
thats xtreme! :toast:
those are the best 512MB BH sticks Ive ever seen! :slobber:
I feel like a looser with my best SPi 32 at 28min :D
Impressive man:toast: So what temps did the ram's were at? I got to try me those Amd's sys in my chiller -21c on ram and mem controler @load can be nice but im sure it would not top this;)
Fx-57 0524vpmw ?
Nice done my friend, very nice.
Why does the thread say BH-5 but your CPUz submission say TCCD DDR600?
Quote:
Originally Posted by Onepagebook
I tought your girlfriend was in town???Or did you drop her off on th airport? GJ as always!
Nice run OPB. Any pics of the set up? BTW, I think the 2x512 record is:
http://xtremesystems.org/forums/showthread.php?t=74067
Quote:
Originally Posted by 5days
Where do you see that?
That is very good. Why is the 13x less cooperative than one above or below, are the Teams avail. in US, and what bios did you use for this? Did you try any others?
Left up in CPU-Z screenshot -->Submitted by...Quote:
Originally Posted by live2game2003
Awesome looking results so far with that beastly 3" pot:woot: Now lets see some 14x280 or 15x260 action hehehehe
Tim
Quote:
Originally Posted by moddolicous
Thank you guys,
haha, bro, 290mhz is kinda nice, but think about the multiplier;)
Quote:
Originally Posted by 5days
Cuz I was trying to test my Team TCCD ddr600 and read Ozzimark's pm regarding cold bug program after I done that bh-5 and I forgot I also have cpuz.cvf file I would like to submit to verify just a accidentally made the mistake on my name though, sorry, I will correct it if I can.:p:
Here is the pic I show ozzimark when I just figured out my fx57 without any cold bug even ram:cpu 1:1 to 305htt;)
That's very impressive especially under cpu core temperature@ -40c colder
http://img222.imageshack.us/img222/5...coldbug3qm.jpg
Very nice kev!!!
Bleh...@305 1:1, time should be faster than that Kev.....;)Quote:
Originally Posted by Onepagebook
http://img345.imageshack.us/img345/4347/14x2621m2vj.jpg
Keep up the great job, bro :toast:
As OPB's probably trying to catch up on some sleep, I'll do my best to help him out and post a pic of his setup:Quote:
Originally Posted by LucusScott
http://img79.imageshack.us/img79/3264/setup8xl.jpg
That's his SS connected. His cascade's to the left and I'm sure his containers are lying around somewhere....
wOw :slobber:
same model UPS I use hehe :D
Should have been there before I told him to get that. He was using a Belkin 650VA and was wondering why an alarm kept sounding everytime he loaded his system :DQuote:
Originally Posted by STEvil
i'm envious ;)Quote:
Originally Posted by s7e9h3n
Quote:
Originally Posted by s7e9h3n
dang...you use BH-5 , I merely random run for TCCD 610, 2.5-3-3-5:D no tweaks ..and only short for 0.03s..:slap:
also, that DDR610 is on the Ultra-D;), if you are on ultra-D, I don't think you can beat me:D
Quote:
Originally Posted by ozzimark
Don't be, cuz you 'll owe me as you said:D
the pic steve show has been outdated since last month my old apt caught fired, now, all my toys looks like this:
BTW, the 3in mousepot is on the desk.;) the real tough unit!!
http://img230.imageshack.us/img230/9854/eniv4tb.jpg
lmaoQuote:
Originally Posted by s7e9h3n
Took my system (XP-M 2500+ @ 2.5 1.875v, 9700pro), friends system (Winchester 3000+ @ 2550 1.55v), Samsung Syncmaster 2200NF (22" CRT), and a Sun T-Rex (24" widescreen CRT) to make this thing beep at me.. after I plugged in my XP-M 2400+ laptop lol :D
Great job...
Man is that a mess in that picture LoL
Cascade, mousepot 3", lots of other cool stuff...
OPB what are you up to?? - Making me jalouse :slapass:
Nice stuff man :woot:
Hey that's awesome!!
Good one :clap:
What do you mean with that?Quote:
Originally Posted by Onepagebook
That Stephen can run much tighter timings on his BH on the expert than he would on the Ultra-d ;)Quote:
Originally Posted by PoL
Quote:
Originally Posted by Onepagebook
Lucky boy :D
aww nice Kevin.
You have great stuff there ^^
OPB always gets all the goodies, im also envious...
And why? I mean... is this on all Experts?Quote:
Originally Posted by SlackeR
Kind of weird though... I've tried different Experts and never noticed that.
true enough :D:DQuote:
Originally Posted by Onepagebook
also, is that a situations chair? i have one that looks realllllly similar :banana:
PoL, the expert's layout was tweaked a bit to allow for tighter timings at higher mhz
Nice ram Kev, and nice cold bug less FX... :p: :toast:
True....BUT.....have you seen the layout on the Rev. AD0 Ultra/Sli-D? ;)Quote:
Originally Posted by ozzimark
Sounds strange, I use Ultra-DQuote:
Originally Posted by SlackeR
2x 512mb G.skill GH
274mhz 1.5-2-2-5 7-12 tight all the way except trtw = 2 (it needs to be for high frequency...) - and readpreamble @ 3.5ns :)
This is tight for an ultra-d (in fact, this is probably as tight as BH-5 can run on the board). You do know that cl1.5 on the Ultra-d is SLOWER than cl2.0, right? ;)Quote:
Originally Posted by M.Beier
http://img437.imageshack.us/img437/6585/11x2741m0nc.jpg
Well, i've tested cas 2 and 1.5, about the same performance, but... I actually gained quiet a bit :) - And since cas 1.5 doesnt excists, I wonder why... - But it was like 2ns @ everest, but 0MB/s @ Sis, in PiFast / SuperPI it gives a desent boost :)Quote:
Originally Posted by s7e9h3n
Tras = 0 is a major :nono: on my setup, it gives mega negative effect @ performance, we're talking 0.2-0.3 sec @ 1M
TRRD, never tryed less than 2, dont think it'll perform better :)
Thanks man. :)Quote:
Originally Posted by ozzimark
This is the tighest timings I did on a DFI SLI-D and 2x512MB Mushkin level II:
http://img491.imageshack.us/img491/1...sive7ie.th.jpg
(maybe I didn't try with a lower read preamble and asynx latency).
Haven't tryied yet on the Expert and wil not do it.. i've just sold that mushkin... (4x512 wasn't running fine on my Expert, ordered some Gskill).
this i have not. it got tweaked from the A.C0 i have? :toast:Quote:
Originally Posted by s7e9h3n
Bingo....now you know why OPB loves his Ultra-d again ;)Quote:
Originally Posted by ozzimark
Man, too bad I wasn't around when you were selling your sticks....IIRC, they were awesome....if you still wanna let a pair go, LMK. thanks.Quote:
Originally Posted by krampak
Don't look @ the settings as individuals. Try my timings as a group and then see if your theory hold true ;)Quote:
Originally Posted by M.Beier
Oki, I'll try that then, only thing I wont do is ras to cas = 1 :P - Tryed declocking in order to do that, but its just not possible :rolleyes:Quote:
Originally Posted by s7e9h3n
Going 2 bed now, was outside tryin' to reach 40k @ 01SE with a 3700+, x850XT, no vmods... - But sadly, the liquid froze on the heatcore and the temp @ GPU went from 1 deg C to 20 deg C, and 1M spi, no matter vcore / speed caused reboot... (was -6 outside, but I got some neat gear to make water reach amb :P)
are you gonna try ln2 on that non coldbug fx-57??
Heya Predator hows it going?
@ metro my guess is that he will not be using ln2 on this chip. Just a educated guess as he has no dewar.
Quote:
Originally Posted by ThePredator
I might try to go 12x300.. or 11x300 under PCICE cascade.:eek: :p: :toast:
nice UTT Kev..........very nice
any decent 32M times
cool the mem to around 0cQuote:
Originally Posted by Onepagebook
As I know, Team has just got a excellent batch of BH-5 die utt, the best one can easily does 3.0v DDR500.. I am like ....:eek: :slobber:
Taht is just insane Kev. I can't wait till I gert the money to play with some A64 power. Working on a mobo deal soon then awaiting money for cou hehe.
Tim
How about ~310x12 1:1 @ 2,5-3-3-x for WR 32M run?
hehe, and we all know you would love to have some of that. 250mhz with only 3v is nuts.. that should be good to what, ~280-290mhz at higher vdimm?Quote:
Originally Posted by Onepagebook
One thing i have learn is that low vdimm and high mhz dont always mean they clock highest with high vdimm and good cooling, but its very nice sticks OPB have found.Quote:
Originally Posted by ozzimark
Quote:
Originally Posted by Lastviking
Exactly, that all depends on how your memory controller can hold that high fsb on the high voltage.;), we will know on the Friday;):slobber:
Killer mem clocks as usual OPB :toast:
These are the results that i have at 3.05Ghz.. i think they are a bit worse than urs s7e9h3n (better time, but more mhz..), oh well, and kamprak too. Any suggestions?
http://img104.imageshack.us/img104/5255/xsorz9yq.th.jpg
Impressive results OPB, waiting for more :toast:
That's quite awesome considering your using an Opty and 2x256 vs my FX and 2x512 :toast:Quote:
Originally Posted by ZeroX