Printable View
:banana: :banana: :banana: :toast: Well I got it today and the stepping is:
CABYE 0543 FPMW :toast:
I also, fixed my w/c loop so I am back up with my system in my sig. Problem is, I have finals and no time to test or even install my new opty for a week :slapass: . But I want to know, is this a good stepping. I know CABYE 0540 are really good, so how are the 0543's?
pop it in and find out! AFAIK, they're not as good as the week 40's...but i at least am still curious.
Is it in yet? ;)
-pickles
Mines is up and Running at 2915 MHz as we speak @ 1.44v so I would say they are Not BAD at all . I have the same stepping as you just installed it 2 days ago and i am prime testing everyday to see how high i can get it up too without to many Volts as the temps really climb on these 148's fast, mine is 37 c no load and load is up too 47c at these volts.
Nice man, very nice :) Where did you get it from?
My CABYE 0540 FPBW runs at 3G... 36C idle 47C stressed.. It's a great chip..
NC™
NightCrawler™, what cooling and voltages are you using at 3Ghz?
http://img204.imageshack.us/img204/1208/320ps.th.jpg
0543FPMW Opteron 148 ;)
Damn thats awesome, now I really cant wait lol! What cooling is that with elh4jj4j? I will be using water, but I havent installed it and I wont be able to till after this coming friday hehe....Im SOOOOOO Excited now. O yes, and I bought this opty from newegg retail.
Where did you guys order your optys from? Retail or OEM?
OMG !!! yes what cooling is being used??
Watercooled...
Same as yours, [IMG]http://img470.imageshack.us/img470/4...23138ve.th.jpg[/IMG] [IMG]http://img470.imageshack.us/img470/8103/256606nf.th.jpg[/IMG]Quote:
Originally Posted by madgravity34
Lol, now I am smiling like crazy! I had my fingers crossed I would get a stepping that did 3 max, now I really cant wait because Im on h20 and two of you are getting close or at 3.2!
This is perfect because if I can get 3.2 stable on water, then Ill be able to bench 1:1 with my awesome tccd that does 320FSB @ 2.5-4-3-7 2.8v!!! I bet this opty would have helped me break 21k with my stock cooled 7800gtx in 03!! But, Im glad I am back on water cause now I can put some serious volts through my gpu. And by the way, the gpu clock in my sig was only at 1.65V cause this core is an awesome clocker. I bet Ill get 700 with 1.75V.
i got a few CAB2E 0545CPAW's. I built a machine for a customer with one.
Did 3gighz on 1.55vore. These opterons, they are doing great!
I have a question though, do you guys burn in for a little bit before you actually start oc'ing? I was just going to run OCCT for 30 mins after every 10mhz fsb increase
Did you happen to order these from ZZF? Retail boxed 148s?Quote:
Originally Posted by irev210
Call me insane...lol...but guess what? I got impatient and went ahead and popped the IHS off of my opty 148. It was my first time, but I went slow and it popped of with ease and absolutely no damage to any part of the proc. I was surprised by how heavy and thick the IHS's are though, I think it must be about 80 percent of the total weight of the chip. Now I have a cool key chain...hehe....and my impatience furthers because 2morrow I am going to install this baby and get to some clocking.
I'm on air with a Zalman 9500 using 300/10 @ 1.5v Temps go from 34/35 idle to 47 stressed..Quote:
Originally Posted by Cybertronic
NC™
Let me start with a :slobber: drool.
I just got a retail CABYE 0543FPMW from the 'Egg today. After seeing these results Im just a bit excited to get her mounted tonight!!
You will Love it :D These opties are FUN, Ok I finally got my Ram to go up too HTT 305 on my 148 @ 1.45 v im using a 180 Divider and droped down too 10 X , I wanted to see if I could get these EB's to go this high and WOW it worked its not prime Stable after 4 hours I got an error but I never thought i would get this thing too Boot this High. And I tested it for FPS on Aquamark and Scored 96099 on my Little 7800 GT i think thats a Good Score for a single card not in SLI. I will play with it some more this weekend and see what happens.
Pretty good these Opteron 148 CABYE 0543 FPMW
Got this one "naked"
http://atomez.no.sapo.pt/Opty/ihs1.jpg
on a DFI Expert + Geil One
http://atomez.no.sapo.pt/Opty/DSC00804w.jpg
watercooled with nexxxus xp
http://atomez.no.sapo.pt/Opty/DSC00818w.jpg
Gets to 3.2 G, 3.1 GHz day in day out rock solid
http://atomez.no.sapo.pt/Opty/PrimeStable.JPG
i ordered one from monarch -the oem 148 for $207, and this was i think on thursday, anyone have a clue what stepping i might get?
Quote:
Originally Posted by XFxGeforced
Haha same here except I ordered mine on Friday :stick:
I'm wondering too...I get mine on Wednesday!!!:banana: :banana: :banana:
i got mine at Monarch, CABYE 0542, Opty 148.
here is a current stable tastie, on an AsRock 939 Dual, vcore mod only.
ram is Gskill PC4400/4800 FF (2x512)
oh, on air, Big Typhoon, will do over 3 gig, but not stable..............
baldy:slapass:
hot damn:banana:Quote:
Originally Posted by bldegle2
ok i received my 148 today , same steping 0543 FPMW , and i run 3ghz@1.40v
>> http://img264.imageshack.us/img264/5...140v0wx.th.jpg
and i try run 3100mhz@1.525v one time and its ok maybe with lower vcore can do it :
>>http://img182.imageshack.us/img182/3...153v2kp.th.jpg
more tests tomorow.
where did you buy it from?
in portugal , shop near my house 280€.
Hello
The Opteron CAB2E 0546 ists good stepping for overcloking?
The CAB2E's are a little hit and miss so you'll have to test it out and let us know. SOme do really well and others dont.
Quote:
Originally Posted by destr0yer
Slap 'er in and let us know! :)