Printable View
The card is ASUS 6600gt 650/1272, vmod and vmem done, cooled by vf-700cu.
CPU is aircooled Pentium M 730@2700 with cnps-7000cu.
It's actually fastest single 6600gt on the orb with FM approved drivers and #7 if we allow all kind of drivers.
http://service.futuremark.com/compare?3dm05=1536439
What do u think about the score?
Nice!:clap:
That's a pretty good job there, what MB is it? To be honest i'm pretty happy to see a good PM/A64 compare like this ;)
Mobo is p4gd1 without mods, adapter will undergo Hypro5 "ultimate" ct-479 mod. Ram is Gskill BH-5 powered by DDR-Booster. FSB is at 245, started corrupting my HDD above 247. Wanted to go for 03 also, but couldn't save a relatively good 11680 run.
BTW, seems dothan boosts massively GT3 and that the ASUS 2.0ns mems have extremely tight timings, just compare your 5012 run against mine.
LOL trust me i did... Keep goin, i want to see PM vs. A64 in 01-03 and 05 when ya get the chance. Thankfully i'm going to water on cpu/gpu outdoors soon (-10c) with some corsair 3200ll rev1.1 and around 3300mhz on the cpu and see what happens. Kinda looks like my but already got kicked though by your '05 score though.Quote:
Originally Posted by Always
I was aiming for 5100 with a 660/1280 run but the HDD corruption set me off. Also trying to run 3DMark05 would give me an "incorrect bitmap" error. Keep in mind best 6600gt was Troman's but he used some "secret" lod tweaks that I'm not aware of. Still breaking 5k with a 6600gt on air seems quite good to me.
Don't know why 03 gave me very heavy artifacting at same speeds whereas 05 did artifact at all. Card also froze during a 650/1260 03 run. Tomorrow I may try 03 and try to break 5.1k in 05.
I think Troman may have been runnin higher clocks than reported with phasechange on the GPU... I'm not sure... Woulda been nice to have specs listed in his run though. GL dude, that's looking pretty nice so far. I hope the adapter mod brings your CPU up some from where she's runnin now:toast:
If that's the case, I own the air single 6600gt WR now xD
Sweet I only score 6.5ish witn my setup and im impressed with ur 6600 speeds, has he released the ultra mod or whatever it was?
I remember he was keeping it secret for a while right?
nice score man
WOW! nice work!! that's no easy achievement. :)
Not at all. It had not happened before but at 245+FSB I started to get strange errors which prevented me from even opening both 3DMark 03 and 05. It may be the HDD controller, because my mobo hasn't chipset vmod yet.
As far as I know you were on full air, but your score is reasonably higher because you used some diferent LOD tweaks that aren't public currently. Am I correct?
Well done m8 , great score:toast:
Very ! Nice :up:
Lets see how much you get in 3d03 with that :)
Perkam
Holy crap :slobber:
Awesome job! You're close to my card in 05! (~6400)
NickS
that's a good looking score for that card. Bravo.
Wow, awesome job...... knock those AMD guys down a few notches on the stats page ;)
My friend Masell has 5162 3d mark's in 05. Venice cooling by w/c and gigabyte 6600GT 714/1350MHz. http://service.futuremark.com/compare?3dm05=1300418
not bad with my x700 i was scoring over what an x800pro was getting slightly overclocked...so he man great job there...
Dragon
impressive score for a 6600gt. i couldn't break 5k no matter what with my old bfg 6600gt.
woa, I'd like to hear more about those 6800GS's of yours at 600 core. What sort of scores are you getting with a single card? Are you just using WC? Impressive stuff.Quote:
Originally Posted by coolmonk
The card was on AIR cooling??Quote:
Originally Posted by DEVIL K-ce
@Troman
Driver related registry hacks??through Rivatuner or how? How many points do you think you gain along with them? I benched lod 15. Will try lod 1.7 though.
Hi Devil :)
Somethink about my score.... CPU and GPU water cooled.... with ice :) . This score was 2nd at ORB05 all drivers, when I do it. 1st place got MrIcee with -30'C at vga :slobber: ... and little higher clocks;) . In 3DM03 I was 2nd with 11.8k
Have to test 81.95 drivers, but don't think they are any better than 77.72, and with a Dothan I don't get advantage of any of the dualcore enhancements. Also some fresh regtweaks arrived today at my HDD.
With those clocks you should be way ahead of 5.2K, for me, almost every 5Mhz increase in core/mem gives me like 50 points better.Quote:
Originally Posted by MaSell
Hi guys, got some trouble there.
This is done all air, no vmods yet :
DFI LAN PARTY
AMD 3000+ @ 2750
6600 GT @ 618/1200
Holy max tweaked
http://img226.imageshack.us/img226/4...nuza0vy.th.jpg
And look @ this, he's doing a score I cant' understand
http://img344.imageshack.us/my.php?image=452yn.jpg
Any explanation?
@Always : I'll meet you soon :)
Very nice scores guys.........especially since Im scoring around 7000 with 2x 6600GTs :p:
What's the problem with that score? What do you don't understand?Quote:
Originally Posted by Shinuza
Will you meet me on air?
BTW when I finish benching this card (when I think its maxed) I will post all the tweaks and things I have done, not much but I think its the best for all, to share tricks, because everybody likes to see their hardware scoring high.
Ok, no matter finally :DQuote:
Originally Posted by Always
http://devilcrew.chez-alice.fr/3dmark_05_th.jpg
4907 :D
I'll do 5000 tommorow, and if I can have a better CPU I'll meet you for sure :)
Can you give me the compare url for that 4907 score? Are you using lod and so?
You'll need like 664/1300 or so to get you 5000+. If you have problems I'll pm you some tips ;)
Let the match begin :D
650 is a good Mhz value on pure air. Nice work
Regards
Andy
That would be much apreciated...5K awesome dude :woot:Quote:
Originally Posted by Always
Pretty much tweaked there. Lod yeah, other tips so.Quote:
Originally Posted by Always
I've saved the project for 4907, I'll publish when I hit 5000. But my CPU sucks a lot, not even stable @ 2.6 :(
BTW if you want pm me tips go ahead :D
http://www.capoeirabrasil.free.fr/shinuza_5037_th.jpg
I'm coming... :D
nice, i get owned by my 170 mhz mem :slapass:Quote:
Originally Posted by Shinuza
Currently at 4830. Hoping that Always will post his tips so i can hit the magical 5K :D
Come-on dude, keep tweaking and testing, it's the secret. As I might have told before main tweak is a dothan cpu which gives massive cpu power, similar to a 3Ghz+ A64, and still not maxed it out. Having no cpu limits gives high gains with every increase in meme/core vga speed.
Yeah i know, but what about Rivatuner tweaks and settings (LOD, etc)? Also, are there any modded bios i can try? What score are you at now Always? Thanks.
My CPU sucks a lot. So whenever I got a better Cpu or Cooling I won't beat you :DQuote:
Originally Posted by Always
I find doing backups nonsense as long as you are not the #1. My best so far is 5053 but still pretty much left in the card, winter coming and also modded cpu HSF will go in place of the vf-700cu, which is too shabby for me, it can't keep up with the load. As for lod and rivatuner things, I'm not using nothing out of ordinary. Have to try out some tips about the dothan.
Troman has one heck of a lod tweak, but I don't think he is going to share. He posted something about it in a 3d01 benching thread, I think it was kinc's or kingpin's result thread.
Always are you going to run '01 on that dothan? I've been looking for it but don't see your result yet. Lastnight i finally did my first watercooled runs which didn't get me much further @ 1.92v topping out in the 680-695 core area. This is the CPU HSF i was using before Globalwin CAKII with the cute/noisy little delta 60 on it.
The Swiftech block i have on it now knocked the temps down to 38c loaded from 48c on air. I didn't think i'd see that much temperature change with water but it seems to help the heat alot but only 20MHz more on core speed.
I got alittle further in all 3dmarks lastnight, results in sig. Too bad the last '01 run i did had a bad drago lo score but i didn't notice it till i uploaded it later.:cool:
At the moment no 3D01, I think it would be pwnage with the dothan a bit clocked. Only 3D03 and 05. Too many system tweaks that I'm unfamiliar with in 01. I get those temps on air almost ;) (41 loaded). How can you push 1,92 core voltage? OVP kicks in at 1,80v. A bit low core, try cooling the whole card better.
I'm only on air so I guess your results aren't in my class anymore. I'll try to beat them though.
YGPM poki ;)
I didn't notice any problems with OVP kicking in until maybe 2.05v..(i need a new card maybe it'll die):D .. The video would just shutoff when i was at the desktop after 30sec or so. I have a 92mm fan on the component side of the PCB and a 80mm on the top side which keeps the card temps way down vs no airflow. Those previous temperatures were with 1.8v on the gpu in 3d which i thought were pretty good but maybe not?Quote:
Originally Posted by Always
If you get some time to play with '01 just pm what you're getting in car lo, that's the one test that'll really show cpu/ram strength without much hassle.
Impressive GPU clock there, Always.
Thanks Ivan. Will go for benchable 2,8Ghz Dothan and 670/1290 maybe 1300 mem on air. That should get me a trully good score for an air setup. I hope the card doesn't blow up though.
Haven't u improved 05?That speed should give you an above 5,1K score. I see you are on watercooling, correct?
Guys, my score seems really terrible given the card clocks I am running.
Untweaked OS, stock system (3700+ @ 2200 MHz, half gig of BH-5 at 200 MHz 2.5-3-3-5), card overclocked to 684/1323.
http://service.futuremark.com/compare?3dm05=1650143
Am I doing something wrong? ;)
No OS tweaks or tweaks of any sort, just the card overclocked.
http://www.xtremesystems.org/forums/...ad.php?t=82500
seems normal to me:)
of course he uses a pentium M. its the fastest cpu you can get right now. nice work man!
I'm getting there slowly with a bit of OS optimization :)
http://service.futuremark.com/compare?3dm05=1654827
Quote:
Originally Posted by ingentingmendeg
:D :D :D You are right, my first tweak is to use a pentium M on air, which needs a 3,1 a64 to be beaten on air or a good X2 cpu like 2,8 or a bit more.
Second, which I have not yet applied is "want extreme points, go extreme cooling", on air that means putting a thermalright sp97 on a 6600gt.
I'll update soon with pics of the vmods and the cooling.
That's a pretty expensive "tweak" ;). I can't afford to replace either my processor or my motherboard unfortunately :(.Quote:
You are right, my first tweak is to use a pentium M on air, which needs a 3,1 a64 to be beaten on air or a good X2 cpu like 2,8 or a bit more.
I just broke 5K with my entire system stock. Only the card overclocked, to 688/1323.
http://service.futuremark.com/compare?3dm05=1659313
That's 2.2 GHz of Athlon64 POWAH for you ;).
Here you can see a compare between my 5k+ run and yours. I was at 650/1272 clocks.
Compare
but with a CPU that is like 2x faster in 3D lol...all of u guys are doing a GREAT job with those cards keep up the work and throw some dice at ur cpualways and ur card and let her FLY to the moon!!!
Dragon
im waitinf for my dryice ;) my last watercooled results were 11.8k 5,1k
Niiiice spongebob, let's step this up a notch! :)
I'm looking forward to seeing what this core is capable of under really good cooling!
I have a DI tube here waiting. SP97 ready to be sent to the cnc mill to be adapted to my 66gt, backplate is also going the same way. First I will max out on air, then will be CPU on DI and after that everything under DI. Will be some real fun.Quote:
Originally Posted by FireDragon
You guys are crazy :)
I'm looking forward to breaking 5.3K with you guys :D
I've got my Prommie hooked up, going to get to work on my memory and processor soon, see how they fit into the score.
Xtreme cooling for Xtreme systems:
http://img266.imageshack.us/img266/9494/xtreme4ky.jpg
SP97 on my 66gt, still have to tweak the mounting to get best contact. Looking awesome so far.
Uh, I have to find something huge to keep up :)
very nice work Always!
UPDATE: With ambient temp beeing 22ºC I'm having 37ºC idle temps and 43ºC load temps at 610/1250 core/mem respectively. Have to tune the mounting yet because I'm currently on zip ties+Zalman bracket:
http://img73.imageshack.us/img73/1079/xtremeee4zt.png