FPBW 146 @ 3322Mhz,2x512Mb bh5 @ 276mhz 2-2-2 T1(Air)

Printable View

11-13-2005, 12:45 PM
Lastviking

FPBW 146 @ 3322Mhz,2x512Mb bh5 @ 276mhz 2-2-2 T1(Air)

http://files.upl.silentwhisper.net/u...22verified.JPG

http://files.upl.silentwhisper.net/u...mhzsuperpi.JPG

http://files.upl.silentwhisper.net/upload5/276mhz.JPG

Looking nice ? :D Anyone know how high 2x512 WR is @ T1 ? ;)
11-13-2005, 12:47 PM
mongoled

Very nice, but please tell us how cold it is there ;)
11-13-2005, 12:49 PM
M@T!Z

Very nice clocks men. Good job & cpu :)

Sory 4 my english :P
11-13-2005, 12:54 PM
Lastviking

Quote:

Originally Posted by mongoled

Very nice, but please tell us how cold it is there ;)

Not cold here yet, more to come when its geting colder, its about +6c outside now. When its real cold its more like -24c :D
11-13-2005, 01:02 PM
Monge

Very nice. Good job :)

How's CPU temps, max. T-case?
Cpu without heatspreader?
11-13-2005, 01:03 PM
Lastviking

Quote:

Originally Posted by Monge

Very nice. Good job :)

How's CPU temps, max. T-case?
Cpu without heatspreader?

Ihs off, T-case didnt check
11-13-2005, 01:29 PM
Namtaru

Voltage?
11-13-2005, 01:39 PM
Lastviking

Quote:

Originally Posted by Namtaru

Voltage?

1.632v, and 3.68v on the bh5 sticks.
11-13-2005, 01:41 PM
afireinside

Nice! Good to see you back to OCing Lastviking! Don't forget to grab superPi mod 1.4 /w anticheat for your next runs ;)

Have you modded the big typhoon at all? It needs a good lapping ;) If you're outside a case and don't mind noise add a powerful fan such as a delta sucking through the fins and use a gutted 120mm fan as a shroud. If you have foam you can make gaskets to keep it air tight and fill in the caps between the fins and the wall where the heatpipes bend ;)

http://img.photobucket.com/albums/v4...uperaircpu.jpg
11-13-2005, 02:09 PM
twilius_basic

Quote:

Originally Posted by lastviking

Anyone know how high 2x512 WR is @ T1 ? ;)

Not for sure but this is highest I've seen (sangboy):

http://www.xtremesystems.org/forums/...91#post1124591
11-13-2005, 02:38 PM
ZX7891

its 293mhz IIRC....i can confirm 289mhz for sure
11-13-2005, 02:45 PM
shuRe

i know its silly to ask, but im guessing this is of the cabye variety?
11-13-2005, 03:02 PM
Lastviking

Quote:

Originally Posted by ZX7891

its 293mhz IIRC....i can confirm 289mhz for sure

Hmm any screens on that and is it realy T1? and 2x512 and not buged 2x256mb and are it on a amd platform or intel?
11-13-2005, 03:33 PM
bachus_anonym

Quote:

Originally Posted by Lastviking

Looking nice ? :D Anyone know how high 2x512 WR is @ T1 ? ;)

Yep, looks pretty good to me :) Good to see ya back, Lv...

As far as records... There's quite a few people that have done SPi 32M @ 275Mhz (ZderinS and gigi77, from the top of my head). Then there is k|ngp|n's 278Mhz in Pifast, charlie's 280Mhz in Pifast and 288MHz cpu-z validation. I'm pretty sure charlie's 288Mhz is with T1 (ask him If you want) but I do not recall that 293Mhz that was mentioned earlier...
11-13-2005, 03:42 PM
Lastviking

Quote:

Originally Posted by bachus_anonym

Yep, looks pretty good to me :) Good to see ya back, Lv...

As far as records... There's quite a few people that have done SPi 32M @ 275Mhz (ZderinS and gigi77, from the top of my head). Then there is k|ngp|n's 278Mhz in Pifast, charlie's 280Mhz in Pifast and 288MHz cpu-z validation. I'm pretty sure charlie's 288Mhz is with T1 (ask him If you want) but I do not recall that 293Mhz that was mentioned earlier...

Thx for info, cpu-z validation is one thing and its much easyer. But i need at least 281 T1 i see :)
11-13-2005, 03:45 PM
krampak

That's fun, 3322Mhz is just exactly what I did with my 148 CABYE with AirCooling! (hyper6 + cold air) :banana: (but I forgot to make a validation :rolleyes: )

http://img454.imageshack.us/img454/6605/ss8ow.th.jpg

BTW my highest 2x512MB 1T SS was at 289Mhz and using superpi at 280Mhz. (with A64 tweaker opened I only have this one at 276Mhz but with very tight timings.
11-13-2005, 08:14 PM
`SippY

nice, thats some great clocks with air
11-14-2005, 12:20 PM
Lastviking

Quote:

Originally Posted by Monge

Very nice. Good job :)

How's CPU temps, max. T-case?
Cpu without heatspreader?

MaxTcase 61c i got another one with same stepping thats have 63c but its fair away from this in max clocks.
11-14-2005, 04:23 PM
x714n

nice clock :)

didnt OPB hit 302MHz with his BH-5?
11-14-2005, 04:40 PM
GMX

Quote:

Originally Posted by x714n

nice clock :)

didnt OPB hit 302MHz with his BH-5?

2x256
11-14-2005, 11:51 PM
Pt1t

Quote:

Originally Posted by Lastviking

http://files.upl.silentwhisper.net/u...22verified.JPG

http://files.upl.silentwhisper.net/u...mhzsuperpi.JPG

http://files.upl.silentwhisper.net/upload5/276mhz.JPG

Looking nice ? :D Anyone know how high 2x512 WR is @ T1 ? ;)

Dont know what is WR but i got that with new BH5 , 2*512Mo, ~ 285mhz screenable.

http://users.skynet.be/pt1t/144/Sandra_277.PNG
11-15-2005, 02:58 AM
Lastviking

Quote:

Originally Posted by Mike6969

In a month or two im about to break that record easily. Once i get a stable DFI mobo with high vdimm ill be aiming for 280+ with 2-2-2 timing with my Corsair PC3500c2. I've had this ram for years and they never felt 3v until a month ago when i installed them in my 2nd pc on a DFI NF3 250gb which now does 255fsb memtest stable and they go higher in windows using clockgen at only 3.1v .

Lets the aim for higest 2x512 bh5 clocks begin :D
11-15-2005, 03:14 AM
M.Beier

Doubt its the best 2x 512MB speed..

I've done 273 1M stable... On G.skill GBGH
and done 7665MB/s at 258mhz... Thats a eff @ 92.84% :) (CPU became bottleneck afterwards, was a winny 3200+)
11-15-2005, 03:26 AM
dinos22

what were your load temps with 6C ambient.............that's only 20C over sydney temps hehehhe :toast:
11-15-2005, 06:01 AM
Lastviking

Quote:

Originally Posted by dinos22

what were your load temps with 6C ambient.............that's only 20C over sydney temps hehehhe :toast:

Its not +6c ambient temp,the temp outside was that.And the stuff was close to a open window. Full load temp was high about 36c+. hmm summer now in sydney?:)
11-16-2005, 05:33 AM
chainhoe

289mhz UTT 1m stable

seems to be WR?
11-16-2005, 05:45 AM
Lastviking

Quote:

Originally Posted by chainhoe

289mhz UTT 1m stable

seems to be WR?

Thx for info :D
11-16-2005, 07:38 AM
EnJoY

Your timings for the memory could be a lot better. Try the following:

trfc = 12
tras = 3
trrd = 0
twtr = 1
tref = 133MHz 1.95us
max async = 7ns
read preamble = 4.5ns
idle cycle limit = 0 cycles
dynamic idle counter = enable

This is what my mushkin can handle, so try each out, should give you a huge boost in your super pi times and overall lower latency if all of these timings are used.

All times are GMT -8. The time now is 08:27 PM.

XtremeSystems