10/2005 2GBHX announced

Printable View

10-27-2005, 10:29 AM
GSKILL TECH

10/2005 2GBHX announced

Introduction :

GSKILL successfully launched high performance Extreme Memory Series memory modules in 1GB capacities. Extreme Memory Series consist of dual channel and single channel series.

GSKILL continues to utilizes the latest advanced technology in product development. The high performance Extreme Memory Series is engineered for superior performance in an extreme environment.

Specification :

* Package : 2048MB kit (2x1024MB) dual channel pack
* CAS Latency : 2-3-2-5 (PC3200)
* Test Voltage : 2.5 ~ 2.7 V
* PCB Board : 6 Layers PCB
* Speed : DDR 400 MHz (PC3200)
* Type : 184-pin DDR SDRAM
* Error Checking : Non-ECC
* Registered/Unbuffered : Unbuffered
* Quality Control : Comprehensive rigorously tested in pair at dual channel environment
* Warranty : Lifetime

Both single module and matched pair packages will be available through G.Skill’s authorized resellers and distributors worldwide. For more information and specifications of the new HX series products, please visit http://www.gskill.com/ddr.html

Test result---------------------------------------------------------
http://www.xtremesystems.org/forums/...ad.php?t=78109

Place to Buy---------------------------------------------------------
US http://www.newegg.com/Product/Produc...82E16820231034
Europe
11-06-2005, 01:34 PM
vapb400

what is the difference between HX and ZX?
11-06-2005, 03:09 PM
uOpt

Quote:

Originally Posted by vapb400

what is the difference between HX and ZX?

G.Skill series:
- HX: $265/133 PC3200 - 2-3-2-5 @ 200 MHz (light blue(?)), chips undisclosed
- ZX: $213/115 PC3200 - 2-3-2-5 @ 200 MHz (light turquoise), chips undisclosed
- HS: $223/114 PC3200 - 2.5-3-3-6 @ 200 MHz (medium blue), Samsung UCCC
- HZ: $245/122 PC4000 - 3-4-4-8 @ 250 MHz (black), Samsung UCCC

The HZ and HS are the same thing, just binned differently, the HZ is
rated 250 MHz and the HS 200 MHz. The timings at 200 MHz will not be
as good as the HX and ZX sets.
http://www.xtremesystems.org/forums/...ad.php?t=75199
http://www.xtremesystems.org/forums/...ad.php?t=78211
http://www.xtremesystems.org/forums/...ad.php?t=78099

The ZX is their new PC3200 kit. Good timings. It will probably not
go much over 200 MHz (seems very similar to the OCZ PC3200 Platinum),
but there are quite a few people who have it above 250 MHz. Almost
certain Infineon chips.
http://www.xtremesystems.org/forums/...ad.php?t=77205
http://www.ocforums.com/showthread.php?t=421291

The HX is the older PC3200 kit. Didn't see forum users posting
results. G.Skill employee says of the kits they are most likely to
reach 250 2.5-3-2-5, but nothing guaranteed. No info on chips except
he said the chips on HX are more exensive than the ones on ZX (which
are Infineon).
http://www.xtremesystems.org/forums/...ad.php?t=78109
11-07-2005, 10:24 AM
GSKILL TECH

the difference about 2GBHX and 2GBZX
they actually announced at same date

1. different chips/ IC
2. Price
3. Overclock timing

since 2GBHX can do 2.5-3-2-5 @ DDR500 but 2GBZX can not.

@Martin Cracauer
thank you for answer it so detail :)
11-22-2005, 09:07 PM
MadMikeSS

Any word on what chips/ics are being used for the HX sticks?
11-23-2005, 09:28 AM
GSKILL TECH

Quote:

Originally Posted by MadMikeSS

Any word on what chips/ics are being used for the HX sticks?

No, I am sorry :)
11-23-2005, 04:13 PM
MadMikeSS

Well, from everything I've been reading so far, I'm guessing Hynix chips. But what do I know. :)
11-28-2005, 09:22 AM
GSKILL TECH

Sorry but 2GBZX is not using Hynix Chip :) if uses Hynix, there is nothing need to hide!
12-11-2005, 01:02 PM
Vassili

Is the ZX using the new Winbond chip like Onepagebook said?
12-12-2005, 09:52 AM
AndyN

Can HX go higher with looser timings? (i.e. 3-3-3-8 or smthg?)
12-12-2005, 10:01 AM
GSKILL TECH

it is not using Winbond chip and somehow HX like 2.5 better, 3 is not good
12-12-2005, 10:13 AM
AndyN

Quote:

Originally Posted by G.S Technician

it is not using Winbond chip and somehow HX like 2.5 better, 3 is not good

Thank you for your response

And is a chance to go higher with 2,5 but looser other timings?
12-12-2005, 03:49 PM
GSKILL TECH

Quote:

Originally Posted by AndyN

Thank you for your response

And is a chance to go higher with 2,5 but looser other timings?

i am not sure, need to try with them
12-21-2005, 12:13 PM
AndyN

Quote:

Originally Posted by G.S Technician

i am not sure, need to try with them

Did you do that finally?

I bought GSkill HX but don't have time for tests :(
12-22-2005, 09:43 AM
GSKILL TECH

Quote:

Originally Posted by AndyN

Did you do that finally?

I bought GSkill HX but don't have time for tests :(

i hit 250 3-3-2-5 and 3D stable
higher won't go
12-22-2005, 03:35 PM
Mr_Slinky

these were done 1:1 correct i am assuming so but just want confirmation
12-25-2005, 10:31 AM
nVmatrix

I need 265mhz with 2GB kit, so what would you guys recommend? The HZ or HX??
12-25-2005, 12:36 PM
Prospector

I just put a set of HZ in this morning now at 264,so far so good:toast:
12-25-2005, 07:11 PM
nVmatrix

I guess theres my answer:-)
12-27-2005, 10:53 AM
GSKILL TECH

Quote:

Originally Posted by Mr_Slinky

these were done 1:1 correct i am assuming so but just want confirmation

that is 1:1 for my test
12-27-2005, 10:53 AM
GSKILL TECH

i heard the new batch is doing better than last batch! but don't quote on me :)
12-29-2005, 01:11 PM
tbogstad

my F1-3200PHU2-2GBZX 2 x 1gb cas2,3,2,5 is doing 250fsb 2.8V 1:1 in my EVGA nf41 sli at cas3,4,4,8,2T right now prime 95 for 16 hours.

this board is know to have problems with 1gb ram stick not going over 250fsb, and you have to use 2t too.

on my asus kt800pro board it would not do anywhere near that, i guess the nf4 is what near all people use nowadays.
12-29-2005, 01:24 PM
AndyN

tbogstad

This thread is about GSkill HX not about ZX
01-04-2006, 02:58 AM
Kaiser_Sose

Quote:

Originally Posted by G.S Technician

since 2GBHX can do 2.5-3-2-5 @ DDR500 but 2GBZX can not.

So the HX is better than the HZ for OC

HX is rated at DDR500?
01-04-2006, 06:31 AM
palehorse

Quote:

Originally Posted by Kaiser_Sose

So the HX is better than the HZ for OC

HX is rated at DDR500?

HX = DDR400.
HZ = DDR500.

HZ > HX

i think...
01-04-2006, 08:17 AM
GSKILL TECH

Quote:

Originally Posted by Kaiser_Sose

So the HX is better than the HZ for OC

HX is rated at DDR500?

it happened long time ago! now is like DDR500 3-3-2-5
01-04-2006, 01:43 PM
uOpt

Quote:

Originally Posted by Kaiser_Sose

So the HX is better than the HZ for OC

HX is rated at DDR500?

Wrong on both counts.
01-04-2006, 11:12 PM
Kaiser_Sose

I was asking retorically because if that was the case the HX would be better than the HZ
01-05-2006, 07:57 AM
uOpt

It's hard to tell since you ask the same questions over and over here and on dfi-street.
01-05-2006, 11:32 AM
GSKILL TECH

Quote:

Originally Posted by Kaiser_Sose

I was asking retorically because if that was the case the HX would be better than the HZ

HZ is rated DDR500 and HX is rated at DDR400
at stock rate HZ is better
03-01-2006, 05:55 AM
bito

How good were the last HX's for overclocking.....timings etc.
03-27-2006, 01:56 AM
AndyN

What is default Vmem for GSkill HX? My mobo sets 2,7V. Is it correct?