New GEIL ONE S the ONE!

Printable View

10-18-2005, 11:05 AM
gigi77

New GEIL ONE S the ONE!

EnerMax 660w
Fx-57 0530 GPMW
1gb Geil One s TCCD
Dfi nf4-d
Artic Cooling 64 and Mach II GT

this is History! go UP

1,4v cpu 2.5v ram 300 2.5-3-3-5

pi 1mb

http://img437.imageshack.us/img437/6...andfx571xy.png
10-18-2005, 11:14 AM
Kasparz

2.5Vdimm :slobber:
GO GEIL GO :woot:
Burn this baby :toast:
10-18-2005, 04:01 PM
Cpt Twitchy

Beautiful results. Is this retail ram or Cherry picked?
10-18-2005, 05:02 PM
szukalski

Nice results, anything 32M stable yet?
10-18-2005, 09:13 PM
gigi77

http://img148.imageshack.us/img148/3...andfx577ms.png
10-18-2005, 09:16 PM
Vapor

Got a tweaker shot? :D
10-18-2005, 09:21 PM
gigi77

http://img291.imageshack.us/img291/9...andfx574uv.png
10-18-2005, 09:23 PM
gigi77

Yes Vapor i installed My Mach II GT, you have the a64tweaker shot a 32mb superpi shot....

luigi
10-18-2005, 09:24 PM
ghidon

very nice sticks !!!
did you get these from Italy, gigi ?
10-18-2005, 09:27 PM
Vapor

Very nice....310 2.5-3-3-7 :up:

Only looking for a tweaker shot to see if it's worth it to leave my 4800LA for these (they can tighten alpha timings to hell and back). No rush (too bad your FX probably can't do 12x310 under the GT....that'd be killer).
10-18-2005, 09:53 PM
poiuy223

i drool
10-18-2005, 10:41 PM
gigi77

http://img301.imageshack.us/img301/8353/32mbspi1iv.png
10-18-2005, 10:45 PM
Punisher!

Wonderful RAMs! :D
10-18-2005, 10:48 PM
gigi77

hello Punisher!....

go UP to Frequency ram and Down Voltages....heheh it's Fight
10-18-2005, 11:04 PM
gigi77

GO FSB down Voltages.... 2.65v IMPRESSIVE GEIL

http://img390.imageshack.us/img390/9...bspi3054bg.png
10-18-2005, 11:10 PM
Vapor

VERY nice....thanks for the Tweakers too! :up:

I like these a lot--I'll keep my eye out for some :D
10-18-2005, 11:31 PM
x3ro

Gigi i c ur doing some serious overclocking on the ram again.. Looks very very good. But im waiting for more m8. Good luck with ur tccd's

Regards
10-19-2005, 12:21 AM
CapFTP

Quote:

Originally Posted by Vapor

Very nice....310 2.5-3-3-7 :up:

Only looking for a tweaker shot to see if it's worth it to leave my 4800LA for these (they can tighten alpha timings to hell and back). No rush (too bad your FX probably can't do 12x310 under the GT....that'd be killer).

we'll see Vapor....Geil are nice ram...but 4800 LA still have to say something...

go Gigi....scroll down the BIOS menu and let me see what happens above 320....don't be shy dear...

:clap:
10-19-2005, 04:47 AM
gigi77

UP to 308Mhz 2.5-3-3-5

http://img356.imageshack.us/img356/9...bspi3088te.png
10-19-2005, 05:41 AM
ahmad

Quote:

Originally Posted by CapFTP

we'll see Vapor....Geil are nice ram...but 4800 LA still have to say something...

go Gigi....scroll down the BIOS menu and let me see what happens above 320....don't be shy dear...

:clap:

These are 512MB double sided sticks. Single sided 256MB sticks can go 320MHz easy. I'd say these sticks are pretty good.
10-19-2005, 05:47 AM
Vapor

My 4800LA are 512MB double sided sticks....;)

These do pose some competition though....maybe I'll be able to bench my sticks soon and see if it's worth it to sell mine and get these (if they consistantly do this--seems new TCCD does like 2.5-3-3).
10-19-2005, 05:56 AM
FireDragon

by new TCCD you mean TCC5 right?

Dragon
10-19-2005, 05:57 AM
Kasparz

GIGI77 we want to see 330Mhz@2.5-3-3-6 1m stable
That would be amazing :o
10-19-2005, 07:08 AM
gigi77

For GEIL ONE Only Samsung TCCD new for 05xx IC inside

luigi
10-19-2005, 07:24 AM
Vapor

Quote:

Originally Posted by FireDragon

by new TCCD you mean TCC5 right?

Dragon

No...new TCCD ;)
10-19-2005, 07:29 AM
gigi77

Important RESULT.......311mhz 2.5-3-3-5 2.72v

http://img139.imageshack.us/img139/6...bspi3112jb.png
10-19-2005, 07:41 AM
Vapor

32M stable at that level is sweet. :slobber:
10-19-2005, 07:53 AM
ahmad

Thats sic. What timings are they rated at (PC4800/DDR300)?

Those timings with those volts and that freq: harshly binned TCCD or you have the lucky set.

More LDT voltage = more memory overclock? :confused: Could it be that LDT voltage goes to the on-die mem controller.. New setting for me to mess with.

EDIT: Thanks Kasparz \/ \/
10-19-2005, 08:17 AM
Kasparz

Quote:

Originally Posted by ahmad

Thats sic. What timings are they rated at (PC4800/DDR600)?

DDR600 2.5-4-4-8
DDR400 1.5-2-2-5
10-19-2005, 08:55 AM
gigi77

Quote:

Originally Posted by Vapor

32M stable at that level is sweet. :slobber:

only? :p:
10-19-2005, 09:04 AM
gigi77

Quote:

Originally Posted by Troman

i want to see some T2 power :)
not joking here..

T1 :D
10-19-2005, 09:04 AM
bachus_anonym

@gigi77,

Do you have any idea how are those are doing on average? Did you test more than 1 kit of that New GeiL One SE PC4800?
10-19-2005, 01:30 PM
szukalski

That 32M run is just awesome!
Great ram you have there gigi77. :toast:
10-19-2005, 01:48 PM
Zeus

Gigi77, OPB passes 32M at 316x10 2,5-3-3-x with his FF, can you top that?

Very nice RAM you got there mister! :up:
10-19-2005, 10:49 PM
gigi77

i think.....
10-19-2005, 11:34 PM
harpyboy

awesome... i might be thinking to get a set of those .... for ~$200 u can't go wrong
10-19-2005, 11:47 PM
metro.cl

great ram
10-20-2005, 12:41 AM
targ

Gigi your killing me here,

i got my Geil one to DDR600 2.5-3-3-5 (32M stable) and thought that was all they had. looks like ill have to have another go with them after ive finished this run of 3D with my new 7800GTX.

i know mine can do 311 2.5-3-3-0 4M stable. ill post back.

targ
10-20-2005, 01:19 AM
x3ro

that 311 @ 2.5-3-3-6 looks very good gigi... Hope you can top OPB's 316 tho ;)

Regards
10-20-2005, 01:31 AM
kiwi

Quote:

Originally Posted by gigi77

For GEIL ONE Only Samsung TCCD new for 05xx IC inside

luigi

What is the part number of these? Same GOS1GB3200DC only with 05xx ICs? Is it written somewhere where I can read it without taking off heatpsreaders?
10-20-2005, 04:00 AM
gigi77

for Kiwi Yes all GEIL ONE S havent IC Samsung Tccd 05xx
10-20-2005, 09:51 AM
gigi77

up to 313mhz....

show

http://img434.imageshack.us/img434/8660/31321nw.png
10-20-2005, 10:36 AM
gigi77

http://img414.imageshack.us/img414/6899/31527sw.png
10-20-2005, 10:38 AM
bachus_anonym

@Gigi77,

Can you answer my question from post #33, please? Also, are you one of the GeiL Powerusers?

Thank you! :)
10-20-2005, 10:43 AM
wambas

Mine don't run that fast!
10-20-2005, 10:45 AM
gigi77

WR

http://img455.imageshack.us/img455/1469/3170hn.png
10-20-2005, 10:50 AM
gigi77

Quote:

Originally Posted by bachus_anonym

@Gigi77,

Can you answer my question from post #33, please? Also, are you one of the GeiL Powerusers?

Thank you! :)

Yes i'am the first Power User GEIL.

My 317.1 is valid for new first place in your ranking :)

best regards,
luigi
10-20-2005, 10:57 AM
Zeus

Wow!!
You actually did it!

I was drooling over OPB's 316 2,5-3-3-x result and now you are topping it!!

Congrats mister! :toast:

Do you have a fan over the RAM?
10-20-2005, 11:01 AM
gigi77

thanks my friend!

Congrats at all peoples and users Geil in the world !
10-20-2005, 11:48 AM
Kasparz

Show spi1m speed too..
10-20-2005, 12:17 PM
|SiLA|

Quote:

Originally Posted by bachus_anonym

@gigi77,

Do you have any idea how are those are doing on average? Did you test more than 1 kit of that New GeiL One SE PC4800?

gigi he was talking about this post :p

" Do you have any idea how are those are doing on average? Did you test more than 1 kit of that New GeiL One SE PC4800? " in italian in u case u don't know "hai idea quanto fanno queste ram mediamente?hai provato più kits di queste nuove GeiL One SE PC4800? done

coz i wanna know also the answer i'm wondering if only power users getting those lucky tight rams timings/frequency :rolleyes:
10-20-2005, 12:27 PM
TheMeatFrog

Congrats on the new WR! :clap:

This kind of makes me wish I had purchased these instead of my FFs. But I doubt the retail versions (non poweruser/ES kits) of these can do 2.5-3-3-7 at 300+MHz. :rolleyes:
10-20-2005, 12:33 PM
[XC] moddolicous

Nice results gigi. Whats the highest 32mb anyones ever gotten 2-2-2-5?? Maybe 280?
10-20-2005, 12:39 PM
Punisher!

Quote:

Originally Posted by gigi77

WR

http://img455.imageshack.us/img455/1469/3170hn.png

Congrats man! :D

Superb RAMs! ;)
10-20-2005, 01:30 PM
szukalski

Quote:

Originally Posted by TheMeatFrog

But I doubt the retail versions (non poweruser/ES kits) of these can do 2.5-3-3-7 at 300+MHz. :rolleyes:

I had two kits come through my hands, one does 300MHz@2.5-3-3-X@2.7v, the other needed to be at 2.5-4-3-X, albeit at 2.6v (ran up to 310@2.6v no worries though).
The 2.5-4-3 kit didn't get much more testing, so it is possible it was capable of 2.5-3-3, just sent it on it's way to it's owner though.
I've still got the "good" set, been trying to get 310MHz@2.5-3-3 32M stable this morning but ran out of time and had to go to work (damn bills!). I know it does 305MHz though.
I don't know how indicative they are of "normal" retail sets though.
10-20-2005, 01:34 PM
CapFTP

congrats gigi....

stay tuned guys.....we have another italian WR killer.....but is quite shy and still waiting for account convalidation...
10-20-2005, 10:27 PM
gigi77

thanks my friends
luigi
10-21-2005, 04:47 AM
Fabius88

Good work Gigi :)
congrats
10-21-2005, 05:53 AM
Ozan Baseski

Very nice memory you got there. I hope mine could also do above 300mhz at these timings :woot:
10-21-2005, 09:50 AM
gigi77

thanks ozan!
10-22-2005, 06:26 AM
kktham

i just got a geil 1 set 2X512mb TCCD ...i can;t seems to run ddr600 at the default timings 2.5 4 4 7...it gives me errors on mem test 8 ...wonder y ....any 1 can help ?? i hving a dfi sli d board...bios 510-3
10-22-2005, 06:52 AM
uOpt

I have the 2x 256 MB Geil One TCCD set. At 312 MHz I can't do any timing tighter than 3-4-4-8. So yours sound normal.
10-22-2005, 06:56 AM
x3ro

Quote:

Originally Posted by kktham

i just got a geil 1 set 2X512mb TCCD ...i can;t seems to run ddr600 at the default timings 2.5 4 4 7...it gives me errors on mem test 8 ...wonder y ....any 1 can help ?? i hving a dfi sli d board...bios 510-3

Try and play around with the voltage a bit..
10-22-2005, 09:10 AM
Oden

Nice clocks! What's the date of the tccds...? Mine are 519, burning em in!
10-22-2005, 09:14 AM
Zeus

TCCD don't need any burn in, chances are the sticks will do even less MHz after burn in, especially at high volts. :nono:
10-22-2005, 02:14 PM
Oden

Why should they clock less high if you burn them in??? Burn in is like, heavy usage... you're saying that when you use them in heavy load they clock less high, after a while, than when they're fresh out of the retail pack... Besides, when you're using under 3.0V with tccds + active cooling, I don't really see the chance of wearing them out
10-22-2005, 03:06 PM
Zeus

If you want it that way, see for yourself...
10-22-2005, 03:22 PM
865pe

Quote:

Originally Posted by Zeus

If you want it that way, see for yourself...

nice
clock :toast: my G.skill Fx 310 2.5-3-3-5 1T 32mb pass
10-22-2005, 04:09 PM
Ozan Baseski

Quote:

Originally Posted by kktham

i just got a geil 1 set 2X512mb TCCD ...i can;t seems to run ddr600 at the default timings 2.5 4 4 7...it gives me errors on mem test 8 ...wonder y ....any 1 can help ?? i hving a dfi sli d board...bios 510-3

Play with your bios settings. Let me tell you how I manage to take my geil one ram from 275 mhz up to 300 mhz with 2.5-3-3-6 timings. I use 702-3 bios and here are my timings :

Tref 3072, bank interleave: enabled, Read/write bypass:16x, bypass max: 8x, max. async latency: 8.0ns, read preamble : 5.0ns, drive strength: 7, data strength: 2, decrease skew and skew value: 255.
You can set trc to 9-12 and trfx to 14-15, trrd:2, trp-twr-twtr-trtw:2
10-22-2005, 06:14 PM
kktham

Quote:

Originally Posted by Ozan Baseski

Play with your bios settings. Let me tell you how I manage to take my geil one ram from 275 mhz up to 300 mhz with 2.5-3-3-6 timings. I use 702-3 bios and here are my timings :

Tref 3072, bank interleave: enabled, Read/write bypass:16x, bypass max: 8x, max. async latency: 8.0ns, read preamble : 5.0ns, drive strength: 7, data strength: 2, decrease skew and skew value: 255.
You can set trc to 9-12 and trfx to 14-15, trrd:2, trp-twr-twtr-trtw:2

u use at wat vdimm voltage?
10-23-2005, 12:24 PM
Ozan Baseski

I used 2.7 volts for this.
10-24-2005, 05:13 AM
kktham

damn my pair of Geil sticks can't even do 2.5 3 3 6 at 300HTT after having similar settings like urs...tho i using the 510-3fix bios... hmm
10-24-2005, 05:28 AM
gigi77

Nice result OZAN,

i'am ready to 320mhz......
10-24-2005, 01:02 PM
szukalski

Quote:

Originally Posted by gigi77

Nice result OZAN,

i'am ready to 320mhz......

Ooooh nice, we're ready too.. :D

Doing some great work there Gigi. :toast:
10-28-2005, 12:42 PM
funkflix

@gigi77
Can u plz tell me wich bios did u used for this runs, or any other Geil One user? :)

A friend have this sticks wth an FX57 an stuck on 293MHz 2.5-3-3-7, one MHz more and i gives a reboot after Bios-Screen? Memtest works fine with 293MHz! :confused:
10-28-2005, 01:22 PM
gigi77

@gravedigga,

Geil One S for users reached 290-295Mhz 2,5.3.3.5, 300 2.5-4-3-5, bios 510-3 or 623-3

luigi
10-28-2005, 01:27 PM
funkflix

Ok thx, we will try.
10-28-2005, 05:28 PM
CRF250

hi,

iam the "friend" :P

with bios 510-3 an these settings i have "my" 10x300FSB 1:1

DFI Ultra-D Bios:
2,5-3-7-3-7-14-3-2-2-3-3072-auto-enabled-decrease Skew-255-level7-level2-8,0-normal-5,0-256-disable-16x-7x-disable

so memtest runs from 2,5vdimm to 2,9vdimm with no errors (just 10 loops)
i can boot to windows from 2,5vdimm to 2,9vdimm.

but whatever i do....SuperPi wont finish 1M....not exakt blah blah.
(Prime also stops at a few minutes)

anyone some "tips" ? :(
10-28-2005, 11:36 PM
Zeus

Did you try to raise Vcore?
What is your LDT at?, set it manually to 3 in bios.

Try messing with read preamble/max async latency, this made a difference for me.
What DRAM response time are you using in bios, try to put it one step lower like from "faster" to "fast" or from "fast" to "normal".
10-29-2005, 10:43 AM
CRF250

yep, vcore 1,6v LDT was 4 sure 3 ;)
my cpu runs with 1,44 primestable @ 3000mhz

for testing i used only 9x300 to be sure the cpu is not the problem.
response time i have "normal"....
2,5-4-3-7 and super pi and prime runs :(

how can i become the little "3"
10-29-2005, 11:17 AM
szukalski

@CRF250

Try Drive Strength - 8. Data Strength - 1, Preamble -5.5ns

Maybe even trtw - 2 and remove skew, see if it helps at all.
10-29-2005, 02:07 PM
|SiLA|

Quote:

Originally Posted by CRF250

yep, vcore 1,6v LDT was 4 sure 3 ;)
my cpu runs with 1,44 primestable @ 3000mhz

for testing i used only 9x300 to be sure the cpu is not the problem.
response time i have "normal"....
2,5-4-3-7 and super pi and prime runs :(

how can i become the little "3"

only chosen geil can do the 3..aka geil rep only and prolly 1% or less on retail ;) that's why bachus asked if gigi tried more than the kit he had from geil
10-29-2005, 05:26 PM
MMIQHW

1 Attachment(s)

gigi, i want to have your great rams, now :)
My Geil ONE S 1024MB kit tops out at 308 2,5 4 3 7
Drive strength 7 (guys, test everthing from 5 to 8) / Data strength 1
http://www.xtremesystems.org/forums/...id=39231&stc=1
2,5 3 3 6 is memteststable, but not stable enough for prime or sp.
Using my ocz 4800 platinum kit (TCCD too, no version printed onto the sticker) with the same system 264Mhz 2,5 4 3 7 is the highest stable memoryclock.
Thx Geil.
10-29-2005, 10:37 PM
gigi77

My Friends,

Geil One S is Perfect ram for price and perfomances :)

300 2.5-4-3-5 is normally run for this ram.
10-29-2005, 10:38 PM
gigi77

Quote:

Originally Posted by MMIQHW

gigi, i want to have your great rams, now :)
My Geil ONE S 1024MB kit tops out at 308 2,5 4 3 7
Drive strength 7 (guys, test everthing from 5 to 8) / Data strength 1
http://www.xtremesystems.org/forums/...id=39231&stc=1
2,5 3 3 6 is memteststable, but not stable enough for prime or sp.
Using my ocz 4800 platinum kit (TCCD too, no version printed onto the sticker) with the same system 264Mhz 2,5 4 3 7 is the highest stable memoryclock.
Thx Geil.

set dynamic idle cycle unit DISABLED :)
10-30-2005, 05:31 AM
MMIQHW

Hi gigi, why? Throughput is better with dynamic counter = enabled.
Do you think I could reach 2,5 3 3 6 with dc = disabled? Well, I'll test later.
10-30-2005, 07:57 AM
joe_cool

Here some tests of my Geil One S.

Testconfig. :
Fx-55 SD @ water
DFI-Lanparty nF4 Ultra-D (Bios 623-1)
OCZ Powerstream 600W

300Mhz @ 2,5/3/3/7 @ 2,8V

http://www.forumdeluxx.de/gallery/da...e_300x9_01.gif

305Mhz @ 2,5/3/3/7 @ 2,8V

http://www.forumdeluxx.de/gallery/da...e_305x9_01.gif

My 24/7 settings 295Mhz @ 2,5/3/3/7 @ 2,6V +0,3V

http://www.forumdeluxx.de/gallery/da..._295x10_01.gif

joe_cool ;)
11-03-2005, 04:35 AM
\Karting_freak

joe
can this go higher?

All times are GMT -8. The time now is 06:57 PM.

XtremeSystems