GSkill F1-3200DSU2-1GBFX Debut

Printable View

10-10-2005, 02:46 PM
Onepagebook

GSkill F1-3200DSU2-1GBFX Debut

*************
10-10-2005, 02:53 PM
eva2000

woah PC4800FF just dropped in value if all GBFX can do that ??? what week TCCD ?
10-10-2005, 03:00 PM
Onepagebook

:D:d:D:D
10-10-2005, 03:45 PM
RacerX

Ahh, your killing me. I just ordered 1GBLE thru Newegg tonite.

Pretty impressive results though. How much?
10-10-2005, 04:28 PM
metro.cl

hmmm all ram always oc to good with you opb.

Nice to see new DDR ram, how high can it go 2-2-2-5??
10-10-2005, 04:36 PM
gundamit

How am I suppose to get those in my motherboard if they barely fit into that stadium? :confused:
10-10-2005, 04:48 PM
asianguy80

Quote:

Originally Posted by gundamit

How am I suppose to get those in my motherboard if they barely fit into that stadium? :confused:

lol

nice ram!
10-10-2005, 04:58 PM
Vapor

Quote:

Originally Posted by gundamit

How am I suppose to get those in my motherboard if they barely fit into that stadium? :confused:

Well, compared to the Big House, that's a small stadium, ain't it OPB? :D

Actually, I'm not even sure if the Big House is bigger :confused:

Anyword on how many of these modules will do 300 2.5-3-3-x, OPB?
10-10-2005, 05:26 PM
Onepagebook

Quote:

Originally Posted by Vapor

Well, compared to the Big House, that's a small stadium, ain't it OPB? :D

Actually, I'm not even sure if the Big House is bigger :confused:

Anyword on how many of these modules will do 300 2.5-3-3-x, OPB?

:d:d:D
10-10-2005, 05:27 PM
VoRtAn_MaDgE

Great stuff OPB...

I wonder if GSKILL could make some 2x1024 kits with that oc ability with those settings (the 2GBHZ are making around 270/280 with cas3 1:1)...okay, u you guys are always impressing us but now let's put the limit barrier a little further ;) can this be done?
10-10-2005, 05:28 PM
Vapor

Gotcha ;)

Any word on estimated price yet? These could be THE entry level stuff to get if the price is right :D

VM: I think it's safe to say that all manus are working on getting the most out of 2x1024 kits ;) UCCC *can* do 3-3-3 up at VERY high speeds, but they're rare and 5B -D can do 3-3-3 upto about 310 max and 2.5-2-2 up to like 220 typically....unfortunately no 2x1024 can do what BH or TCCD can do (at least not in the DDR1 realm :D), yet.
10-10-2005, 05:29 PM
Onepagebook

Quote:

Originally Posted by gundamit

How am I suppose to get those in my motherboard if they barely fit into that stadium? :confused:

lol, that's my mouse-pad :toast:
10-10-2005, 05:32 PM
VoRtAn_MaDgE

Quote:

Originally Posted by Onepagebook

lol, that's my mouse-pad :toast:

:owned:
10-10-2005, 06:01 PM
Onepagebook

Quote:

Originally Posted by Vapor

Gotcha ;)

Any word on estimated price yet? These could be THE entry level stuff to get if the price is right :D

VM: I think it's safe to say that all manus are working on getting the most out of 2x1024 kits ;) UCCC *can* do 3-3-3 up at VERY high speeds, but they're rare and 5B -D can do 3-3-3 upto about 310 max and 2.5-2-2 up to like 220 typically....unfortunately no 2x1024 can do what BH or TCCD can do (at least not in the DDR1 realm :D), yet.

************************************************** ***************
10-11-2005, 03:00 AM
Pirated

oh! what a nice mem's. anyone knows how much is the price?
10-11-2005, 03:01 AM
skane

How do they perform on intel chipsets?
10-11-2005, 03:02 AM
VoRtAn_MaDgE

Quote:

Originally Posted by Pirated

oh! what a nice mem's. anyone knows how much is the price?

See post above :)
10-11-2005, 03:05 AM
Vapor

Quote:

Originally Posted by skane

How do they perform on intel chipsets?

Hmmm...it's TCCD so I'd bet not this well :D
10-11-2005, 03:23 AM
Jamo

wow great stuff at a killer price point, any idea when/if this will be availiable in the uk opb?

cheers
10-11-2005, 03:28 AM
Kasparz

WOW, this ram rockz o_0

How far it can go with 2.8-2.9V?
10-11-2005, 04:01 AM
skane

i know that vapor, but gskill says they are also "compatible" with intel chipsets, so i just wordered.
10-11-2005, 04:09 AM
Vapor

It's compatible but it won't thrive.
10-11-2005, 05:12 AM
skane

How much can i expect, right now im running geil ultra platinum with hynix d5 chips that can do about 260 2.5-4-4-x on a p4p800-e and a dothan 740. Will tccd be better, or should i keep these sticks?
10-11-2005, 05:13 AM
\Karting_freak

nice!
10-11-2005, 05:34 AM
Onepagebook

Quote:

Originally Posted by Kasparz

WOW, this ram rockz o_0

How far it can go with 2.8-2.9V?

************************************************** ***
10-11-2005, 09:31 AM
kakaroto

Very nice OPB, you did it again!

Sure this is very nice ram for people who cannot overclock so well.

Very cheap DDR600 ram :D

Mine are doing great too, 300Mhz 2.5-3-3-7 2.82v only 4M stable for now, will test later.

What are your drive/data strengths OPB?
10-11-2005, 10:59 PM
Onepagebook

*************************************
10-12-2005, 01:09 AM
TEDY

thank god prices are falling ;)
10-12-2005, 04:09 AM
865pe

Quote:

Originally Posted by Onepagebook

7/3 is the mst stable setting I choose,
or you might wanna try 8/3 or 8/2

FC or FX good ?
10-12-2005, 06:52 AM
Onepagebook

************************************************** ************
10-17-2005, 02:07 AM
865pe

@Onepagebook :toast: Gskill Fx best TCCD chip only 2.65v 2.5-3-3-5 1T up to DDR 600 :p: http://img151.imageshack.us/img151/3...shot0021le.jpg
10-17-2005, 03:31 AM
ArcTan

wow
these are super tempting considering it's price
11-05-2005, 08:06 PM
i found nemo

151 @ the egg
11-05-2005, 08:10 PM
Mn3monic

wow nice timing... can't wait my FX..
11-06-2005, 04:34 AM
Perc

hey

your one of the g-skills people i asume right? i just bought two packs of this FX series and got to looking at the memory. i noticed that the heat spreaders arent making contact with the chips just a small thin section of tape is used on the outer edge of the chips to hold the heat spreaders on. these heat spreaders are then ment to work or for looks? not sure how the chips can cool if they dont make contact with the heat spreaders. i want to take them off but dont want to kill me warrenty... have you noticed what im talking about? can you take a look at your pair and look for what im talking about? would be intersting to see what you say about this...

thx perc,
11-13-2005, 01:23 AM
einCe

i think its some kind of thermal tape. and mine is making quite good contact
11-13-2005, 04:15 AM
Hydrus

865PE,nice ram man!!! :clap:
[off topic]Which is your max 1:1 with this San Diego?Cause i think that 1.58v doesn't need for 300*9
11-13-2005, 08:19 AM
NickS

Quote:

Originally Posted by Perc

hey

your one of the g-skills people i asume right? i just bought two packs of this FX series and got to looking at the memory. i noticed that the heat spreaders arent making contact with the chips just a small thin section of tape is used on the outer edge of the chips to hold the heat spreaders on. these heat spreaders are then ment to work or for looks? not sure how the chips can cool if they dont make contact with the heat spreaders. i want to take them off but dont want to kill me warrenty... have you noticed what im talking about? can you take a look at your pair and look for what im talking about? would be intersting to see what you say about this...

thx perc,

Squeeze the ram. :stick:
11-13-2005, 02:50 PM
Tibu

Where could I buy this ram?
11-13-2005, 03:27 PM
Arkangyl

http://www.newegg.com/Product/Produc...82E16820231035
11-14-2005, 05:11 PM
Tibu

Since G.skill is using heatspreaders now, does that mean, that the ram gets cooled better with the spreaders rather than without them?

I'm just asking cuz I can't make up y mind between buying a new set of the FX or getting a used set of 1GB LE's... Tough tough choice :confused:
11-25-2005, 08:39 PM
Sky042

I have this ram and so far I couldn't even get it to DDR490 without setting timing at 3-4-4-8 Epox 9NPA+ Ultra.

I must be doing something wrong.
11-25-2005, 09:00 PM
dogsx2

Mb?
11-26-2005, 02:36 AM
Sky042

Quote:

Originally Posted by dogsx2

Mb?

It's on the list of reccomended mobo's for the FX modules.
the complete breakdown of the system is
Opteron 165 CCBWE 0534 SPMW
1GB FX TCCD G.Skil ram kit
Epox 9NPA+ Ultra
Antec TPII 530W
1 x 250GB Maxtor SATA
2 x DVD-r's
Chaintech 6600GT 128MB DDR3 PCI-E card

What I've done tonight is printed out screen shots from this thread and the other one. I'm going to mirror the settings for the ram from these test threads on mine and see if that makes a difference starting at DDR440

See in my mobo I've been adjusting only the 4 settings I knew the standard CL -TRCD-TRP-TRAS And leaving the rest of them set on auto as I frankly don't know what most of them do.
12-18-2005, 08:17 PM
jbmx4life

well I seem to have come to a wall at 300HTT on my system with this ram. I was hoping for atleast 312HTT so that I could do 312*9.
12-19-2005, 08:44 PM
jbmx4life

anyone help?? I can only put 2.6v +.03V to my rams...... any higher it errors bad and any lower can't get stable. I am interested in any/all tips, tricks, or hints ;)

thanks
12-19-2005, 10:55 PM
nop

my FX is on the way. i'd be happy if it could do 300@2.5-3-3 :)
12-21-2005, 08:55 PM
jbmx4life

did everyone just happen to abandon this thread or whut?
12-22-2005, 08:12 PM
Supertim0r

what's the max recommended TCCD voltage ?
I've bought a new gig oc OCZ 4800EE and I won't kill this memory. It's actively cooled, haven't used more than 2.72v @ superpi, will run them @ 300fsb 2.5-4-3-7 2.6v
12-22-2005, 08:40 PM
i found nemo

well just ordered the 2x512 fx kit.... will report when i'm done testin' 'em ;)
12-22-2005, 10:33 PM
nop

hmmm....on th expert mobo i couldn't put it @ 300htt without a zillion of memtest errors. Will try on ulral-d later then
12-23-2005, 05:31 AM
i found nemo

remember, gotta burn 'em in though ( on my utt/ch-5 took me almost a month to get 1.5-2-2-8stable as opposed to 2.5-3-2-9 stable)
12-26-2005, 08:23 PM
i found nemo

Quote:

Originally Posted by Onepagebook

This fx I have no idea how high it can go, but I pretty sure that 's also a budget series ram from Gskill.;)
week, Honestly, I would say 0513 :D

same thing in this review ... funny you should mention that

http://www.sgoverclockers.com/module...t&id=42&page=2
01-04-2006, 09:08 AM
Dark79

Can't find this stuff anywhere :confused:
02-06-2006, 08:02 AM
cdelong

have to buy it "USED".
03-06-2006, 10:31 PM
Mn3monic

mine can hit 300 @ 2.5-4-3-5, 2.72vdimm on DFI Lanparty UT nF4 SLI-DR eXpert... :)
03-07-2006, 06:28 PM
zungkono

@I found nemo : burn-in tccd ? is this possible like utt ch5/bh5 ?
mine can do 290 2.5-3-3-7 1T 2.72v easily(with ultra-d first try was 275), dont try higher yet(I will test it later with expert),
now still searching with geil one-s 309 2.5-4-3-7 1T 2.77v(wont do 2.5-3-3-7, geil tccd 524)
03-08-2006, 10:33 AM
uOpt

Why is the initial post blanked out?
03-08-2006, 11:05 AM
Micutzu

Cause OPB moved to the competition :)
Anyway, the FX series is out of production, i don't think this is so important anymore.
03-08-2006, 11:21 AM
uOpt

Well, competition or not, since the post was made before he defected, I don't see how that invalides his previous findings.

I think XS should maybe be above corporate identity battles in clear cases like these.
04-12-2006, 07:20 PM
zungkono

Quote:

Originally Posted by uOpt

Well, competition or not, since the post was made before he defected, I don't see how that invalides his previous findings.

I think XS should maybe be above corporate identity battles in clear cases like these.

I agree, I hope that competition not make confusing XS member:toast:
04-16-2006, 11:54 AM
i found nemo

i love my fx series :D
04-17-2006, 02:54 PM
hixie

I have just got myself a pair of F1-3200DSU2 512LA. Amazing sticks of RAM, can do DDR600 2.5-4-4-8 at stock voltage with no problem at all (if fact its not even overclocked yet).
How does those sticks compare to mine?
04-17-2006, 04:35 PM
zungkono

Quote:

Originally Posted by hixie

I have just got myself a pair of F1-3200DSU2 512LA. Amazing sticks of RAM, can do DDR600 2.5-4-4-8 at stock voltage with no problem at all (if fact its not even overclocked yet).
How does those sticks compare to mine?

but I think gskill gbfx still the best for price/performance
04-17-2006, 05:06 PM
ozzimark

Quote:

Originally Posted by zungkono

but I think gskill gbfx still the best for price/performance

meh, in reality, anything over $100 per gb isn't good at all for price/performance ;)
04-17-2006, 10:35 PM
hixie

Quote:

Originally Posted by zungkono

but I think gskill gbfx still the best for price/performance

Mine cost $680 (Hong Kong dollars) which is quite cheap :D
04-17-2006, 10:50 PM
zungkono

Quote:

Originally Posted by hixie

Mine cost $680 (Hong Kong dollars) which is quite cheap :D

yes quite cheap compared with gskill LA,LE,FF or Geil One-s :D
mine got 290@2.5-3-3-7 2.7v and 316@2.5-4-3-7 2.8v
04-18-2006, 06:19 PM
lopri

What was the OP's result? I don't see it.

Anyhow, if you haven't gotten your hands on a pair of TCCD, this is the right time since all the manufacturers are trying to dump DDR DIMMs. I myself got a pair of OCZ PC4200 sticks and they do 300MHz @2.5-3-3-6, and past that 2.5-4-3-7. (didn't test how far it'd go) All this at 2.70~2.75V.
04-18-2006, 06:55 PM
lopri

Here are a couple screenshots for your viewing pleasure. It was my first TCCD kit and the things clock like there is no tomorrow, so I thought all TCCDs are like that. Mind you, but the clock itself won't make up for timing-loving K8 CPUs. (sure there is a turning point)

Here are OCZ PC4200 Platinum 1G (512MB x 2) which I just picked up for ~$120 after MIR.

DDR620 @2.5-4-3-7
http://img90.imageshack.us/img90/3305/ddr6207hd.th.png

DDR600 @2.5-3-3-6
http://img90.imageshack.us/img90/65/ddr6003xw.th.png

And for comparison's sake, this shot is from OCZ PC3200 Titanium 1G x 2

DDR500 @2.5-3-2-6
http://img88.imageshack.us/img88/2181/ddr5008bu.th.jpg

The thing is, those TCCD sticks were much easier to deal with. Like I said, all DDR makers are trying to dump their inventory right now so if you've been thinking of them, this is the right time. And until Conroe arrives, do you honestly think DDR2 533/667/800 can make up for the speed shown above? I've seen some reviews here and there (about AM2), but they're comparing DDR400 (2-2-2-5, yeah big deal) with DDR2 800. Don't they know most people already running DDR500~600 speed in their rigs? Why do they turn blind on reality?

Sure DDR2 800 might be comparable to DDR400, but the truth is, nobody runs DDR400 this day and night.

Sorry about off-topic. Dunno how it went that way.. :slapass:

All times are GMT -8. The time now is 08:15 PM.

XtremeSystems