FX-57 WR with my cascade (4096.01MHz and soon 4108MHz)

Hi all

I tested my FX-57 and I could get 4096MHz and possible 4108MHz at 1.87v
there is a protection at 1.92-1.93v

My fx cant boot in DC mode (too bad!!!!!!!!!!!!!!) because there is a missing pin :(

a cpumark 1.0 at 3893MHz, I think to have 3905MHz

513 in SC!!!!!! I didnt believe it :eek:

spi 1M is ok around 3875-3882MHz but the score is bad with one module

http://valid.x86-secret.com/show_oc?id=40258

http://valid.x86-secret.com/cache/40258.png

WR?
http://membres.lycos.fr/cpulloverclo...atique/513.gif

WR?
http://membres.lycos.fr/cpulloverclo...tique/8697.gif

Nice work cpull :) Try resoldering the pin or putting wire in the socket or something? That really sucks about having to run SC... Do all diegos OVP at 1.9V? My 3700+ randomly blackscreens and restarts over 1.9V.

good job cpull

Damn, such an awesome chip and a broken pin :brick:

It looks like sadly, you're not gonna break any Pi records with it if you can't fix it :( Such a shame...

Quote:

---

Originally Posted by afireinside

Nice work cpull :) Try resoldering the pin or putting wire in the socket or something? That really sucks about having to run SC... Do all diegos OVP at 1.9V? My 3700+ randomly blackscreens and restarts over 1.9V.

---

already tried to solder the pin or putting in the socket, doesnt work

so a precision, I cant solder the pin, too hard :D

in DC I would have 21.3 at spi 1M ......................... :stick:

at 1.344v, max 3475MHz

very good job cpull :toast:

would you share some pics of your cascade here ? :)

Nice o/c cpull ;)

AMAZING. Cant wait for a 4100 verification. Would the lost pin have anything to do with such a high overclock? Maybe u should send it here: http://www.motherboardrepair.com/. Couldnt hurt.

Take the chip to a watch repair place, see if they can solder a pin on for you...

Nice OC though :D

Awesome clocks there bro, Keep going.... :toast:

Exelent work there CPULL :)

WOW. simply amazing pcmark score for single channel

:toast: Grats

Good luck on 4.1Ghz

:slobber: :toast:

thx fugger and everybody

new tests tomorrow

Congratulations buddy! :)
Did you try the using a "needle" part in the socket position of the missing pin ?

Wow... Very nice OC!

:toast:
GJ cpull :)

congrats!

congratulations.. Your fx is amazing!!

sexy ^_^

Wow, awesome clocks, nice.
4.1Ghz on AMD :slobber:

4.1 or ban on the net :p

i d like to see with 1150 cascade :banana:

not an official WR of course -->4096MHz (digital camera) but 4.1G is broken by an AMD cpu :)

it's beautiful :p:
http://membres.lycos.fr/cpulloverclo...matique/fx.gif


I want a valid at this frequency!!!!!!

better tomorrow for the 1st pic

http://membres.lycos.fr/cpulloverclo...ique/17663.gif

http://membres.lycos.fr/cpulloverclo...ique/36474.gif

:toast: :toast: :YIPPIE:

Simply amazing dude:exclaim:

thx

at 1.87v it gives -34C in the dfi bios

nice but with ethylene...

You're thinking you can get more? :slobber:

Quote:

---

Originally Posted by Vapor

You're thinking you can get more? :slobber:

---

yep, with R1150 4150MHz and more is possible

my cascade is using R22/R170

Holy :banana::banana::banana::banana: man....good luck with that! Do you think it becoming a SC core has anything to do with it clocking so high? You're leaping over the rest!

I hope to get soon R1150
4G benchable would be nice

Can't wait till you pull a 4Ghz 1M Spi!!Goodluck bro!! :toast: :toast:

In SC Spi suxxx

The only bench he can use are cpumark99/2

n1 man!

4.1G :slobber:

good job :woot:

great, simply great! nice OC-work, but as everyone else here, I want to see an 4G bench ;)!! Go and make it happen!
:toast:

:banana: :banana: :banana: :banana: me , i'm famous....

What a show :clap: :clap: :clap: :clap:

Give me a 4 .... give me a 1 ... give me a 0 ... give another o...

:woot: 4100mhz :woot:

hug'zz

Wow!!! :slobber: 4.1Ghz :eek:
:clap:

WOW !!!
4,1 GHz with fx57 .. i hope you can get more out of this monster

Just wanted to pop in and give my congrats and respect to you :toast: That is a tremendous achievement and hopefully we might see a 4ghz run of something soon :clap:

this thread just gave me the chills, that is simply amazing!!!!!

Just amazing! :toast:

Cogratulations from all the members @Team Japan:toast:

A bit of pity still you cannot work it with DC mode even after you have tried fixing broken pin.

Look forward to seeing 4.1G benchable soon :)

Quote:

---

Originally Posted by PRTeamJapan

Cogratulations from all the members @Team Japan:toast:

A bit of pity still you cannot work it with DC mode even after you have tried fixing broken pin.

Look forward to seeing 4.1G benchable soon :)

---

thx TEAM JAPAN :toast:

my fx-57 is better than yesterday for sandra

I'm in contact to get R1150

with that I hope to bench at 3950MHz


wait&see

:) :p:

http://membres.lycos.fr/cpulloverclo...tique/3867.gif

the best frequency for cpumark
http://membres.lycos.fr/cpulloverclo...tique/3899.gif

http://membres.lycos.fr/cpulloverclo...ique/18016.gif

http://membres.lycos.fr/cpulloverclo...ique/22163.gif

http://membres.lycos.fr/cpulloverclo...ique/37107.gif

awesome ocing..

keep it coming bebeh :toast:

really really nice results, congrats man, keep em coming :D

Quote:

---

Originally Posted by cpulloverclock

I hope to get soon R1150
4G benchable would be nice

---

Good luck man, can't wait :clap:

Congrats Cpulloverclock :toast: .....
Glad to share 500s cpumark 99 with you and OPB....even with really low htt :)

Have to torture the 57, so evap. temp not less than -97C (less and screen literally freezz).... :D

Check the vcore :)

http://img386.imageshack.us/img386/6...shot0264zz.jpg

nice going Dumo!

We're waiting for the 4G benchable cpuoc... ;) :banana:

Quote:

---

Originally Posted by Dumo

Congrats Cpulloverclock :toast: .....
Glad to share 500s cpumark 99 with you and OPB....even with really low htt :)

Have to torture the 57, so evap. temp not less than -97C (less and screen literally freezz).... :D

Check the vcore :)

http://img386.imageshack.us/img386/6...shot0264zz.jpg

---

nice

evapo temp is -85 and I hope -110 with R1150

maybe an improvement of 50-100MHz for some benchs and 50-60+ for a SS

Heres with r1150 and mixed 502/507, evap temp. @-99C and vcore 1.81V...sli driver and all eye candies still enabled....

http://img237.imageshack.us/img237/2...shot0297la.jpg

Very Nice Dumo :)

Quote:

---

Originally Posted by Dumo

Heres with r1150 and mixed 502/507, evap temp. @-99C and vcore 1.81V...sli driver and all eye candies still enabled....

http://img237.imageshack.us/img237/2...shot0297la.jpg

---

at 1.87v with my gas I get -34C = 4108MHz

if I can have -54 with R1150... = XXXXMHz

wow...thts crazy man....best of luck getting that CPU repaired.....whats the system setup and stepping?

Why does your cpu name string say:

Athlon64 Fx-25 processor :stick: :stick: ??

Quote:

---

Originally Posted by El Snorro

Why does your cpu name string say:

Athlon64 Fx-25 processor :stick: :stick: ??

---

bios too old

that's the 310p

what week is that?

very ice both of you guys :toast: pretty nice fx57 any chance of sp1mb?

How did you manage to lose the one specific pin for DC?

Pin-mod gone bad?
Self-mutilation?
Unluckiness?

just seen this. Awesome Cpul :toast: . Suks to have broken pins , i know i have few cpu's with missing pins too. Pin in thew socket usualy worked for me but i gues your case is dif. Anyway congrats on WR