Denny's NEW AMD 32M WR

Printable View

09-15-2005, 09:56 PM
guess2098

Denny's NEW AMD 32M WR

3.840G 32M pass
19M 22.891S

http://premium1.uploadit.org/guess2098/PC/100_3449.JPG

and DI only left this much during Pi's 14 loops
i was worry so much....

http://premium1.uploadit.org/guess2098/PC/100_3443.JPG

New AMD 32M WR ^^

Denny
09-15-2005, 09:57 PM
justwOo

Niceeee stuff!!
What kinda tube?
09-15-2005, 10:00 PM
rick_fx

Incredible!!! :toast:
09-15-2005, 10:00 PM
guess2098

jason's ^^ his DI Container is the BEST ^^
09-15-2005, 10:07 PM
justwOo

I just ordered an alumi mousepot to test out the construction :)

Looking forward to his new revision! :)

Did it hold 221 on Smart Gaurdian the whole run?
09-15-2005, 10:10 PM
dinos22

congrats....that took a lot of balls too with juice running out and all.....this run deserves a commentary :lol2: :lol2:
09-15-2005, 10:11 PM
guess2098

Quote:

Originally Posted by justwOo

I just ordered an alumi mousepot to test out the construction :)

Looking forward to his new revision! :)

Did it hold 221 on Smart Gaurdian the whole run?

it is around 235 with 1.74v during 32M but not real time^^

^^

Quote:

Originally Posted by dinos22

congrats....that took a lot of balls too with juice running out and all.....this run deserves a commentary :lol2: :lol2:

heheheh i was super worry ^^
09-15-2005, 10:14 PM
G H Z

Man this battle in 32mb PI is great! If you can do 3.84Ghz in 32mb 3.9Ghz and over should be cake in 1M. Please try this, I don't think any Team Japan guys got anywhere near this Mhz in 32mb let alone 1M. It might get very close to breaking 21Sec :woot:

Also can you grab an in Windows screen shot next time ;)
09-15-2005, 10:24 PM
guess2098

Quote:

Originally Posted by G H Z

Man this battle in 32mb PI is great! If you can do 3.84Ghz in 32mb 3.9Ghz and over should be cake in 1M. Please try this, I don't think any Team Japan guys got anywhere near this Mhz in 32mb let alone 1M. It might get very close to breaking 21Sec :woot:

Also can you grab an in Windows screen shot next time ;)

^^
i will try 1M at 3.9G next time
and in windows screen shot
09-15-2005, 10:30 PM
twilius_basic

Whoa. Step away from OC'ing for a couple months and whaddaya see?
32M Super Pi @ 3840mhz w/ FX-57 on DI :toast:

Well done.
09-15-2005, 10:37 PM
bachus_anonym

Damn! I knew that OPB's 32M @ 270x14=3782Mhz will be hard to beat, but I wasn't expecting it to be beaten a only 1 day after :lol:

You should really try to go after all PIs: 1M, 8M, 32M and Pifast, too ;) With that chip, you're guaranteed to rule Pi kingdom :up:

Insane benching, Denny! :slobber: Who said that 32M is boring??? :D
09-15-2005, 10:42 PM
eva2000

OPB's record didn't last long hehe

congrats

looks like the 32M race is on :)
09-15-2005, 11:38 PM
mrlobber

It looks like you still have some fsb left if compared to OPB's 32M run (yours is 256, his - 270). Now, to quote bachus_anonym, "this record will be hard to beat" :D
09-15-2005, 11:43 PM
guess2098

i think once OPB uses his Cascada~~ will break into 18M ^^"
09-16-2005, 12:05 AM
G H Z

Maybe, but these chips have a hard time under cascade temps. He might have more MHz but getting the memory to run at speed will most likely be a problem. Mouspot looks perfect for this chip atm.
09-16-2005, 12:09 AM
Dumo

Quote:

Originally Posted by G H Z

Maybe, but these chips have a hard time under cascade temps. He might have more MHz but getting the memory to run at speed will most likely be a problem. Mouspot looks perfect for this chip atm.

Until some pp find a way to trick the -90C cascade...probly a layer of thermal interface in between evap and ihs/core?
If the cooling device stable @ 3.9Ghz load then another WR :toast:
09-16-2005, 12:59 AM
SoF

Quote:

Originally Posted by bachus_anonym

Damn! I knew that OPB's 32M @ 270x14=3782Mhz will be hard to beat, but I wasn't expecting it to be beaten a only 1 day after :lol:

You should really try to go after all PIs: 1M, 8M, 32M and Pifast, too ;) With that chip, you're guaranteed to rule Pi kingdom :up:

Insane benching, Denny! :slobber: Who said that 32M is boring??? :D

i thought exactly the same while seeing this topic the first time - amazing 32m hunt ^^
gogogo for 1m :toast: :woot: :woot:
09-16-2005, 01:38 AM
AndreYang

wow..........good job :woot:
09-16-2005, 01:49 AM
Mrki

Nice VCore for an FX-57 ;)

Very nice run! :D

Mrki
09-16-2005, 02:06 AM
Toki

There's a superpi war on XS :D

Amazing clock for a 32M action, congrats and show us some 3900 1M action :toast:
09-16-2005, 03:15 AM
harleybro

Insane score!! :toast: Is this the original chip you have or testing a new one?
09-16-2005, 03:33 AM
Waus-mod

Wow.. wr's are raining! awesome work m8!
09-16-2005, 09:43 AM
extol1337

wow. nice
09-16-2005, 10:05 AM
guess2098

next week i am going to push and try 3.9G
any idea, tip, and help for me?
I know 2003 runs 32M much faster!
but too lazy to install it^^"

thanks everyone^^
Denny
09-16-2005, 10:10 AM
|SiLA|

well done lovely clocks :toast:
09-16-2005, 10:39 AM
guess2098

Quote:

Originally Posted by Dumo

Until some pp find a way to trick the -90C cascade...probly a layer of thermal interface in between evap and ihs/core?
If the cooling device stable @ 3.9Ghz load then another WR :toast:

i am always wonder that what is the full load temp on cascada
idel and full load temp difference only 15C on DI
09-16-2005, 11:06 AM
guess2098

MickeyMouse
could u tell me where can get the black thing that cover outside of the mousepot?
mine is totally damaged............
09-16-2005, 11:23 AM
NickS

NICE Score man. That's friggin FAST. Go for FOUR GHZ!!!! :slobber:

Even a suicide shot wld be well worth it.

Quote:

Originally Posted by MickeyMouse

ADDING A TIM MEANS A GREATER TEMP CHANGE

It doesnt matter if you can get your -100c cascade to -84c with a interface material the temps will go from -84c to like -60c where as the real cascade might do -100c to -90c.

adding a Interface material or more mass to get the temp's to warm up adds mass the block has to cool which cant cool directly as the gas is tuned for the mass of the block.

Its a lost hope!!
you want as much mass possible but at the same time you want the flow of liquid to be equal to that to cool your evap/container efficantly so temps swing is as close to nothing as possible.

even with 3 stage -140c cascades the evap will limit the overclock becasue of the mass of the evap can only hold temps at a set level from swinging becasue of thermal dynamics :)

So your saying, don't use thermal paste when using phase change? :confused:
09-16-2005, 12:58 PM
bachus_anonym

Denny,

Can you do me a huge favor and run 16M next time you have a chance to bench that beast around 3.8Ghz, please? I've been waiting very long time to see 9:00 in 16M on AMD and this might be that one chance :) Thanks a ton, man :up:
09-16-2005, 02:51 PM
dinos22

Quote:

Originally Posted by bachus_anonym

Denny,

Can you do me a huge favor and run 16M next time you have a chance to bench that beast around 3.8Ghz, please? I've been waiting very long time to see 9:00 in 16M on AMD and this might be that one chance :) Thanks a ton, man :up:

you would have done it with your rig if you had BH5 in there with that 10m run don't you think
09-16-2005, 03:03 PM
Dynasty

Very nice 32M with 57. congrats on WR.
More and more DI + 57's around here, nice competition. :)
09-16-2005, 03:07 PM
s7e9h3n

Quote:

Originally Posted by MickeyMouse

ADDING A TIM MEANS A GREATER TEMP CHANGE

It doesnt matter if you can get your -100c cascade to -84c with a interface material the temps will go from -84c to like -60c where as the real cascade might do -100c to -90c.

adding a Interface material or more mass to get the temp's to warm up adds mass the block has to cool which cant cool directly as the gas is tuned for the mass of the block.

Its a lost hope!!
you want as much mass possible but at the same time you want the flow of liquid to be equal to that to cool your evap/container efficantly so temps swing is as close to nothing as possible.

even with 3 stage -140c cascades the evap will limit the overclock becasue of the mass of the evap can only hold temps at a set level from swinging becasue of thermal dynamics :)

Question: If you add, say, a copper mass between the evap and the IHS, wouldn't the larger mass of the cooling head be able to maintain a better load temp (at the cost of lower temps of course)? I agree that using a thinner/smaller contact area with the cooling head will utilize the freon/DI with more effeciency, but wouldn't a larger mass translate to less of a swing in loaded temps?

EDIT: Forgot to add - THAT'S ONE HELLUVA 32M RUN...wow 3840 :toast:
09-16-2005, 03:16 PM
AndreYang

Quote:

Originally Posted by MickeyMouse

lol, I feel like I need to let YOU. OPB, and Harley try the new revision of the mousepot in 3 weeks or so for free after all this madness :)

Wow imagine 32m @3.9ghz, hehe with just dryice and acetone :)

Congrat's you guys are tearing it up!!!

Don't forget me. :D

I can 3.7G 32M IHS on it.If remove :D
09-16-2005, 06:59 PM
guess2098

Quote:

Originally Posted by AndreYang

Don't forget me. :D

I can 3.7G 32M IHS on it.If remove :D

take it off^^ join with us
09-17-2005, 12:57 AM
Dumo

2 Attachment(s)

Guess, here is my evap. temp(-84.7C) and core on bios(-27C).....I put a dry film (aluminium) thermal interface....
I still try to get -30ish core temp. so its mem. controller hopefully can run @ higher htt...
What is your temps ay that run?
09-17-2005, 01:06 AM
SoF

Quote:

Originally Posted by MickeyMouse

ADDING A TIM MEANS A GREATER TEMP CHANGE

It doesnt matter if you can get your -100c cascade to -84c with a interface material the temps will go from -84c to like -60c where as the real cascade might do -100c to -90c.

adding a Interface material or more mass to get the temp's to warm up adds mass the block has to cool which cant cool directly as the gas is tuned for the mass of the block.

Its a lost hope!!
you want as much mass possible but at the same time you want the flow of liquid to be equal to that to cool your evap/container efficantly so temps swing is as close to nothing as possible.

even with 3 stage -140c cascades the evap will limit the overclock becasue of the mass of the evap can only hold temps at a set level from swinging becasue of thermal dynamics :)

i think you are totally right.
any mass reduces core temperatures imo...if there is -40°C left because of the layers between die and evap there is no need for cascades anymore - just use a weaker cooling unit e.g. single stage ^^
this way you will just try what's the lowest temp the unit will work properly.
my 3200+ winchester was unstable @-45°C and lowering the pressure, getting temps up to -30°C didn't help...back to air ~40°C 2750MHZ @1.61V no problem - damned cold bug :slapass:
09-17-2005, 01:12 AM
guess2098

Quote:

Originally Posted by Dumo

Guess, here is my evap. temp(-84.7C) and core on bios(-27C).....I put a dry film (aluminium) thermal interface....
I still try to get -30ish core temp. so its mem. controller hopefully can run @ higher htt...
What is your temps ay that run?

my temp @ bios reads -33C @ 1.74v
and -45C @ 1.5v ^^
09-17-2005, 02:52 AM
TheMeatFrog

All I can say is...WOW :clap: As Jason said, these 32M WRs being broken left and right is for sure madness :D
09-17-2005, 11:25 AM
Zeus

Poor OPB, his record didn't last long.
I'm sure he'll be back with an answer.

Congrats on an amazing record, enjoy it. :toast:
09-17-2005, 07:38 PM
s7e9h3n

Hey Denny,
I was curious what timings you were running on your memory. Got an A64 Tweaker shot? ;) The timings must have been insanely tight :toast:
09-17-2005, 09:18 PM
psy^

I'd love to see what 3Dmark05 results you get with SLi 7800GTX's :slobber:

Is it 3D stable?
09-18-2005, 04:10 AM
SlackeR

Nice one Guess ;)
yo're on a roll, man :toast:
09-18-2005, 04:53 AM
sponge bob

Quote:

Originally Posted by psy^

I'd love to see what 3Dmark05 results you get with SLi 7800GTX's :slobber:

Is it 3D stable?

imho if it compleats Spii32m then it will run 05 very easly.
09-18-2005, 10:06 PM
Punisher!

Awesome man! :D
09-20-2005, 10:51 AM
z24

nice run congrate on the WR

but i think OPB got answer to haha........
09-20-2005, 08:01 PM
guess2098

Quote:

Originally Posted by z24

nice run congrate on the WR

but i think OPB got answer to haha........

hehehe good for him

i want to earning more money...

might not do overclock anymore ^^
09-20-2005, 09:27 PM
G H Z

I'll bet you want more money after going thru 10 or so 57's ;)

@ Dumo, my BIOS temp is -26° under Baker Single stage, 3668mhz PI 1M stable.
09-20-2005, 10:06 PM
guess2098

Quote:

Originally Posted by G H Z

I'll bet you want more money after going thru 10 or so 57's ;)

@ Dumo, my BIOS temp is -26° under Baker Single stage, 3668mhz PI 1M stable.

hehehee actually i sold most of them
still wanna save more money, my wife wanna buy a house....
but i wanna buy a lot of CPU........... lolz

what is ur volt @ -26C?
my 57 pass 32m at 3840 but can't do 3850 1M XD

All times are GMT -8. The time now is 05:54 AM.

XtremeSystems