Printable View
I just received the Sempron 2600+ 64 bit - revision E6 from distributor in VietNam and interrest with it :p:
System :
DFI LP UT 250Gb (bios NF3LD504)
Sempron 2600+ BOX, 1600Mhz, 128KB cache L2 (SD2600AIO2BX - code 0527)
Gskill PC 4400 2*256 (TCCD - 431 )
WaterBlock DangerDen TDX
With vcore 1.55
2.64Ghz@330*8 : stable 3h20m
2.7Ghz@338*8 :
- SuperPI 1M : 33.297s
- SuperPI 32M : 28m 33.234s
Sempron is good for small budget :D
lol 128k of cache hehe it still performs prett good tho
________
How To Make A Vaporizer
d2ol stable at 2.7ghz?
I have a 2800 @ 2400 (got it finally) air cooling 8*300 with a half divider (horrible mem). These chips are really good overclockers.
I would also like to hear the answer to this question.Quote:
Originally Posted by Korpse
pretty darn good for such a budget chip though its rather crippled by the 128kb cache
Damn...celeron gets its butt kicked...again :(
Perhaps intel needs Celerons with HT to counter this :p
Perkam
Quote:
Originally Posted by Korpse
Still testting, stable 2.7G with vcore 1,62V :)
I'll post a screenshot tonight :D
sweet!
have to remember for us D2OLers, that eve D2OL isnt 100% stable even if youre PC is Prime stable, well thats the case for me :confused:, system primestable at 2.64ghz, d2ol stable MAX at 2.6ghz
wait... VIetnam has amd cpu's??? holy crap... I am goiing there on sunday...OMG if I see some.. they would cost like 2 bucks american... I am gonna buy everything! :P
and If I find some FX chips.... WOW :P
d2ol or fold stable at 2.7ghz 24/7? :toast:Quote:
Originally Posted by iMAX
I think not sure!
Why not ? , i make sure that folding is not stress than prime95 , even my CPU fail prime at 2.5Ghz in a minute , i can fold 24/7 :rolleyes:Quote:
Originally Posted by thienloi
However , prime just stable at 2.3Ghz :slapass:
Yep , but the price in Vietnam is also higher than in US :slap:Quote:
Originally Posted by AzN_plyR
Quote:
Originally Posted by Korpse
Quote:
Originally Posted by thienloi
I'm sorry, I'm wrong, It not stable d2ol :(
Try testing with prime.
I don't think so! :nono:Quote:
Originally Posted by xs64
The sempron is just a office processor with little cache, just like the celeron but it only clocks better.
xyus
I wouldnt really compare the sempron to the celeron....the celeron is usually 1 step back from the P4 as now the P4s are 800bus and the celerons are 533bus and they also lack the cache...Semprons just lack the cache and thats all thats stopping them from becoming A64's plus the cache isnt a huge deal as it already has the memory controller and the latency is so low anyway..
:ROTF: You're killin meh :p:Quote:
Originally Posted by perkam
it's higher? :(Quote:
Originally Posted by xs64
right ! i'm Vienamese but now i'm living in Germany , so i know all about Vietnam ;)Quote:
Originally Posted by AzN_plyR
At least u must pay more 20 - 30$ for a 3000+ chip in Vietnam :slapass:
@ iMAX : keep that baby coming , i wanna see it @ 2.7Ghz stable :slap:
Anyone tried out a socket 754 nf4 board yet ? All these DFI NF3 250's are good and all ..... but i'd really like to see someone test out on a more HTT friendly chipset. Me thinks that these chips have much much more in them.
Damn I must get me one of those... my non-64 bit 2600+ only clocks to 2.3ghz stable
Quote:
Originally Posted by UCmajewski
The DFI NF3 LP UT is HTT friendly. I don't know what you mean exactly when saying "HTT friendly", but over 350MHz HTT for example is no problem with most DFI LP NF3 boards.
Anyway, I'm still with you. ATM, I'm waiting for the new DFI NF4X-AL board (well or another Nforce4-4X chipset based Socket754 board to accompany my Oakville CPUs).
Quote:
Originally Posted by xs64
Yes sir, here for you :D
@2.7G : stable 6h10m, vcore 1.68V fullload 1.72V
Quote:
Originally Posted by iMAX
Very nice... :explode2:
:D Nice clock :toast:Quote:
Originally Posted by iMAX
I will tell my father buying one to replace his old school AXP 1800+ :D
Can I help you? :toast:Quote:
Originally Posted by xs64
For amd's most low end chip, a 1.1ghz oc is very nice.
hey xs64, I'm Vietnamese too...:)
So it cost more then in say the US? I may just get one, I still have some family members over there that could get me some if its dirt cheap...to bad.
Anyways, nice oc
not really... My paris outbenched a 3.8GHz p4.........Quote:
Originally Posted by Xyus89
technology is usually more expensive in forgein poorer countries. At least, that's how it is in south america.Quote:
Originally Posted by Sz1hart
just got my 754 sempron w/ x86-64 and SSE3
SDA3300AIO2BX
LBBWE 0526APBW
testing will come soon
There are two versions of sempy 2600s on newegg... spend the 9 bucks and get the one with 64bit and sse3
but these semprons are basically single-channel venice cores with less cache so results aren't so suprising imho.Quote:
Originally Posted by Squid_Spit
Yesterday i recieved my 2500+ which is 64 bit with E6 core.I updated my BIOS on the Asus K8N-E-Deluxe to 1010.After doing so,system is running perfectly fine but i dont see the Vcore option anywhere.Where did it go ? any solutions ?
Although i managed 2.1GHz on it, i am sure it is capable of much more but interestingly my board dumps as soon as i go past 305 HTT,i have kept HTT multiplier on 2x.
i think that asus board you have can't change voltage. i don't know if its sempron related or not. my friend had the same issue.
If CPU not support C'n'Q ,Asus K8N can't change voltage.
sweet man! thx for sharing your results! :toast:
can you post some 64bit results?
Hi.
I maybe getting the 2800+ one.. Anywayz, is it a Paris or Palermo? Its Palermo right? Cuz 90nm..? They are also Single Channels only right?
Updates: It is also 64Bit one right?Quote:
Originally Posted by EazTerence
64bit ones should have amd64 label on packaging.
all s754 cpu's are single-channel.
there are only 3100+ and 3000+ 130nm semprons, i doubt you'll find any of those these days.
I order 3000+ and G.skill value ZX from newegg.I post benchs later
newegg ships to bulgaria?
Quote:
Originally Posted by saaya
Yes sir,
Sys :
DFI NF3-250
Sempy 2600+ @2.72Ghz
Gskill PC4400 LE/431 @302, 2.5-4-3-7, 1T
AIW X800SE mod 16 pipelines @450/850
some benches with a lot of screenshot
3DMark :
3DMark 01 : 25889
3DMark 03 : 11618
3DMark 05 : 5454
Sissoftsandra :
CPU Arithmetic Dhrystone ALU : 11478
RAM bandwidth Buff'd : 4688/4689 MB/s
Memory everest :
Memory read : 4708 MB/s
Memory write : 1885 MB/s
Memory latency : 37ns
Cool man ! Cool System and cool overclock :toast:
nice :up:
couple of questions:
whats the stepping? :)
what are the max (stable) clocks at 1.4v and 1.5v?
CPU everest :
CPU Queen : 2443
CPU PhotoWorxx : 11094
CPU Zlib : 13829 KB/s
Thank man :D , how are you?Quote:
Originally Posted by Zanr Zij
Have y got new CPU yet?
please wait a minute :p:Quote:
Originally Posted by high5
Stepping code LBBWE 0527 UPEW
Good result man
I am Vietnamese too.
@AzNPnyR: AMD Athlon 64 3000+ venice will cost u $170 in Vietnam lol
Hehe i saw this post in the front page XS :DQuote:
64bit Sempron results posted
Posted by: saaya on Saturday, August 13, 2005 - 03:43 AM
Our member iMax from Vietnam managed to get a 64bit Sempron and reached an overclock of over 1Ghz! He got his 2600+ (1.6ghz 128kb L2 cache) to 2.7Ghz despite the very low multiplier most likely limiting his overclock. not bad for a 60$ cpu!
for more details check out his thread here
on my 3000+ sempron that i used to own (not sse3 or 64-bit enabled) i could not hit anything above 2.37ghz prime stable :( that din't stop me from forcing 2.47 ghz on it though he he he
NopeQuote:
Originally Posted by high5
then how do you mean you ordered from newegg?
someone from us will send you?
My new Sempron arrived together with some TCCD twinmos Ram.
Still waiting for the DFI board to arrive.
Its a
SDA2800AI03BX
LBBWE 0526APBW
Z721899F53199
batch :stick: 3199
I don,t realy believe in batch codes, but 3199 is very high :(
feel free to share your results when mobo arrives. :D