What do u think about this? http://www.vr-zone.com/?i=2463&s=1
Printable View
What do u think about this? http://www.vr-zone.com/?i=2463&s=1
is it just me or does it look like the suction line/evaps were put in with photoshop?
also i like how they list cpu speed in GB instead of GHz and claim to have a gpu that runs at 3000MHz.
Tripple evap single stage at -35C per evap full load: highly doubtful :stick:
I think they are saying that the cpu was running at 3ghz when temps were takin. I don't think they are saying that gpu was running at 3ghz.
To me the temps sound quite remarkable for the grand load that one compressor is carrying. If it was'nt VR-zone I totally wouldn't believe it. If someone like Lardy gave it a run and told me this, I would believe it. But untill then, I'm skeptical. :rolleyes:
Heh I'm still skeptical meself Runny :D
I talked to the nice guy who heads the company the last time at compoutex, he was talkin bout usin R404 with 1/3 to 1/2hp for the triple e..... kinda hard for me to belive it holds load for 3 parts, totalling like 400w, and -30+c....
did they have any physical units or is it just talk at this point?Quote:
Originally Posted by LardArse
if these guys can get a tripple evap -30C system with a 1/3hp compressor on 404... i guess everyone else who's ever tried it was just unlucky :rolleyes:
ok more details.
Whatcha think? credible??
I think that guy sucks at photoshop...those heads are faaaake
But its kinda dumb to fake it if you';re eventually gonna sell them right?
I'm excited if they can mass produce a decent DI/LN2 container.
those have been around for ages with so many good variants, its the sli coolers that are more interestingQuote:
Originally Posted by vapb400
i think the filter drier is completely horizontal in that picture... :stick:
yea now that u mention it.... could use a lil tilt i suppose...
http://www.3dspeed.com.tw/CoolerExpr...lerExpress.htm
Looks like my LS unit on the bench...
If its on the up and up, XS should be able to get one for a review ?!
Fugger that linky doesnt work.
Hopefully XS has better luck than VR-Zone, we can only get a discount for review units :)Quote:
Originally Posted by Major
Black Knight, Welcome to XS!
Click the link a few times, it will work.
yea the SLI coolers are very interesting.Quote:
Originally Posted by LardArse
Has anybody mass produced DI tubes? with the exception of Chilly?...that are readily available?
There are so many guys around building dice tubes, you just have to ask and they make you one (not for free ofcourse :p: )
I think.. the price is overwhelming.. >_<
http://www.vr-zone.com.sg/Shamino/cex/cx13.gif
110v / 220v
4.8A / 2.4A
528W !!!
wow too high don't u think ?
The triple head may be fake.
I never see a flex connector that can hold an evap right in the air like that.
with isolation and the copper weight, I guess the head is around 0.5 kg or more.
In denmark we are very sceptical to.
But if its true, I will move to a country that haves cheep power or geet a windmill for my self :D
does anybody recognise which compressor this is?
http://www.vr-zone.com.sg/Shamino/cex/cx1.gif
it's a danfoss, just cant read what the label says...
But the compressor sure doesn't look that big, so -30 with three evaps with full load might be a bit optimistic.
I believe it's a 1/2 hp ;)
i think label reads Danfoss SC15G / 7550, but SC15G is R134A MBP compressor and label 7550 is not found in danfoss compressors
Yes, i was wondering the same thing...Quote:
Originally Posted by t800
i saw it was a sc15g. but what does 7550 mean?
7550 is probably the 'Code no.' as you can see in this link:
danfoss datasheet