is good week ? how with oc ? write here your oc results
Printable View
is good week ? how with oc ? write here your oc results
My 3200+ Week 21 maxed out at 2.6GHZ.
I got mine up to 2.9 at 1.65v
Pokey, how stable was it? 2.9 doesn't help us out much unless you tell us how stable it was. Same for JDizzle i suppose, 2.6 stable or not?
well 2.9 not that stable, but 2.8@1.5v and 2.7@1.45v rock stable 24hrs of Prime on each, 2.9 fails at 1hrQuote:
Originally Posted by Absolute_0
so it looks it quite good stepping i think - i have just ordered them and i think 2.6 its minimum
bump.
anymore results (preferably with air)? i have the chance to get a 0521CPMW but one result on water doesn't give me a very good idea of 21s in general...
I see a lot of members with 3000's instead of 3200's, is this because you can just pick one up a little cheaper to play with? Only thing that worries me is the low multi.
there are no physical differences between 3200 and 3000. the only difference is the higher multi option, but most likely you'll be lowering the multi anyway.
I was at my local CUSA trying to run down this FW deal and saw a pair of the 3000+ LBBLE 0521BPPW CPUs. Anyone have this stepping and week?
My 3200+ is stable at 2.6GHZ, my CPU would have to really pathetic to not be able to get 2.6 stable.Quote:
Originally Posted by Absolute_0
JDizzle - do you know the code after the week? :)
I just purchased an LBBLE 0521APBW (I figure can't go wrong for $115 total).
Anyone with this? Feedback?
I don't have my MB back yet. When I do, I'll post some results... I hope this is not a dog CPU
Looks like a good stepping and code. Nice Price Where are you getting it from?
It was on sale at ewiz.com : http://www.ewiz.com/detail.php?name=A64-3000BP
It's $118.95 now -- seems to change daily.
I got one from E-Wiz on Tuesday that was a week 24. When did you order yours?
I ordered mine on July 10th. Wow. You received a week 24 already. They must be selling pretty well then.
at 115$ i can see why ;)
I think the only probable way to get the vintage week 17 is to check out a bunch of local retailers that DON'T go through large volumes of processors, so smaller places would be better.
May as well add my results, all at stock volts and cooling.
Will update when I get better HSF not going to push more volt with the POS AMD HSF.
LBBLE 0521APMW
http://home.swiftdsl.com.au/~apollo1...20copy_001.jpg
Well, everyone's week 21 results gives me some hope for mine :D
Actually, I figure that as long as I can get at least 2.4 Ghz (1:1,1T & decent ram timings) , then the rest is pure gravy :banana:
I just build my cousin a 3000+ Venice platform and I couldn't believe how cool it ran. I hooked it up with a stock 3500+ clawhammer cooler and it ran at 34 degrees under full load. I managed to bump it to 2.2 ghz oh air and default voltage, I am sure i could have pushed it more but my cousin got scared and didn't let me do it cause he thought the pc would blow up. The 3000+ Venice is a very nice chip.
Yeah, when I do system builds for others, I tend not to OC it (usually just tweak the RAM and optimize the system best I can). Depending on who it's for that is ;) If they have some knowledge on what's going on, I'll bump up the frequency to a safe level. And looks like 2.2 should be safe in this case.
I was scared at one point when I turned on the PC and the CPU fan was not on, so I shut it down and turned it on again and the same thing happened and it would only turn on again after windows was loaded. It was in fact the Qfan option from his Asus mobo that was controlling the fan, which once windows was booted and all applications running, the CPU fan would still only work at 900rpm with 34 degrees idle :D
Are we going to open ever week a new thread? Why can't we just post in the Venice steppings topic?
maybe because it's not updated, and full to the brim of useless off topic post like yours.Quote:
Originally Posted by Vassili
Strange how I got a week 24 when I ordered on the 8th. :confused:Quote:
Originally Posted by hansbroken
Thats exactly the type of smart arrs answers you can get from most posts @ OCAU, if you only have belittling returns that only really show your own ignorance then next time just shut your gob :nono:Quote:
Originally Posted by bugeyes
THE worst way to raise your post count :rolleyes:
Regarding week 17's being great, there were some crappy week 17's too :) , the way I see it is the week 20's and 21's seem good too and maybe other later weeks which we will learn about in time
No wounder you were banned at OCAU ...You should take your own advice, then your rep over @ OCAU might improve!
I will not make any further comment as I don't like going OF TOPIC !!!!
I hate to be the weenie here, but maybe take this to PMs?
I am really interested in how the new weeks are clocking so I can decide on a chip. Useless posts like these turn people off and eventually kill the thread.
/rant 0
So, anyone else? How's the 0521s and 0524s looking? ewiz has my attention. My trigger finger is getting itchy to order..... ;)
The more later weeks that ppl buy the more feedback so go for it as IMHO you have a better chance of getting a good chip than bad :)
Athlon64 Venice3000+0521DPMW(300*9) Stock cooler
DFI Lanparty NF4 ULtra D Stock chipset cooling
Geil Value PC3200*2(Hynix DT-D43/D5) not cooling
WD Raptor 36G+Seagate 7200.7 80G not cooling
6600(325/600@475/680-400/670)Zalman VF700-AlCu
ENERMAX 301P-ve(300W)
Feel so Good
166 1T 2.5-3-5-3-7-12-1-2-1-2-4708(or3702)-1
-DBI En-DQS Increase-128(0/32/64....cool?)-Level4(nomal)
-Level3(15%reduction)-8ns-5ns-16clks-DC en-16x-7x-Disable=>Gold Memory 4Passed
<img src=http://f19.woorihard.com/cgi-bin/ln.cgi?p1=MTC9w7CjLmpwZw==&p2=V0gwMDAzNDYxOA==&p3= L7i1xanG+rT1Lw==>
<img src=http://f19.woorihard.com/cgi-bin/ln.cgi?p1=MjjDyi5qcGc=&p2=V0gwMDAzNDYxOA==&p3=L7i1 xanG+rT1Lw==>
<img src=http://f19.woorihard.com/cgi-bin/ln.cgi?p1=Mi44LmpwZw==&p2=V0gwMDAzNDYxOA==&p3=L7i1 xanG+rT1Lw==>
I know what you mean.Quote:
Originally Posted by alpha0ne
One user here has an 3200+ 0517 BPDW which managed to reach 2.8Ghz without going too far beyond stock volts. I got hold of a 3200+ with the same week and stepping codes and it needed 1.6v to get 2.6Ghz stable and wouldn't go much further.
Luckily I managed to sell it on for very little loss and then got hold of a nice clocking 3000+ instead :)
3000+ 0521DPMW 2.7~2.9G MAX3.0G Air Cooling Prime Endure
There excellent results with the stock cooler :clap:Quote:
Originally Posted by jhjm40
6600 400/335+_+(TSOP MemoryT.T)
ADA3000DAA4BP
LBBLE 0521DPMW
Z711456E50827
3000+0521DPMW 2.7~2.9 Max 3.0G(over?)Air cooling(1.4~1.55v)
average2.8~2.9G+@over Prime Endure
how do you guys get your voltages so low? im at 1.6 with a 3000+ 0521 cpdw, and i cant get over 290x9 at 1.6v. i know its not my memory, it has to be the cpu, because memory is stable up to 240.
ummm not to go off topic but is bugeyes avatar.....naked? is that allowed?
Hush you. Maybe if it is allowed someone will make one with the ATI mascott. :P
To be honest, Im sure at least one of the admins will take exception to it (in the interest of the children) and make him change it. But the majority probably figure that an image that would be pg-13 with real people involving low-res animation isn't disasterously damaging. If I were a betting man however, I'd wager it will be changed soon enough, since I've been asked to change avatars that were nothing more than slightly "suggestive" on similar forums to this.
:off: but anyone who would take exception to a semi naked tiny rendered avater has got some serious problems that need proff. help sooner rather than later :slapass: :rolleyes: