23/6 dothan and x800 on dice

Alz 85 his dothan 730 1.6Ghz is going under dice tomorrow.
I made a container to cool it nicely subzero, pics below.
The results that Alz allready got was 2880 superpi stable and 25.5 seconds on 1M superpi.
note that roomtemp was 32° and he was using a waterchiller that cools down the water of the cpu to 4-5 ° cpu stressed was around 20°

The motherboard thats going to be used it an P4C800 Dlx rev 1.03 and a dothan adaptor.
board is fully modded with vdroop mod, vcore mod, kyosen vdimm mod and bios is flashed with the 1021.003 version.

X800pro @ Xt is fully vmodded but its not the best out there.
540mhz core @ 1.5 Vcore
570 mhz memory @ 2.10 Vdd en 2.25 Vddq.
this was on air, we hope he will fly with dice.

http://www.xtremesystems.org/forums/...id=32897&stc=1

Dry ice result:
superpi:

http://img260.echo.cx/img260/8301/23s7xg.jpg

aquamark:compare

http://j0rt.zattevrienden.be/jort/do...i-DSC06082.JPG




here are couple pics of the container where going to use :D

http://users.telenet.be/jortcollijn/...ainer/pic2.JPG

http://users.telenet.be/jortcollijn/...ainer/pic3.JPG

http://users.telenet.be/jortcollijn/...r/holddown.JPG

http://users.telenet.be/jortcollijn/.../container.JPG

http://users.telenet.be/jortcollijn/...ainer_base.JPG

http://users.telenet.be/jortcollijn/..._installed.JPG

How tall is that container? :eek:

40 centimeters = 15.7480315 inch

its going to be cut to 25 cm because alz asked it:)

For the record, this cpu is superpi 1M stable at 2.8 GHz and 1.55v on boxed cooling with "decent" weather.
32°C roomtemp really kills the overclock.

I'm excited. GL guys ;)

jort from hu is the x800pro @ xtpe
u or alz
mijn dos 575mhz core on air non mod but it not a vivo :( and 615mhz on mem

good luck and hope u wil brake a record

il read it vrijday whate happend im gonne damn :(

Cant wait for the runs. Hopefully 3300 benchable for SPI. Try pifast also. Always remember to let everything have a good burn in for max clocks. Maybe if u burn your me in more, 265 or so is possible 2-2-2-5.

x800 is from kristos

mine died during external powersupply @ ati arg:@

we got very good mem.

Jort & Alzy good luck tomorow , waiting 4 results :)

tnx, kristos will be there too :D

Quote:

---

Originally Posted by moddolicous

Cant wait for the runs. Hopefully 3300 benchable for SPI. Try pifast also. Always remember to let everything have a good burn in for max clocks. Maybe if u burn your me in more, 265 or so is possible 2-2-2-5.

---

I think 3.15 GHz would be more realistic (which is almost a 100% overclock).
One stick is unable to run RAS precharge 2 for some odd reason.
They did well over 280 MHz 1.5-2-3-4 on A64.

cpu container is cut @ 25cm insulated so ready to go.
gpu container is ready to be insulated and nb waterblock +50W pelt is ready within 15 min.
i call it a GO.

let the calculations begin :D

http://users.telenet.be/jortcollijn/...er_covered.JPG

http://users.telenet.be/jortcollijn/...for_Action.JPG

:slobber: :toast:

Have fun guys :toast:
2880 is very good for 32c ambient and those volts. Your chip will go far I bet.
Good luck.

omg it realy sucks that i cant make it tomorrow

stupid school :slap:

ohh master of dothan and x850
w'll do our best ;)

yeah be ashamed :p:

northbridge gets hot so needs cooling to, this is my old nb blok that was strapped on my Msi 865G neo 2.

it sure keeps the chip cool.

http://upload.pio.be/pics/714/nbblock2.jpg


http://www.xtremesystems.org/forums/...id=32929&stc=1

:woot:

jort can i ask you how big is the baseplate of the vga container???

half the belgium people here on one and the same tread :d

are you gonna chill the mem aswell?

Quote:

---

Originally Posted by Troman

yes indeed it's for the belgians to own the whole xs forums :woot:

---

||||||||||||||||||||]||||||||||
||||||||||||||||||||]||||||||||
||||||||||||||||||||]||||||||||
||||||||||||||||||||]||||||||||
||||||||||||||||||||]||||||||||
||||||||||||||||||||]||||||||||
||||||||||||||||||||]||||||||||
||||||||||||||||||||]||||||||||
||||||||||||||||||||]||||||||||

ok ive gon to far, punch me

well anyways, good luck for your concor of xs and with your project

as a belgian, I to feel the urge to post here :D


Good luck on you're runs tomorrow, keep the belgian flag high! :toast:

hope i can come and kick some ass with my gskill le and corsair xms bh-5 :d

Some updates ?

que pasa?
sounds intressting where's the action?

in five minutes we will know the truth :woot:

cant wait

K HERE WE GO

this is the dry ice we got, 20 kg of pellets:

http://j0rt.zattevrienden.be/jort/do...i-DSC05993.JPG

now some random pics taken during the run:) i'll comment if info is needed with pics.

http://j0rt.zattevrienden.be/jort/do...i-DSC05994.JPG

board with mods:

http://j0rt.zattevrienden.be/jort/do...i-DSC05996.JPG

max temp dry ice:

http://j0rt.zattevrienden.be/jort/do...i-DSC05997.JPG

the adaptor with dothan cpu:

http://j0rt.zattevrienden.be/jort/do...i-DSC05998.JPG

adaptor installed and covered with grease(vasiline):

http://j0rt.zattevrienden.be/jort/do...i-DSC05999.JPG

shot of thermal grease dothan core:

http://j0rt.zattevrienden.be/jort/do...i-DSC06000.JPG

container installed with mounting of alz his waterblock, i tell you its VERY easy to use:

http://j0rt.zattevrienden.be/jort/do...i-DSC06001.JPG

first the best card offcourse, its an TNT2 used to be a very good card :D

http://j0rt.zattevrienden.be/jort/do...i-DSC06002.JPG

setup installed:

http://j0rt.zattevrienden.be/jort/do...i-DSC06003.JPG

http://j0rt.zattevrienden.be/jort/do...i-DSC06011.JPG

http://j0rt.zattevrienden.be/jort/do...i-DSC06013.JPG

http://j0rt.zattevrienden.be/jort/do...i-DSC06015.JPG

container with dry ice;)

http://j0rt.zattevrienden.be/jort/do...i-DSC06016.JPG

3160 mhz superpi run, result is 23.766 :woot:

http://img260.echo.cx/img260/8301/23s7xg.jpg

http://j0rt.zattevrienden.be/jort/do...i-DSC06032.JPG

http://j0rt.zattevrienden.be/jort/do...i-DSC06031.JPG


left = base | right = direct into container(watch this screen again a bit lower)

http://j0rt.zattevrienden.be/jort/do...i-DSC06034.JPG

temps realy stay within 1° !!! (this isn't the screen i mean)

http://j0rt.zattevrienden.be/jort/do...i-DSC06026.JPG

LOOK after 5 hours later the temps got to -66 on this screen and -65 on boot and -64 stressed. so the thermal grease settled and got 4° better :banana:

http://j0rt.zattevrienden.be/jort/do...i-DSC06052.JPG

then we throwed an R9700 pro into the game, purpose to brake mister roadster world record(allready took 1 record of him with 3000+ spaw:D)

http://j0rt.zattevrienden.be/jort/do...i-DSC06045.JPG

http://j0rt.zattevrienden.be/jort/do...i-DSC06046.JPG

but the card wouldn't boot:( (now kristos arrived by now so we plugged into the x800 and explore his max speeds on air back,
when is installed the zalman aircooler back onto the R9700 i saw that the 4 pins connector whas not installed propperly "damn alz" :stick:guess its for next time.


removed the box with dry ice of the tabel couse its was getting wet underneath, yeah its cold allright :D

http://j0rt.zattevrienden.be/jort/do...i-DSC06048.JPG

alz is trying to get his hands frosted or trying to be cool :p

http://j0rt.zattevrienden.be/jort/do...i-DSC06051.JPG

keep the container topped :)

http://j0rt.zattevrienden.be/jort/do...i-DSC06054.JPG

rig with aircooled X800xtpe

http://j0rt.zattevrienden.be/jort/do...i-DSC06060.JPG

offcourse with overclocking you get thins like BLUEscreen ^^

http://j0rt.zattevrienden.be/jort/do...i-DSC06056.JPG

and some complaining about drivers not installed :p

http://j0rt.zattevrienden.be/jort/do...i-DSC06057.JPG

silent air cooling:

http://j0rt.zattevrienden.be/jort/do...i-DSC06062.JPG

now we tried to do some aquamark score's and yes the yes yes yes NO whas there:) but we got 100K afterall YEAH

http://j0rt.zattevrienden.be/jort/do...i-DSC06067.JPG

17K raw cpu dothan power!!! don't think these where the gfx settings but 3117mhz dothan was always used while benching:)

http://j0rt.zattevrienden.be/jort/do...i-DSC06070.JPG

offcourse we did some 3dmark 2k1 and got till 38800 but then something stranged was happening, wile oc'ing the card to 642 610 and ran 2k1 the clocks where reset to 549 without a reason because everything was stable:(

http://j0rt.zattevrienden.be/jort/do...i-DSC06071.JPG

ohhh -64 :slobber:

http://j0rt.zattevrienden.be/jort/do...i-DSC06075.JPG

-52 @ 644 mhz:D

http://j0rt.zattevrienden.be/jort/do...i-DSC06083.JPG


we got 100K, 101K, 102K, 103K, 104K and finaly 105K! after lots of runs and reboots:)
compare

http://j0rt.zattevrienden.be/jort/do...i-DSC06082.JPG

then offcourse this happend too:slap:

http://j0rt.zattevrienden.be/jort/do...i-DSC06086.JPG

zalman bracket, container, silan wrap kept the card running:

http://j0rt.zattevrienden.be/jort/do...i-DSC06087.JPG

Disassambling of the system:)

no air no condensation had any chance here:

http://j0rt.zattevrienden.be/jort/do...i-DSC06088.JPG

http://j0rt.zattevrienden.be/jort/do...i-DSC06089.JPG

after 9 hours of running dry ice almost no condensation has formed

http://j0rt.zattevrienden.be/jort/do...i-DSC06090.JPG

little sweat on backsite but who wouldn't sweat with these conditions

http://j0rt.zattevrienden.be/jort/do...i-DSC06094.JPG

PERFECT contact and NO condensating

http://j0rt.zattevrienden.be/jort/do...i-DSC06095.JPG

alz has some job with removing the grease:D

http://j0rt.zattevrienden.be/jort/do...i-DSC06096.JPG

http://j0rt.zattevrienden.be/jort/do...i-DSC06097.JPG

the drip was from the container:)

http://j0rt.zattevrienden.be/jort/do...i-DSC06098.JPG

alz realy did some SUPERB insulating job!!!

http://j0rt.zattevrienden.be/jort/do...i-DSC06099.JPG

and some FINE soldering work, this is realy good

http://j0rt.zattevrienden.be/jort/do...i-DSC06100.JPG

http://j0rt.zattevrienden.be/jort/do...i-DSC06101.JPG

This was a superb succes, nothing died everything was running like it should.
K the x800 could be better but there is a big change that next week alz can use his ex x800pro xtpe back to use, it did 675 675 on water and fully vmodded offcourse:) so 725 or 750 wouldn't be that hard on that one.

I like to thank to browse to all the pic and thanks colin and kristos and me to be a perfect team :)

till the next time;)

over and out,

Jort

nice work, nice pics!!!

GREAT JOB!!!

tnx, like to keep the community up to date with loads of pics:D

we learned again big time from this run :)

next run i'll do with another friend is X2 4200+ and dry ice,FX-57 on dice. gfx not known yet:)

Jort, don't forget i used only a waterchiller for 3405Mhz with SPAW :p:
Good luck for the nexts runs. ;)

Very nice runs Jort :toast: Lookin forward to seeing how the X2 and FX-57 do. :)

Great job! Nice days work!

Great job guys, congrats :toast:

Great pics man, those are classic with the magic bean pellets. Also reminds me to grease up my mobo when I put the cascade on it.

Yeah very nice pics of how to properly insulate a dothan under dice :)

only 3100mhz... :( i expected 3300 from dry ice!

you expect too mutch then :p:
3300 mhz is capable but not with dice:)
so where going to meat again with some liquid stuff:D

well, i have seen 3100-3200 with phase change(single stage not cascade...) and i expected something like 3200-3300 with dry ice!

kingpin on ln²and its a 760, alz has an 730
=>http://pic8.picturetrail.com/VOL256/...6/96933517.jpg

just have to be lucky with the cpu :)

next time if u need my x800pro u call me ;) .
nice scores i hope u du more benching tis summer :banana:

x800 is ok.

I had some probs with it yesterday: I had tearing in games and stripes at boot up and in windows.
my voltmeter displayed insane core voltage and major fluctuations. even when I turned down the VR completely it still was at 1.6V but my meter was also low battery so I placed the card in the oven for a couple of hours and replaced the battery in the meter and everything is fine now :) :woot:

Great pics. Very well done.

Nice... did you run 3dmark 05 ? :slobber:

No, we didn't have any time left and it wouldn't be such a good score because the x800 didn't clocked that high.

just wait till beginning next week, alz85 is going to do another run with his ex-x800xtpe that did 675 675 on water and memsinks

Impressive.

Man, you guys deserve this credit! That mounting was amazing, not to mention running it for 9 hours straight without any major problems (i.e. things dying, bsods and resets don't count :))

Congratulations, extremely well documented, I enjoyed viewing this :)

Good luck taking Misterroadster down :D

:toast:

ah btw there is an article comming from this run :)

Very well done guys!

This is XS at its best :D

Truly extreme, no puny little XP120's or water cooling :wasntme:

Quote:

---

Originally Posted by Jort

No, we didn't have any time left and it wouldn't be such a good score because the x800 didn't clocked that high.

just wait till beginning next week, alz85 is going to do another run with his ex-x800xtpe that did 675 675 on water and memsinks

---

You forgot we wanted to but the .exe was corrupted so we couldn't install it ^^

that was a fun read Jort. Nice pics and nice job on the benches guys. :toast:

BTW-- My 760 maxed out around 3150 or so on DI..... and here is where it maxed out on ln2:

So you should expect at least 300mhz more from your chip on the liquidz, if not 400mhz :)

whate was the highest clocks that kristos card dit ?
il be waiting :banana:

Quote:

---

Originally Posted by blind_ripper

whate was the highest clocks that kristos card dit ?
il be waiting :banana:

---

642/610 iirc

nice going Jort, Colin and Kristos

hup belgium hup :banana:

Quote:

---

Originally Posted by kristos

You forgot we wanted to but the .exe was corrupted so we couldn't install it ^^

---

but still we had not enough time to run it :D

tnx kingin for the compliment,we try again this summer:)

As blind_ripper pointed out to us, we are apparently nr1 aquamark3 in the x800 class :toast:

in despite of my sucky x800... :slapass:


http://arc.aquamark3.com/arc/arc_sea...ype=AMScoreCPU

http://arc.aquamark3.com/arc/arc_com...unID=490375362

eta of dothan on dry ice article is sunday, check the news then ;)

Nice job. Lots of pics. R u going to try LN2, or is that not going to happen? I'd love to see your dothan @ 3400 or 3500.

Jort, as always nice going :D hope to see much more

this shows again that belguim overclockers just 0wn :p: :p:

@kristos: is your x800 that bad?

and congrats to the belguim oc team :D

Xyus

X800 is bad idd:)

tnx for compliments, w'll try again this vacation

Sick job man. GREAT insulation!

So when will be the ln2 bench? :)

patience waus:) prolly next month, august:)

http://www.madshrimps.be/gotoartik.php?articID=342

its there;)