630 @ 4702 box aircooled

I love 6xx series :D

http://img285.echo.cx/img285/6152/sc...02valid4nt.png

Cpu-Z Validation

AA8XE bios 22
512Mo DDR2 PC5400 HyperX 1:1 3.4.3.6
6600GT
Antec 550W Full modded

Vcore : 1.71V
With box heatsink and fan, room temp @ 21°C

Will try under a single stage tomorrow :cool:

:woot:

what ya said your paypal address was and how much did we settle on that cpu ?!

:slobber: :slobber: :slobber:
WOW X 300^27 there ! :toast:

:D

Be fore selling it, I HAVE TO put it under my single stage, then under dual stage, then under LN2, this baby wants 5.5 or more :d

Where is the results, Superpi?

no benchies for the moment, i'm still on an old windows install, I have to back up my datas, then install a windows 64 :)

Man I would love to get one of those..... What's the production date and what plant is it from? Maybe it's time to go hunting for one of it's brothers...... :p:

China

SL7Z9
3504A924

Pack Date : 03/16/05

:)

Got any pics of the setup when on air?

I'll put them online this afternoon :)

:up:

here's what it looks like : http://img264.echo.cx/img264/4968/rig0wa.jpg

Quote:

---

Originally Posted by Tyrou

China

SL7Z9
3504A924

Pack Date : 03/16/05

:)

---

Thanks. That overclock is just plain crazy :clap:

My single stage has some issues that prevent me from using it right now, but since i fix it, i'll put him on the 630, otherwise, it will be dual stage only :D

Clean setup you got there...

You sure have the cooling to push the cpu even more.

What is it super pi 1mb and 3d stable at?

Great CPU there Tyrou, hope you achive those 5.5+ Ghz your are looking for.

Why singlechannel?

Are you after a 100% overclock :D:D:D

go for it.

That is one nice OC, my 630 won't even do 4,2 no matter what settings i use, somehow i believe my 875P-T is holding it back

this is the first China 6XX i've seen
all i've got at work is Costa Rica...
:toast: nice clock !

what would be the best China or Costa Rica ??
And what would be the best "stepping" for a 630 ?

And what is the CPU temp ?
Is that HyperX DDR2?

This is HyperX 5400, on single channel...cause I only have one stick at home, my other one at a friend's who needed some ddr2 for the week :D

I can boot windows @ 4500, I didn't try more, but i will :)

My single stage still doesn't work, my compressor seems dead :(

Quote:

---

Originally Posted by kappa2001

Are you after a 100% overclock :D:D:D

go for it.

---

Ive got a cpu here that can achieve a 100% overclock with a cascade or a good single stage maybe.

I'd love to see a 100% o/c, and I'll try with LN2, but chances are not so huge... :/

Give it your best shot ;)

My cpu is a 2.66 1mb 533 scottie that wants some cold action ;)

I already have the dewar flask, and the cpu evap for LN2, I may give it a try next week :)

but before, i want to check if the cpu loves xtrem coldness :D

Awesome CPU :slobber:

Tomorrow, I'll replace the single stage's compressor by a 7/8HP one, I hope it will be OK to play with -40c by tomorrow evening :D

I think that if it can reach 4.7 on aircooling, it will probably max between 5.1 and 5.4 with the single stage, that would be damn cool :slobber:
Next to come is dual stage, which reaches -80c, with a bit of luck, 5.5 would get broken before the week ends :D

Quote:

---

Originally Posted by Tyrou

Tomorrow, I'll replace the single stage's compressor by a 7/8HP one, I hope it will be OK to play with -40c by tomorrow evening :D

I think that if it can reach 4.7 on aircooling, it will probably max between 5.1 and 5.4 with the single stage, that would be damn cool :slobber:
Next to come is dual stage, which reaches -80c, with a bit of luck, 5.5 would get broken before the week ends :D

---

oh.. screw single stage.. just stick'er under the cascade :D you know tahts all we wanna see! :)

If i have time enough, I'll give it a try today, if not, it will be tomorrow :D

nice, is good!

I installed the dualstage in my room yesterday, so i'll be ready for a bench session today I hope :D

Hi!

Nice chip you got there!
We would love to see some benches soon :D

Its been a while since a REALLY xtreme Intel OC has been done...4.7ghz on air is something that WOULD make a stock FX cower in fear :O .

very VeRy VERY Nice.

Perkam

Agree with Perkam, its impressive to see Intel OC again after some time :) Venice and new San Diego chips have been hogging the spot light for some time now :D

Truly impressive, can say nothing else than that :) I think 100% OC is very possible with this chip of yours. Now only to get some of those nice 5400UL sticks and fire it up with LN2 :D

:toast:

Quote:

---

Originally Posted by Juliette

Agree with Perkam, its impressive to see Intel OC again after some time :) Venice and new San Diego chips have been hogging the spot light for some time now :D

Truly impressive, can say nothing else than that :) I think 100% OC is very possible with this chip of yours. Now only to get some of those nice 5400UL sticks and fire it up with LN2 :D

:toast:

---

We have seen some (extreme) oc's of pentium-m then ;)

Cool!! Too bad I have a P4 5 series, or else I could perform that Dell mod!1

Here's some results of my current o/c session, with my brand new dual evap single stage, I only have -30c loaded on each evap, so nothing better than -20c on my cpu, if everything runs ok, I'll try LN2 next week...

http://img113.echo.cx/img113/2339/screen5400bios4pv.jpg

http://img168.echo.cx/img168/9127/sc...60verif9hv.png

Very impressive. Is that just screenshot stable, or benchable stable?

I don't even know :D I just take that shot a few minutes ago ;)

I spent all the week making and troubleshooting my single stage, so I still have my old crappy windows, and to bench, it's a PITA :(

I have to reinstall, I may do it tomorrow :)

a bit more...

http://img295.echo.cx/img295/6369/sc...20verif9gi.png

Congrats Tyrou :banana: :banana: :clap: :clap:

Push it more .. you can do it :explode2: