3000+ Venice: 3194MHz Pifast || Budget ocing!

Printable View

05-23-2005, 05:28 AM
Epsilon

3000+ Venice: 3419MHZ @ phase-change

Done on custom phase-change :)

http://valid.x86-secret.com/show_oc?id=19647

http://members.home.nl/epsilon/19647.png

http://members.home.nl/epsilon/temp/...3194_3836s.JPG

On this single stage home made phase change :)
http://members.home.nl/epsilon/phase...hmarking03.jpg

Score on boxed air:
http://members.home.nl/epsilon/temp/...2845_4239s.JPG

max screenshot : around 3300mhz, will post tomorrow.

Need a new install, the NF4 drivers arent installed yet, only NF3 drivers. Will gain another 0.4sec or something :)

Other specs:

- DFI NF4 Ultra-D
- 2x256MB Mushkin old bh-5 (level2)
- PCP&C 510w sli psu
- 120GB WD 7200RPM (like it matters)
- FX5200 PCI
05-23-2005, 05:49 AM
Micutzu

Very nice! What was the evap temp at CPU idle ?
05-23-2005, 05:53 AM
Mahoney

Nice oc epsilon.! :toast:

What about the week and stepp??
05-23-2005, 06:34 AM
Toki

Awesome result :toast:

And yeah, we want to know step and week :D
05-23-2005, 01:09 PM
Epsilon

Quote:

Originally Posted by Micutzu

Very nice! What was the evap temp at CPU idle ?

The evap temp (on the block) varied from -48c to -38 (depending on speed and voltage) :D.

That's in the very bottom of the block, so infact the CPU temp. -22c in bios btw ;).

Stepping:

CBBLE 0512 DPBW
xxxx0217

:)
05-23-2005, 01:14 PM
Keelz

awesome result :D
05-23-2005, 07:56 PM
Jort

budgetoverclocking is cool :banana:

is just like the winnie's but these are even better :woot:
05-23-2005, 08:09 PM
mion

nice, what are your temps
05-23-2005, 10:21 PM
Epsilon

Maybe I will suicide shot today :)

Temps in the bottom of the evap vary from -48c idle @ 2800mhz 1.4v to -38c idle @ 3194 1.7v. Loaded the temps rise to -30c in the bottom of the evap block.

The sensor is here:
http://members.home.nl/epsilon/phasechange_2/evap09.jpg

And not on the suction as the Mach2 GT etc. The loaded temps at 3194/1.7v are -42c on the suction line :)
05-25-2005, 09:07 AM
Epsilon

And a suicide screenshot @ 3419mhz

http://valid.x86-secret.com/show_oc?id=19647

http://members.home.nl/epsilon/19647.png
05-25-2005, 10:04 AM
don_vercetti

quality graphics card! That is PCI i take it? What is it?

Very good speeds btw, maybe a bit of burn in will help it go even higher? How long have you had it for?
05-25-2005, 11:23 AM
Epsilon

It is brand new, this is after just 5hours of running both air and phase-change :)

It is FX5200 128MB PCI videocard
I use it for CPU benches because it practically doesn't take power so CPU has all :)
05-25-2005, 11:33 AM
don_vercetti

well a bit or burn in probably won't hurt then, i know it's physically incorrect at all, but it does seem to work, loads of people have noticed it.
05-26-2005, 09:26 AM
Epsilon

just wait and the CPU will go faster probably :D
05-29-2005, 10:48 PM
Epsilon

CPU will be sold

THis is the final result:
http://members.home.nl/epsilon/temp/...3194_3750s.jpg :)
06-05-2005, 12:49 PM
piotres

Wow ! Nice score Epsilon :toast: ...

Please write more informations about Phase-change- what compressor, what gas :rolleyes: ???

peter
06-05-2005, 01:05 PM
NiCKE^

Isnt that a WR? If it's post it in the WR thread.
06-05-2005, 01:11 PM
V4n{}u|sH

Great job and great CPU :toast:
06-05-2005, 01:20 PM
cpulloverclock

nice

which step?

I receive my 0517 DPMW wednesday :)

coolaler can bench at 3.41G with his 3000+
06-05-2005, 05:42 PM
Shadowmage

lol, phase change isn't budget OCing :(

GJ tho :)
06-05-2005, 05:45 PM
HiJon89

Quote:

Originally Posted by Shadowmage

lol, phase change isn't budget OCing :(

GJ tho :)

Its "custom phase-change" which means the whole thing probably didn't cost more than $500, not exactly budget, but not exactly the high price you think of for phase change cooling
06-05-2005, 06:23 PM
[XC] moddolicous

Nice scores. I think with some tweaking and a little higher OC, 36sec in PIfast would have been possible.
06-06-2005, 05:50 AM
Epsilon

maybe it was possible, but I have to lap my evap first, contact wasn't 100%.

The thread of my cooling systems is over @ teampuss

Here is the thread:
http://www.teampuss.com/forums/viewtopic.php?t=605

But, because you have to register to view, I will post some specs here :)

It's a 14cc 1/2hp R404a compressor
runs with 3meter 0.031" captube
Propane as refridgerant
and chilly1 evap :)

idle @ -57c
Loaded with 180w @ -42c on the suction line (were prommy's are meassured)
-30c in the very bottom of the block @ load.
06-06-2005, 06:05 AM
404Power

HOLY SH*T! :slobber: :banana:
I don't know what to say.....

AWESOME RESULTS Epsilon! :D :D
06-07-2005, 08:04 AM
Zyklon5

Nice setup you got there ! congrats ! How did your Venice do on air maybe with a better week you could go higher.
06-09-2005, 05:07 PM
Codeine

Very impressive, you had some damn nice timings too. Selling that just after a hand full of hours, damn. I'd like to see what you can pull off on SLI with your coolng system.