4000+Claw @ 3505 WR

Printable View

05-15-2005, 05:46 PM
harleybro

4000+Claw @ 3505 WR

Well after seeing my WR was beaten did a little work tonight. :) Started running Super Pi and had got below 26 @ 3300 last weekend today was too many problems. Tweaked my bios so swapped mobos. Found the other mobo not ocing as well so swapped bios chips. Finally had to stop when I saw the condensation dripping off my card to a place on my mobo that wasn't painted.
3469

http://valid.x86-secret.com/cache/18086.png
05-15-2005, 06:39 PM
S&M

congrats ! great results ! :toast: :toast:
05-16-2005, 05:24 AM
harleybro

Thanks anyone know what kind of gain I might see removing my ihs?
05-16-2005, 05:54 AM
saaya

awesome! :toast:

whats the highest speed you can do 3d or other benches at?
and what exactly was the difference between your mobos? how did one of them overclock higher?
more stable vcore?
more stable high fsb?

congrats on the world record! :toast:
gonna post it on the front page :D

oh and can you post some pics of the setup? dry ice or ln2? :D
05-16-2005, 06:07 AM
saaya

congrats, youve got the world record for a 4000+ and are on rank #20 of the highest a64 overclocks worldwide! :D
05-16-2005, 06:10 AM
Jasonhk

Quote:

Originally Posted by saaya

congrats, youve got the world record for a 4000+ and are on rank #20 of the highest a64 overclocks worldwide! :D

where do you see the highest amd64 clocks worldwide..cause we (me and neosteve) got 3424Mhz on a 4000+

and yea what cooling?
05-16-2005, 06:29 AM
harleybro

DI on CPU and GPU. I might have more pics on my cam at home w/ the gpu container also. Here's when I was still running the GPU on chilled water. I have to thank Jason57 since he built the cpu container. I may shoot for 3500 this weekend. ;) The highest I have run a 3d bench was @ 3325. It may have not been the mobo at all just the bios issue. I was just having lots of problems dialing my ram in again. Last weekend had it running great @ 277x12 with a 180 divider and my VX @ 1,2,2,6.
http://img237.echo.cx/img237/6169/picture0028ra.th.jpg
http://img63.echo.cx/img63/630/picture0049gg.th.jpg

Here ya go Jasonhk: vr-zone
05-16-2005, 06:36 AM
Jasonhk

Thanks Nice Pics.

Thanks one mother of a Dry Ice tube..ours is tiny :(
05-16-2005, 07:10 AM
MeTsU

harleybro.....THAT'S SOME INSANE STUFF BRO! Well done!!!!!!
I've been following this...and I wish I could only do things like what you've done...and have the balls to use DI.

I'll hopefully do it sometime :)

BTW, YGPM.

Well done again harleybro!!! :banana:
05-16-2005, 08:35 AM
Cornelious0_0

Very nice m8....keep goin', and I'll keep my fingers crossed for ya hitting 3500 some time soon.

Always nice to see new WR's coming and going, lets not stop now, secure that lead. :)
05-16-2005, 09:08 AM
perry_78

Nice Harleybro, I see some nice points in 01SE with yout state of the art GFX :D
05-16-2005, 10:06 AM
saaya

i think you missed the link he posted jasonhk :D

http://www.vr-zone.com/ocdb/

you should submit your results to their oc database as well :)
05-16-2005, 01:09 PM
harleybro

Thanks all. :) Just got home and checked the cooler still got more DI left. May throw my state of the art graphics card in and try to push it again. Not alot of DI left but hopefully enough for a few runs. ;)

Quote:

Originally Posted by Juliette

Nice Harleybro, I see some nice points in 01SE with yout state of the art GFX :D

Yeah think I could do good in 01 with that card lol. But I'll stay with H2O at first.

Edit: BTW 3500 done :)

3505

http://valid.x86-secret.com/ccpuz.php?id=18215
05-16-2005, 03:23 PM
harleybro

Anyway to change the title of my thread? :)
05-16-2005, 04:49 PM
vapb400

what voltage was that at?
05-16-2005, 04:59 PM
[XC] moddolicous

Quote:

Originally Posted by harleybro

Anyway to change the title of my thread? :)

PM a moderator, he can change the title. As far as your results, :slobber: :slobber: :slobber: . Those are amazing
05-16-2005, 05:03 PM
harleybro

Was at board max lol. 1.55 136% showed as 2.02 originally in cpu-z Thanks about the mod will do worked on Super Pi a little.
http://img16.echo.cx/img16/4374/257572km.th.jpg
05-16-2005, 06:43 PM
5-Clicks

:eek2: :eek2: :eek2: :eek2: :eek2:
:clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap:

very very nice! lets just pray that what happened to OPB doesn't happen to you too...!
05-16-2005, 07:07 PM
THunDA

harleybro.. great work dude.. keep it up.. :)
05-16-2005, 07:18 PM
Onepagebook

yup!!:DThis one is definitely not easy!!
Congrats!!
05-16-2005, 07:23 PM
conrad.maranan

Quote:

Originally Posted by harleybro

Anyway to change the title of my thread? :)

Done. Let me know if you'd rather have it another way. ;)
05-16-2005, 08:03 PM
petervandamned

Nice Job

Work to be done for my little friend ;)
3385 on a my Mach GT.

Vr-zone
http://www.vr-zone.com/ocdb/amd_screenshots/514i.x-png

Do you have any pics of that DI container?
I am thinking of testing DI now :)
05-17-2005, 02:35 AM
harleybro

Thanks all. No pics of the tube itself. It's very plain I believe 3" or close to 3" diameter and about 10" tall on a 3/8' base. Maybe snap a photo tonight and shoot it over. :)
05-17-2005, 02:59 AM
Bennah

Impressive clocks with your 4000+, great work :toast:
05-17-2005, 05:57 AM
GoThr3k

if you still wonna go higher try some ln2
doesnt cost much and cools your cpu to -170 or so
05-17-2005, 06:13 AM
GoThr3k

Quote:

Originally Posted by Troman

-196° ;)

in theory, you processor wil never get to -196, a good container wil bring you to -180° or lower, but -196 isnt possible onder load, not even idle
05-17-2005, 07:06 AM
harleybro

Quote:

Originally Posted by GoThr3k

if you still wonna go higher try some ln2
doesnt cost much and cools your cpu to -170 or so

Yup I have been checking into it. I can get it the same place I get my DI. The only problem is a container. I can rent a 180L for $30 a month but it's way too large. I am working on setting up an account to rent a smaller container. Probably won't be doing it for at least another month or so. :)
05-18-2005, 01:03 PM
5-Clicks

do you happen to remember the codes (all) on your CPU?
05-18-2005, 01:38 PM
harleybro

Here ya go:
ADA4000DEP5AS
CAA2C 0449SPMW
1160433L40151

Also as a side note the DI container used in these runs may be going up in the for sale forums shortly. :)
05-18-2005, 07:08 PM
5-Clicks

thanks doc :)

:eek: oooo...i'm tempted to just PM you right now! tempted.........
05-18-2005, 07:33 PM
Jasonhk

Quote:

Originally Posted by harleybro

Here ya go:
ADA4000DEP5AS
CAA2C 0449SPMW
1160433L40151

Also as a side note the DI container used in these runs may be going up in the for sale forums shortly. :)

You planning another Dry Ice container? :rolleyes:
05-19-2005, 01:56 AM
harleybro

Quote:

Originally Posted by Jasonhk

You planning another Dry Ice container? :rolleyes:

The person I had purchased the one I have now from has a new design being made now. ;)
05-19-2005, 03:23 AM
Jasonhk

Quote:

Originally Posted by harleybro

The person I had purchased the one I have now from has a new design being made now. ;)

Whats the specs? Your current one looks like it holds load very well as it is. :D
05-19-2005, 03:46 AM
harleybro

Quote:

Originally Posted by Jasonhk

Whats the specs? Your current one looks like it holds load very well as it is. :D

The one I have does. The new one will have more contact surface area and was told it will hold colder temps. I haven't even seen pics yet lol but trust it will be a good one. I am currently looking into a UEI DT200 temp. meter so I can actually see what temps. I have. If I get one by this weekend I'll be able to post temps. on my current set-up. :) Also checking more into getting LN2 on Saturday. If all goes well I might be able to get and run LN2 the following weekend.
05-19-2005, 03:54 AM
Jasonhk

Also got access to LN2 here, but gonna if we are going to try it yet..sometime soon though :D
05-19-2005, 05:41 AM
gloatlizard

the di container seems really well built,congratz 4 da wr
05-20-2005, 07:20 AM
Xyus89

WoW ! nice temps!

good core + good cooling ;)
how much do you reach on air?

btw first impression of your Dry ice container is very good :)
nice and compact.

xyus
05-20-2005, 07:47 AM
harleybro

Thanks I got the UEI DT200 today so this weekend I can get temps. on DI. As for air I believe I bench around 2.8. Water I have done 2.9. Tonight I'll be benching on chilled water so I'll see what that'll do. ;)
05-20-2005, 07:50 AM
Xyus89

cool!!

very good that you can tell us your results on nearly (phase change) all the cooling solutions!!

Xyus
05-21-2005, 12:29 AM
gubben

Next wekend i gone try my DfI on DI, I was planing to go over 3500mhz!!
But you was first CONGRATS :toast: :toast:
My best with +4000 Msi K8N Neo2 3450.
05-21-2005, 10:20 AM
petervandamned

time to beat this :)

http://valid.x86-secret.com/show_oc?id=18978

been playing to short with this
but not bad for a first time
05-21-2005, 06:13 PM
harleybro

Was pushin for 3530 but couldn't get it stable. Pulled the IHS off took it up to 3100 @ stock voltages but am having problems w/ high clocks. I'll give it a go again tomorrow. But congrats :toast: on holding the new record. :)
05-21-2005, 07:07 PM
petervandamned

I had this mem doing 300 mhz but in very last moment during validation the system crashed :( Then i run out of time and ice :(
wil do a next run later this week must have that 3600 mhz screen :D and compair this with my new sandy 4000 :)

All times are GMT -8. The time now is 03:45 PM.

XtremeSystems