Printable View
now i've made a good cpu container i am going for the gfx offcourse :rolleyes:
http://users.telenet.be/jortcollijn/..._container.JPG
http://users.telenet.be/jortcollijn/...lmost_done.JPG
i am still working on it so i'll post pics asap.
waiting for my 5m tube of 2" 1/8 and other stuff :toast:
edit: don't look to dimensions, the tube is cutted several times so the actual length is going to be exact height of my cpu container.
so i've got a nice looking rig :D
Looks wicked !
Should do nicely :)
leaktest it yet? that connection looks kinda dodgy in the pictures...
What card are you putting that on? Report back here with results ASAP.
many cards, x800xt's 6800gt's(sli)
and its beta!
its not tight at ALL.
just testing my friend;)
where going for wr of 2k05 and other too;)
i'll make a post tonight of what where going to do here in belgium @ 5 april.
i give a hint, 50 kg dry ice ,5cpu and 6 gpu containers, fx55 and maybe ln².
where going for the top of the orb ;)
here is the one thats going to be used for the WR attempt.
the tube is now shorter, is same height as the cpu containers( 40cm)
http://users.telenet.be/jortcollijn/...ainer_done.JPG
http://users.telenet.be/jortcollijn/..._side_done.JPG
http://users.telenet.be/jortcollijn/..._installed.JPG
;)
nice going so far.
Is that gpu cooler going to just stand on there or are u going to have somthing supporting it?
yo jort thats not gone fit with SLI ;) i think.
i know, today i'll make on for SLI ;)
i've got a system for it, atleast for my system :DQuote:
Originally Posted by BigPanda
just use a cord around the cpu and gfx container and you set
http://users.telenet.be/jortcollijn/...x/bracket3.JPG
we used it with the previous dry ice run and it worked like a charm
fixed the beta container and made a fully operational gfx container of it
http://users.telenet.be/jortcollijn/...iner2_done.JPG
http://users.telenet.be/jortcollijn/..._side_done.JPG
i'll tell you my secret of working that fast.
last week i found a way to heat it up a bit so i don't have to heat it up with my torch( oxigen lasts 30min @ full power)
http://users.telenet.be/jortcollijn/...zing_setup.JPG
http://users.telenet.be/jortcollijn/...ing_setup2.JPG
have a nice day, i'll keep on comming those containers :banana: :banana: :banana:
jo jort is there gone be a second party tis year
prolly yes;)
if this one is a succes we can look for further sponsers because this is not without money organizing such a event
and a sli gfx container is going to be made too
http://users.telenet.be/jortcollijn/...icontainer.JPG
http://users.telenet.be/jortcollijn/...ainer_side.JPG
happy clocking;)
its like a baseballbat :p:Quote:
Originally Posted by Jort
lol, exactly what I was thinking. :)Quote:
Originally Posted by Revage
you not the only one^^
Quote:
Originally posted by jmke
bottom one looks like a baseball bat:)
update of the Sli containers:)
drilled the base of the Sli container, the other one is the same
http://users.telenet.be/jortcollijn/...se_surface.JPG
brazing
http://users.telenet.be/jortcollijn/...the_copper.JPG
4 holes need to be drilled
http://users.telenet.be/jortcollijn/...e/Sli_base.JPG
brazed
http://users.telenet.be/jortcollijn/...ner_brazed.JPG
pic of the 3 containers + spare tube
http://users.telenet.be/jortcollijn/...rs_present.JPG
all containers insulated with very thick armaflex
http://users.telenet.be/jortcollijn/...rs_present.JPG
gfx container insulated:
http://users.telenet.be/jortcollijn/...%b2gfx_top.JPG
going to make another gfx container for firefoxx, i will use the pin(nail) design on this one too.
if its done i'll demand posting results here:D
i'll show some pics if i have any :)
http://www.xtremesystems.org/forums/...id=33604&stc=1
i bought a clocksaw so i can make a nice round hole and put the tube into it
its like harleybro did but he only drilles holes afaik, harleybro maybe you can give it a shot too m8 ;)
Well actually my fav. is still the one with the maze4 bottom. It seems to work best. I actually have a new cpu container and gpu containers on order. With the sounds of them I don't think I'll be needing to ever build another container (at least for myself) ;)Quote:
its like harleybro did but he only drilles holes afaik, harleybro maybe you can give it a shot too m8
Hey Jort how thick armaflex have you used to this GFX container ?
Peter
2.5cm armaflex :)
WOW that is REALLY THICK :slobber: :toast:Quote:
Originally Posted by Jort
Have you done the ln2 run with this 2.5 cm insulation ? Does the armaflex "dry" on the outside, with -196 * C Ln2 ??
Why are your tubes so absurdly long? They look like they are WAY more than 1' in the pics and 1' is more then enough...
Yeah they do look a little long.
:brick: can i make my tubes as long as i want please
all the tubes i make are 40 cm, and i feel good about it.
thanks to remind me the 100000 time that they are long.
I believe longer would help with a smaller diameter tube the reason being more downforce on the di or ln2. Also a way to achieve more overall mass. :)
FINALY
can now everybody STOP saying the tube is too long, if you personaly think its too long just cut it in your mind :)
tnx, now i go one with my LONG tubes:)
peace,
Jort
here it is;)
http://users.telenet.be/jortcollijn/.../Gfx/pic20.JPG
didn't have a cup so i'll just use the copper from the container:)
http://users.telenet.be/jortcollijn/.../Gfx/pic21.JPG
http://users.telenet.be/jortcollijn/.../Gfx/pic22.JPG
i'll take good pic when its done:)
http://users.telenet.be/jortcollijn/.../Gfx/pic24.JPG
greetz,
Jort
and finished, forgot to take pics of the tubes brazed.
its allready insulated so it will be fot the next time.
http://users.telenet.be/jortcollijn/.../Gfx/pic28.JPG
http://users.telenet.be/jortcollijn/.../Gfx/pic29.JPG
http://users.telenet.be/jortcollijn/.../Gfx/pic27.JPG
http://users.telenet.be/jortcollijn/.../Gfx/pic25.JPG
http://users.telenet.be/jortcollijn/.../Gfx/pic26.JPG
greetz,
WoW, that gpu pipe looks really nice, very good work there Jort, way to go.
Tnx Apocalipsis,
i was tempted by the origininal chilly1 block that was getting me attention but had to less time and i need that evap to test a single stage next month.
very massive!!congraz jort
hehe JORT style... dont need to say more :D
Any results on that pin-base gpu pipe? :fact:
couldn't use it at the weekend, so its on delay:)
but someone is going to buy the same from me:)
firefoxx is the new owner of the next design within 2 weeks :)
next design? which one? I'm very interested on this, comon tell us :stick:
i mean this with the nails:)
the old was just drilled holes
greetz,
other copper?
please explain:)
i hope you don't mean messing or some "legeringen"
Yellow copper or somethin i asume
can you tell us the results you get using the different two? Whats the temp difference between drilled holes and nails? In my expierience driled holes have been much better, they seem to hold temps more stable and more cooler. Like to hear what you get, Thanks :)Quote:
Originally Posted by Jort
negative, nails is mutch better about holding load.
calculate, around 60 nails of 3cm long and holes of 0.5cm
wich one has the most surface?
the containers has proved to be more effective then the one with the holes.
like i said above i haven't got any time to test the gfx container.
To bad. Let us see some testing with the container then :D