Printable View
A64 939 3000+@2871mhz--2910mhz Cooling by Waterchiller :banana:
DFI Lan Party ULtra-D@SLI 323FSB (4X HTT)
Mushkin BL2 262fsb 2-2-2-0 3.8V
Ocz Power Stream 420W 12V:30A
Sparkle Geforce 6200 8 pipe soft mod 300/500@ 620/700 cooling by Waterchiller (only nature with 610/690) :D non vmod
3DMark 2001 : 21108 world class orb #1 :toast: non max limit yet
http://service.futuremark.com/compare?2k1=8483379
http://i145.exs.cx/img145/5656/15tz.jpg
http://img212.exs.cx/img212/323/image2965qo.jpg
:toast:
What are the temps you're getting?
Maybe you can put some better insulation on the block and the tubing for some extra mhz.
Water temperature is between -1 and 6 C
Hey guys , tell me how to 6200 vmod :D
beat my 9700pro by 1 point, nice lol :D
Ur score is low I 'd say look @ that http://service.futuremark.com/compare?2k1=8480698
cough*6200*cough
Great score and great overclocks on the geforce 6200 :banana:
But as $0m#0n# says it should be higher. Did you use much tweaks, I think it time to do it then, get DX8+win2k.
Very nice performance :toast:
But fear my vengeance for such a felony :D
Full voltmod ;) and chilling incoming
Cu soon
Holy s :banana: :banana: :banana: !!! I've got the 3298 score (http://service.futuremark.com/compare?3dm05=699393) under 3dmark05. My hat's off to you guys... back a month ago, AB86 and I thought we were king :banana::banana::banana::banana:, but now we're nothing. I finally got my Zalman in and it doesn't help much. I was able to move my scores up almost 100, but that's about it. There's no way I can get to 3600 like Ebola!
Congrats to you both. I guess I'm going to have to wait for water at this point before I can compete... or will I... :D
My cpu 0445 sbpw.. :DQuote:
Originally Posted by Ebola
My score is not max limit :banana:
http://img129.exs.cx/img129/6486/344qq.jpg
Water doesn't help that much, untill you do voltmod, that NV43 doesn't get warmer than 39°CQuote:
Originally Posted by Ackbar
With the 8 pipe mod for the 6200 you can therefore accurately compare to the 8 pipe 6600 I would say as they are using similar memory and both have the fully functional nv43 core.Quote:
Originally Posted by isp
It's all getting somewhat murky to be honest. I have a good score for the 6800 class but my card is a special with 2ns GDDR3 from Asus ( Gamers edition ) so really that is a GT when all 16 pipes are let loose. Same with Gigi's 6600 which is a 2ns GDDR3 MSI Diamond so that is actually more akin to a 6600GT
My 6600 does not give temps which is a shame, maybe I need a different manufacturers BIOS to get it.
Regards
Andy
6200s don't give t° neither, i had to edit the BIOS in order to reactivate it
Thougt the score wasn't on the max and amzing cpu :banana:
Was that 3200mhz screnshot done with only the waterchiller?
zakelwe: you have right about that, a 6600 with GDDR3 isn't really a 6600, same with the 6800nu gamers edition.
So you have got a 6600? How does it overclock?
Ebala:`great scores there too :D , how high have you came in 3dmark01?
I did not know that, I see what you guys mean then... all these pipe mods, and faster ram really turn them into something completely different...Quote:
Originally Posted by zakelwe
Then this is really more like a 6600 that's masquerading in the 6200 class...
either way, good job Brandybuck, I'm sure it took work! :)
We bought 6200 and we just exploit them at their maximum, it should be stupid not to do so.Quote:
Originally Posted by isp
What is lame is 9800 XT owners that downflash their BIOS in order to outclass everybody in 9800 Pro
True, if the performance is there to be had, why not take it. :up:
I agree that is lame...:mad:Quote:
Originally Posted by Ebola
LOL! You can do the same to the 6600GT using RivaTuner and beat out all the 6200's... wouldn't that be funny?Quote:
Originally Posted by isp
I actually ordered a Sparkle 6200 and when it arrived the receipt said 6200 but the card said 6600, so even the resellers are not too picky.Quote:
Originally Posted by ZeroHero
I did this tonight
http://service.futuremark.com/compare?2k1=8493446
which is second in the 6600 class behind Gigi's 2ns card. I did a 3dmark run as well and just ahead of Conrad, in the WHQL drivers decision, but at that point I gave up as I am going through one of my periodic "cannot be bothered" stages.
The card was completely stock but I id screw on the maze4 waterblock tonight but then could not be bothered connecting it all up and instead am browsing forums :)
Maybe tomorrow. Then volt modding.
Regards
Andy
It would be as lame as what i spoted, only for dumbs that are unable to clock their stuff and have to downgrade high end stuff to shine with budget cards ;)Quote:
Originally Posted by Ackbar
This my own opinion
Great score. What's the stock speed for the 6600? Do you think you can push 25k?Quote:
Originally Posted by zakelwe
Btw, is there a pencil vmod for LE/NU?
Ebola , I'm waiting your new score... :D
Well, only few time to give to o/cing at the moment. I will not hunt anything untill next week, all i can spend nwo is finding max mem with VmodQuote:
Originally Posted by Brandybuck
Stay tuned ;)
Done : 21415Quote:
Originally Posted by Brandybuck
Nice score ebola, time for Brandybuck to up the ante now !
Did the BIOS modm to see what my temps are for the 6600, goes to 64C during dragothic at 500/630 so not very good. Been constructing my watercooling today to see the difference.
Regards
Andy
Got some 70°C on high load while i was on air cooling. Since watercooling, i got far less artifect in some case. Number of artefact grew while t° was raising, now with w/c all that crapp is gone :DQuote:
Originally Posted by zakelwe
Have to do the Vmod GPU now, and attach a nice heatsink on RAM in order to feed them with 3.1V :D
Quote:
Originally Posted by Ebola
Great score Ebola :toast:
Have you Vmod this card?
I'm try to run after :D
Nice score man
Vmod done on VRAM. This give a big boost and big heating of chips. I'm currently running at 2.75V without heatsink at 743MHz instead of 693MHz at stock voltage that was 2.51V. I think that it's possible to reach 2.9V~3.0V with an insane cooling, which may give the possibility of raising up to 750~760MhzQuote:
Originally Posted by iMAX
I should have done Vmod GPU but i just received new UTT sticks that perform even better than what i hoped, and have to test it
ThxQuote:
Originally Posted by x3ro
I just got a brilliant idea! No longer is my card "bad" :DQuote:
Originally Posted by ackbar
This is seriously lame. I'm thinking of getting a 6200, someone mentioned that there is a difference between cards? TC cards aren't 6600, but how to spot a 6200 that is in essence a 6600?
Thanks
Newest got the NV44, but most of sold 6200 with 128MB DDR embedded are NV43 8pp tweakable
Ok, lets hope I get NV43
Huhu http://service.futuremark.com/compare?2k1=8503650Quote:
Originally Posted by iMAX
stop here now :D
I just saw the 03 WHQL is yours :stick:
Quote:
Originally Posted by Ebola
Come on, go....go...go :D .
@Ebola, can you run 3D03 with FM approved driver? I think you 'll win again :toast:
Focusing on my UTT as i want it to raise up to 280MHz :D I allready blowed one stick :( . Sounds as if it wasn't enough cooled :confused: even at 3.4VQuote:
Originally Posted by iMAX
Well vmod for gpu on Sparkle 6600 AGP is PIN 4 of the SOP-14 APW7063 IC. Set VR to 10k aqnd work downwards as per normal.
Might be of use to some AGP 6200 users out there :)
Measuring point is on the back of the card, back of one of the green caps
Regards
Andy
Quote:
Originally Posted by Ebola
UTT 280Mhz w/ 2-2-2- x, I love your UTT :slobber: .
Ebola, I can't waiting for you xxxxx :D
LOLQuote:
Originally Posted by zakelwe
nice score too
my ASUS 6200 VGA MOD ASUS 6600's bios :D
DFI ULTRA-D
3000+
TCCD 256*2
ASUS 6200 MOD ASUS 6600 BIOS
http://my.so-net.net.tw/xu1060/9696.jpg
That score is nice, may we know what it gives at same frequency but with 6200 bios ?Quote:
Originally Posted by peter lu
Nice score, petr lu, but why have you your cpu only at 2100mhz. It's not gonan do a big diffrens in 3dmark05 but you can get a little boost if you overclock it more.
Really nice see people pushing a 6200s so much :D
it's asus 6600's bios :DQuote:
Originally Posted by Ebola
http://my.so-net.net.tw/xu1060/asus 6600.rar
put
nvflash -e <-------ERASE BIOS
nvflash asus6600.rom -4 -5 -6
http://my.so-net.net.tw/xu1060/2222.jpg
Thx man for the flashing details :slap:Quote:
Originally Posted by peter lu
What i asked if you read carrefully is : did you try with same frequency with a 6200 bios ? (instead of 6600) in order to see what the 6600 bring
Is that the 6200 128 or 256?
because I can get both for nothing here, €95 :D
LOL... you europeans get excited over nothing. That's expensive compared to US prices.Quote:
Originally Posted by Juliette
And you americans have it too cheap :DQuote:
Originally Posted by Ackbar
In Europe, for €60 you get perhaps a X300SE, so €95 is great! ANd for €250 I can get a 6600GT TOP card! lol.
Is the 128MB 3.6ns and the 256MB 4ns or even 5ns ? If the same speed then 256Mb is obviously the one to go for, but with uch cheap cards my bet it will be 5ns, otherwise they will make no money.Quote:
Originally Posted by Juliette
Regards
Andy
Managed to squeeze out a 23k with my new 6600 ( the other one was dropped on the floor by some fumbling fool and I had to buy another one ) so back to #2 place in the 6600 class
http://service.futuremark.com/compare?2k1=8515114
This one does better than the last, 560/700 completely stock with the memory not topped out yet ( I ran out of time last night ).
Gigi's 25k seems an awful long way away. I shall try 03 and 05 tonight with it.
This is a good fight at the top of the 6200 class, looks like iMax has the edge at present, have you any more juice Ebola ?
Regards
Andy
Should have more juice, but focusing on my wedding ;) for few weeks
I heard, Eagle 6600 256MB Agp have hynix 3,3ns!!! memory.
3,3ns better overclocker than 3,6ns Hynix in practise??
My card: Eagle 6600 128MB Agp @ 520/666 with 3,6ns samsung.
Please wait I'm come in :D
http://service.futuremark.com/compare?2k1=8521162
650/710 @1.65v gpu and 130fps in nature ......
Still not topped out on gpu . Not bad for an AGP card.
Regards
Andy
http://service.futuremark.com/compare?3dm05=752085
685Mhz for gpu at 1.72v, now very bandwidth limited. Will need to work out the memory volt mod .
Regards
Andy
As you should suppose we would be happy you release the voltmod you did
May be as a tip, i can get up to 743MHz Ã:banana: 3DM01 on memory when applying them 2.7V without heatsink. I think we are still far from what this card can reach
See previous page for my volt mod.Quote:
Originally Posted by Ebola
yes, I am fairly bandwidth restricted now so will try and figure out the volt mod for the Sparkle memory.
Regards
Andy
asus 6200 with 6200 biosQuote:
Originally Posted by Ebola
my cpu is very bad :(
http://service.futuremark.com/compare?2k3=3884573
http://img3.picsplace.to/img3/1612/aaa.jpg
http://service.futuremark.com/compare?3dm05=760683
http://img3.picsplace.to/img3/1612/bbb.jpg
Nice scoring Peter. Does that have volt mod on memory or not ?
Regards
Andy
Quote:
Originally Posted by zakelwe
i haven't mod on memory or core.
asus 6200's mem is 3.6ns(hynix)
I'll test my 6200 with 3400mhz FX55... :D please wait... :banana:
Nice score Ebola. I think Brandybuck might be closing in soon though ...
What is your core and ram for those video cards guys? Or are you not giving anything away ?? :)
Regards
Andy
Ebola what's your card clocks... :) nice score congts. again :woot:
Thanx men, my video card is equiped with NV43 and 3.6ns TSOP Samsung
For this bench i set the chill to 5°C (cause i still use water as cooling liquid, on way for stg else) and ran the NV43 at 615MHz Vcore default (t° stuck at 36°C, real far lower), Vmem set to 743MHz with 2.7V no heatsink, fan blowing on. SPAW set to 2922MHz, memory at 270MHz 2-2-2 with 3.4V
I even didn't try to put my BH-5 as the UTT sounds good enough at >260MHz
I have seen this issue, my temp got stuck at 36C for my 6600 also even though nearer to 10-20C I would guess( cooling is -20C glycol/methanol). I tried the 66.81 drivers and bingo .. went lower than 36C ... :clap:Quote:
Originally Posted by Ebola
then it got stuck at 29C !!!! LOL :D
My new 6600 runs at 700/755 with volt mods, still testing it. Some freezing and other problems so might have to downclock it.
Good luck with your competition guys, have fun.
Regards
Andy
very nice clocks :woot: :toast:Quote:
Originally Posted by zakelwe
Thanks, the first one did 685/714, not bad these Sparkle cards :) Need about 1.7v for gpu though and good cooling.Quote:
Originally Posted by Brandybuck
Regards
Andy
WR :banana:
http://wowgame.free.fr/3000+%20939/3...6200%202k5.jpg
http://wowgame.free.fr/3000+%20939/3...206200bios.jpg
http://service.futuremark.com/compare?3dm05=806240
just testing ,but not max ,no arctefacts :D
i'll test this WE 3DMark 2k3 and 2k1 ,but with 6600 ID the scores are better :
6600 ID :
http://wowgame.free.fr/3000+%20939/3...00@634-699.jpg
http://wowgame.free.fr/3000+%20939/3...%20634-699.jpg3DMark 2k3 8558
OCM powered :D
634mhz gpu clock... :toast: very nice , what's your gpu cooling :D
thanksQuote:
Originally Posted by Brandybuck
just moded barton 2500+ cooling :D
but my 6200 was vmoded ,1.65 vgpu ,it isn't the max 634 i think 650 probably more ,i'll try next week end ;)
my asus 6200 edit 6600 ID . no mod. air cool (ddr=henix 3.6ns)
and my cpu is bad :(
http://img3.picsplace.to/img3/1842/AXX.jpg
http://img3.picsplace.to/img3/1842/AWW.JPG
http://img3.picsplace.to/img3/1842/QQQ.JPG
http://img3.picsplace.to/img3/1842/ARR.JPG
Wow, no mods at all? How did you get your memory to clock so high w/o any mods? I've only played with my Asus 6200 for about 45 minutes but the most I could get was 530/720 and 6800 in 3DMark03. 551/1197 is an amazing clock speed, how did you do it?
Wow. Cong :clap:Quote:
Originally Posted by peter lu
Fantastic score :toast:
WR. ASUS 6200. no edit 6600 ID . no mod. air cool (ddr=henix 3.6ns)
CORE/MEM=600/772
http://img3.picsplace.to/img3/1843/AWW.jpg
http://img3.picsplace.to/img3/1843/APK.JPG
MEM=DDR 3.6NS(HENIX)Quote:
Originally Posted by JDizzle
CORE/MEM=600/779. not 551/1197
The memory on these cards is very variable. I would imagine no binning at all goes on and some actually would pass as 3.3ns chips or better.Quote:
Originally Posted by JDizzle
( Andy gets out his pipe and slippers and starts to tell a story )
In the olden days 3.6ns memory would give you between 600 and 650 on average, say a maximum of 100Mhz over spec, but now it is 200Mhz over spec, from the same rated chips. In those good old days extra volts on the memory would let you get a lot higher, but nowadays it seems to give you less of a jump, say 20-40Mhz max. I'd say this memory has reached it's limit.
Regards
Andy
Sparkle 6200 ;
def memory clocks 500mhz (4ns hynix)
o/c memory clocks 700mhz stable .. :D
6200 new WR... :toast:
630/700 8 pipe...
not register yet... :D
http://img248.echo.cx/img248/2452/10sq.jpg
http://img248.echo.cx/img248/1460/27rb.jpg
Good job, :)
nice! 100% gpu overclock! :D
thanks :DQuote:
Originally Posted by saaya
300/500@630/700 ... :toast:
Congrats, you did it ;)Quote:
Originally Posted by Brandybuck
What about the FX-55 frequency ?
fx55@3050mhz.. :D water cooling , used winxp home edition with forceware 75,90 and ı didn't use any tweak , next time I'll try to win 2000 , tweak and 66,93 drivers.. :stick:
Thanx guy go on show Turk's power:D
first 22k with geforce 6200 :toast:
http://img66.echo.cx/img66/2107/220140nf.jpg
Very nice scoring, will get all the difficulties to beat it :( anyway i'll try to, but have to enhance my cooling system then
You Nature score is awesome, is your FX-55 (1MB L2) responsible of it ?
Can you publis it on ORB in order to compare ?
Ebola my friend thanks... :toast:
I'll try to win2000 and any tweak this night... :D hope 22.5k easily.. :toast:
http://service.futuremark.com/compare?2k1=8555405
http://img160.echo.cx/img160/1797/orb2cx.jpg
I have a Chaintech Geforce 6200 256mb AGP card and was wondering what would be necessary to achieve the results you guys are seeing. I have managed to gain 425/530 with stock BIOS. The GPU is equiped with the stock cooler and the memory modules are outfitted with copper Tt ramsinks (attached with supplied adhesive). I do plan on mounting an aluminum Skt A heatsink to the GPU sometime this week. Any advice would be greatly appreciated!!
-Fb
:toast:
Nice work team turkey / Brandybuck, very good scoring. Nad not too many tweaks either !
Regards
Andy
thanks my friend :toast:Quote:
Originally Posted by zakelwe
I thought I would join the fun
http://service.futuremark.com/compare?2k1=8558892
20k :WOOT:
My 6600 finally tops out at 710/733 but still only good enough for #2 in 6600 class at 24500
http://service.futuremark.com/compare?2k1=8558886
http://service.futuremark.com/compare?2k1=8559282
that was the 3rd run this mroning before coming to work. Not a bad card, not topped out yet. On the original leattek BIOS would not do 500MHz core.
Nice heatsink, the best I have seen yet on any 6200/6600, easily better than the horrible sparkle ones.
Regards
Andy
zakelwe cong.. :toast:
very nice score... :D
my card clocks are 630/700 and 3050mhz fx55 and your card clocks are 550/680 and 2890mhz.... :confused: :woot:
hımm.. I ''ll try win2000 , tweak and change forceware drivers... :slap:
Thanks Brandybuck, appreciated :)Quote:
Originally Posted by Brandybuck
Yes, after about 70.90 drivers I found the overall score goes down ( though nature goes up ), plus I have a couple of other tweaks or three :D
I spent so long benching the Sparkle 6600 card then with this 6200 Leadtek it was very easy with not too much to learn. I have been benching the 6600 over 2 months with 2 cards ....
Good luck with the tweaks, I will tweak mine more tonight before modding it sometime in the future.
Regards
Andy
I used 66.93 drivers on winxp but dragothic scores and nature are very poor.. :( only car low is very good , did you use acpi multi twaek with win 2000 :D
my card is sparkle 6200 but I'm not sure the bios and memory timings are very good :confused:
Yes.Quote:
Originally Posted by Brandybuck
Interesting to compare, I am high in car low, you in hi, me in lobby low, you in lobby hi !! drag is equal and you are up in nature due to card clocks and driver.
You could flash it with the Sparkle 6600 BIOS, that is what I am using on my Leadteck, maybe it will help ?
Regards
Andy
Thanks zakelwe... :toast: I'll try it.. :D edit my 6200's bios with sparkle 6600 memory timings :) , maybe some core voltage and more fx55 mhz.... :woot:
Quote:
Originally Posted by zakelwe
Got the ORB1 excellent work. :woot:
710MHz on the core is awesome. I hop i will reach such a frequency :o Still 1.7V ? and what about t° at 710MHz
I'll have to stick up a 03 score or 05 this weekend so it actually shows on the orb.Quote:
Originally Posted by Ebola
The voltage is 1.67v in Windows which goes up to 1.72v in 3dmark, why it goes up this small amount more I am not sure, I thought they did a lot lower in BIOS and 2D and went up a lot in 3d, maybe it is a combination of Sparkle BIOS and rivatuner force performance ON.
Temps I am not sure, it always says 29C on Rivatuner due to temp bug for driver ( 36C in later 66.93 driver ) but it must be a fair bit lower than that if the Dangerden is anything to go by
http://www.aocb77.dsl.pipex.com/66600volt2.jpg
Regards
Andy