stock heatsink on air
http://img142.exs.cx/img142/7589/30001jb.jpg
Printable View
stock heatsink on air
http://img142.exs.cx/img142/7589/30001jb.jpg
What kinda ambient ?! WoW thats :banana::banana::banana::banana:in unreal ! :banana4:
Stepping? Stability?
IMHO, to much capture, to little benches now days.
ambient 20C~
s&m 1.51 stable @ 2700-2800 1.55 vcore
CBBHD 0447UPCW
10x
Nice chip there :toast:
What MB?
DFI NF4 Ultra-D A02
Nice clocks, even 2.8ghz prime stable is awesome.
temps? Thats pretty impressive, but I'm tired of all these posts lately with just screenies :(
nice job, waiting for the results with the phase change system :)
Wow, maybe he got the one with a Venice core :D...Thats probably the only logical explanation for a 3000+ at 3ghz !!!! VERY well done.
Perkam
dayum
I kinda doubt venice cores in winchesters, if so, does his have sse3? there was a rumor that winchesters past week 45 have strained silcon but not much about this has surfaced. Could just be amd used a new batch of silcon wafers when their old batch ran out on week 45 and the new batch is purer, better quality. This is a good explanation why the majority of pre week 45 winnies do 2.3 to 2.6GHz while post week 45 do 2.5 to 3GHz, yours being the best of course :slobber: how stable is yours at 3GHz? I can get mine to 2.6GHz max 3dmarkable with it making it thru sometimes. I cant even get to windows at 300x9=2.7 though! I never really bothered to find its stable limits cause of the ondie controller, but 2.48GHz with my ram async still wasnt stable, I got a early week 37. Yes I could always get another 3000+ winny or even 3200+ and try my luck but id rather just save for venice anyway, I want one big bang instead of several tiny leaps :D
anyway if this is any indication of winchesters to come, hopefully we see the first venice do 3GHz or what the best winchesters are doing with Venice of course improving from there. I might wait out and let the first venice pass cause prices may be high initially cause everyone wants to be the first to one. In perhaps 3-4 months ill get a later week venice or even san diago and my goal is 300x10 if not higher like 310x10, 300x11, etc depending what ram I have by then. :D
that proc doesnt have SSE3
SSilencer has a 3000+ 754 doing 3ghz on phase, benchstable i think. i would rate that more impressive since on air they only do 2.3-2.5ghz, while winnys like aircooling best and often get high screens
I cant get to windows at 2.7 but I can bench at 2.6 so its not true, at least not for me
your winnie sucks? :rolleyes:
snapping a clockgen screenie with very high vcore a few hundred mhz over stable speed doesn't indicate a new manufacturing process...
i'm guessing cold air, +.35v, very unstable (just a quick snapshot with clockgen)
the question is... is it stable? I am able to get 2.7ghz on my 0444UPAW but I dare not to find out how much further it can go...
i can get a screenie of my week 12 claw 3200+ at 2600mhz on air at 1.75volts but is nowhere stable. mine is stable at 2300 at 1.5. that is all i need. now if that was 3d stable cool but a screen is only a screen.
Where do you get this info from? I've had a week 50 and week 51 and both sucked for overclocking - neither one would break 2.6 GHz. One was maxed at 2.3Ghz, the other 2.57 Ghz. :rolleyes:Quote:
Originally Posted by Geforce4ti4200
10q u all guys.
about that "only screenshot" thing, I think a SS on the max edge is a very good indication of the chip potential, this chip is s&m 1.51 stable @ 2.7-2.8 on stock heatsink !
You can not say in anyway "this is only a SS it does not show anything".
It shows that winnis in general and this little dude can scale real high and do 3ghz++ under phase.
I think it will put up a good fight to the FX55 :slash:
i think a s754 claw would get a lot closer to a FX 55 than a winny. dual channel is what 500 points in 3dmark 2001 and 1mb cache is like 2k
I can take a screening with my winnie at 3ghz, but of course its not benchable! Currently running 2.5@1.47v prime stable over night.
awesome cpu with stock cooling :slobber:
10x trecca :up:
I don't care what they say...Very nicely done...
Leave her there and burn it in right... :toast:
very nice oc :toast:
post some tests plz :)
yo switch to phase-change prolly go to 3.2ghz at least yo.
Pretty impressive, especially on air! :toast:
amazing cpu the byter
one of the best athlon 64 (non fx) that i see and it on air :YIPPIE:
1.7volts on a winchester with stock cooling?
Anyone got some water handy? :p:
impressive job (on aircooling)
some late night numbers
http://www.xtremesystems.org/forums/...id=24224&stc=1
http://www.xtremesystems.org/forums/...id=24225&stc=1
just a quick one, all on stock air and vcore...
wow youve got one of the best winchesters ive seen, I cant usually even complete superPI at 262x9=2.36GHz but I dont care anymore with venice on the horizon. Do you still have venice on the list with such a good winny
Get a GPU. :DQuote:
Originally Posted by Geforce4ti4200
Well AMD did sign a new contract on its sillicon provider (some french firm if I recall correctly). So maybe this is the case?Quote:
Originally Posted by Geforce4ti4200
I know, these results with just benches are annoying :) I want to see that Adriana Lima desktop and whole setup! We want open bench system pictures :banana: !
Anyhow nice results. How high are Idle temps? Load I guess you dont know, as they would rocket through the roof :)
btw Byter, what's that nice shiny thing right in front of your keyboard? (The supposed LCD).
10x
Thats my LCD, I use jalcd with it, but now the DFI does not have a LPT port... I got a LPT card but no go for now... :\
... any chance to see it running above 2.7Ghz - no matter what volts you are willing to use ???
EDIT: and by "running" I meant "some 3D action or "bigger" SuperPi calculations (like 8M or 16M)...
EDIT: on AIR that is....
... error ..
benchable on air @2700 ?
meh.. mine was stable at those speeds too and it was a week 41. week dont mean jack unless they updated the process... if they went to SS it maters but i doubt they randomly did that.
but still 2700-2800 is a good overclock. One of the better winnies ive seen. I just wish i wouldnt have fuxxored mine.
It's benchable alright, 2k5 , s&m 1.5.1 and all other.
when I'll get home I'll post some pix - just for the skeptic ones.
all on stock hsf.
Phase change is coming up today, I just need to change mount from the 462 to 939 and regas it. -65C~ coming up !
see you @ 3ghz+ ;)
Do winnies not have the minus temp problem anymore?
Some do, other dont.Quote:
Originally Posted by winston
ANy trend or is it just luck?Quote:
Originally Posted by $0m#0n#
subscribed::
but were urs stable at those speeds on only 1.45v :stick:Quote:
Originally Posted by MaxxxRacer
and week does matter, how else would the 0448 ones OC way higher than all the other steppings