Printable View
The MSI Diamond SLI seems to be a good OC board, here are some quick results :
http://pedrorocha.planetaclix.pt/MSIDiamon355HTT.jpg
http://pedrorocha.planetaclix.pt/MSIDiamon290Mem.jpg
This with TCCD's with just 2.7v (mem voltage goes up to 2.85v).
It just needs a new Bios with more than 1.65v on VCore (there is already one beta bios for Platinium SLI that suports 1.85v), with that well be almost perfect.
For Bios 1.0 is incredibly stable, I would say even more than Neo2.. good work MSI :)
Very nice result Pedro :D
Is 355MHz HTT complete stable? And how about Voltage dropping under load?
Next week I will get the Neo 4 ultra with 3000+ s939 under phase change :D
Yep, with HTT 3x - 100% StableQuote:
Originally Posted by kakaroto
With HTT 2x I can go near 400Mhz :slobber:
That is good news, cause MP9 requires good HTT.Quote:
Originally Posted by Pedro Rocha
You can break some new records dude!
Ow one question, the devider(s) are they working propally at 300 ~ 355MHz HTT?
its look thet the neo4 in even better then the wonderful neo2 :toast:
but im still wait for the dfi results...
my 3x LDT isn't working properly.
CBID reports HT as 1040, but my bios is set to 260x3.
this is on 1.21 beta bios. I will flash back to 1.1 official and see what happens.
EDIT: CBID is just messed up, sandra reports it correctly.
ah, damn 1.1 official bios still has CBID reporting it as 4x multi. i can't go past 290 stable with 4x.
EDIT: CBID reports wrong.
Pedro Rocha, are you registered as a Diamond club member? If there are any BIOSes there, what are they like?
EDIT: Just noticed you are registered...
Here's my Neo4 with a Winchester 3000+. I have the beta bios with percentage at 20 percent... and it only gives me 1.66v. Still good enough for this Winchester. It's stable as hell surprisingly. Here's a pic.
[IMG]http://img154.exs.cx/img154/3350/stableasallhell5um.jpg[/IMG]
What cooling you guys are using. 1.65V was the maximum you could give a winchester on boxed cooler am i right?
Yeah... I used a Zalman CNPS7700-ALcu heatsink. The cool thing about this board is that since I couldn't find memory that can run 1:1 at 300HTT (I even tried several G.SKill's) this board let me use a 180Mhz memory divider rather than only 166Mhz. So now my memory is at 270Mhz instead of only 250. Nice..
Where can I get a good bios for the Plat SLI from? Ive got one here waiting the arrival of a winnie on tuesday.
MSI performs TOP! I hope DFI will perform like my Diamond :stick:
MSI Diamond SLI (BIOS: 1.1 Beta)
2x512OCZ EL Rev.2 2x512
Ati x700
LDT 3x
For MSI
1.55VCore SUCKS !!!
http://mitglied.lycos.de/siedl/Winch...50_cpumark.jpg
http://mitglied.lycos.de/siedl/Winch.../9x350_mem.jpg
http://mitglied.lycos.de/siedl/Winch...x350_multi.jpg
http://mitglied.lycos.de/siedl/Winch...0_everest1.jpg
http://mitglied.lycos.de/siedl/Winch...0_everest2.jpg
http://mitglied.lycos.de/siedl/Winch...0_everest3.jpg
http://mitglied.lycos.de/siedl/Winch...x350_cpuz1.jpghttp://mitglied.lycos.de/siedl/Winch...x350_cpuz2.jpg
http://mitglied.lycos.de/siedl/Winch.../9x350_CBI.jpg
What cooling you got on that winnie? Vey nice result ;)
vapo
Anyone have any ideas?Quote:
Originally Posted by Bennah
incredible 3000+ Winny!Quote:
Originally Posted by Mrki
in your k8n sli plat do you have options for onboard marvell lan and sil image raid? i have the options in bios but not on the board. I was half suspecting mine had been used, sli connector wasn't in anti static bag like on my asus(and seems like it would have been) , wondering if someone flashed to wrong bios or something. Couldn't get windows installed on a raid 0 using 2x 200GB dm10+'s on the nvidia controller using msi drivers off the cd put onto floppies. Some msi websites say this board does have sil image raid, some say not, most show photo of it with raid.
Awesome result dude!
Damn, thats an incredible OC!!!
really good oc board, 355htt full stable :slobber:
but 1,65v vcore is very bad:(
You can take 2 minutes and solder one 20K VR to fix the vcore issue. 1.85v is solid as a rock with the mod, and you still get the high HTT speeds.
I'll have my board soon, the Neo4 Ultra is already modded and running good, so I can't wait to get this one.
my winchester must really really suck, for some reason i can't even run stable above 290. thats with 3x and with mem divider.
i'll be first in line for revision E. they better fix their memory controller issue for that revision.
I really need a new bios for my Diamond SLI card.. its ustable and does random reboots, even at 2900mhz.. I can run super pi and 01 @ 3.22Ghz..
1.65v, Mach II r404
Turns out the board I got at Newegg is a diamond.
http://driverheavenuploads.co.uk/SIK_L_CELL/310.JPG
my new score with msi diamond sli and 2x6800GT inno3d ;)
thats a 3000+ Winchester at 3100MHz
http://arc.aquamark3.com/arc/arc_view.php?run=285975620
http://mitglied.lycos.de/siedl/Winch...4_aquamark.jpg
very nice 3000+ on air ?
vapo ls :) ...
is there already a solve for this board (winchester subzero bug) ?
or is this really a cpu related problem ?
thnks
Ok, I have a question. Why is it that I can only get a max Vcore of 1.55V with my winnie while I see a lot of other people with a SLI Platinum/Diamond board+winnie that get it up to 1.65V?
Which part of my system is causing this 'massive' undervolting? Is it my 3200+? Is it my PSU? Is it My SLI Platinum?
Anybody got an idea?