Some update for DFI NF4 board

1.Temp trick prevent Winchester subzero problem:
**from friend MGV101's explanation

The board displays the temperature using a 8bit binary digit which could display up to 256C.

It cannot display -ve numbers so when it drops down below 0 (00000000), it jumps back up to 256 (11111111).
This is when you install the ITE SmartGuardian monitor program. like the pic below, you can see the temp is 239, so:
239-256=-17..that's about it!:D

http://img112.exs.cx/img112/4596/xsvdimm9oj.jpg

2. I am testing the newest bios Oskar gave me tonight which add the Bank Interleaving as I read it from the thread the other day (I forgot which thread), that's what I suggest him to do so.:D

Stay tune

Hey give that CPU some volts. Let's see some real overclocking :D

Can you post benches before & after interleave fix and compare to the MSI mobo as well?

that's what I am doing now, will have update later on.

interest re the temps :)

so even though it thinks the temps are enough to melt the computer, it lets it boot?

wow this board looks better and better each day. i knew that 939 nf3 was just a horrible fluke

Hmm? Same as the NF3, I thought everyone would have worked this out?

Quote:

---

Originally Posted by pik-ard v1.1

so even though it thinks the temps are enough to melt the computer, it lets it boot?

---

:lol:
i hope the board will shutdown when cpu temp reach the limit with normal fan cooling tho :stick:

Quote:

---

Originally Posted by pik-ard v1.1

so even though it thinks the temps are enough to melt the computer, it lets it boot?

---

The BIOS shows correct sub-zero temp., just the software can't ;)

Quote:

---

Originally Posted by TinTin

The BIOS shows correct sub-zero temp., just the software can't ;)

---

smart... software??! :stick:

ok thanks :)

Quote:

---

Originally Posted by R.Rabbit

smart... software??! :stick:

---

I see this software showing on their manaul, where is it? :D
Don't know it is smart or not... :D

Quote:

---

Originally Posted by TinTin

The BIOS shows correct sub-zero temp., just the software can't ;)

---

well that makes loads of sense... :stick:

Try Tccd set as DDR525 CL2;)

http://img45.exs.cx/img45/1668/ddr525cl27fq.jpg

Did it do that on any other board? What volts, btw.

Quote:

---

Originally Posted by IvanAndreevich

Did it do that on any other board? What volts, btw.

---

This is on the DFI board, 2.9v:D What 'd you think how high the voltage TCCD ic can tolerate?:D

Quote:

---

Originally Posted by Onepagebook

Try Tccd set as DDR525 CL2;)

http://img45.exs.cx/img45/1668/ddr525cl27fq.jpg

---

Is LDT scaling down automatically like Oscar said and u are forcing it to 5x with a64 tweaker?

nice results, where can I download smart guardian :)

comes with product I think?

Quote:

---

Originally Posted by MarilynMX

comes with product I think?

---

yup, it should come with DFI board when you purchase that. :)


OPB

2.9V - still some volt-loving TCCD.

I meant can your memory do this @ CL2 on OTHER boards or only on this DFI?

OPB, what G.skill is that which you are doing cas 2 with 262? Is it available for consumers or special stuff only for you?

OPB - can oskar seperate the TRCD-r and TRCD-w values like they were on the nF2 Lanparty-B/Infinity?

nice results opb

im jest wondering, the dfi really can go over 4v fo the mem ? :confused:


(i need 3.4-3.5v for my vx)

Use a DDR Booster for 3.5v, use DFI and a monster PSU for 4v. :D

Quote:

---

Originally Posted by STEvil

OPB - can oskar seperate the TRCD-r and TRCD-w values like they were on the nF2 Lanparty-B/Infinity?

---

If they aren't infact seperated it would be a good thing to do so. Having one limit the other isn't good. Perhaps one of those can be further changed while leaving the other alone?

Quote:

---

Originally Posted by Blindbat

Is LDT scaling down automatically like Oscar said and u are forcing it to 5x with a64 tweaker?

---

That's what you set auto for LDT!;)

@Ivan, I pretty much sure on the other board, it's still capable for doing DDR500 CL2@2.85~2.9v

CID, that 's about ho LA 512kit can do about!:)

Stevil, I will ask around:)

cupra, I try that already, bios set 4v is actually about 3.96v

Let's see some benches interleave off vs on :)

:D Hey OPB - my mind goes more and more towards DFI NF4.......

:toast: