3000+ & G.skill LA test

Hi

I just got my new G.skill 2*256 LA to run with my 1 week old 3000+ 0.09. So far the testing looks good. nothing special, but ok for starters :) Unfortunatly my NEO2 is holding me back maxing out at 310......

I have another thread going in the AMD sektion about my 3000+, but i thought i would start a new one in the oc sektion, course of my new g.skill arriving :)

I will do some more testing later. Ram is at 2.7v

I had the cpu booting at 3 ghz, but i cant test it at that speed becourse of NEO2 unstability at those FSB

it says 440 on the ram by the way:)

you got it to 3.0ghz on a water chiller'? That seems pretty nice little OC there.

its with poor water. (Asetek waterchill with l20 pump and single radi) its not chilled water, but normal watercooling :)

very good!
my mobo/cpu stops at 310fsb 1t , too!
i have the same ram but s754 dfi board and i need to usw 2,5/4/3/7 to archieve anything about 300mhz!

mfg

here a pic: i need to use 3,1 v :rolleyes:
http://server3.uploadit.org/files/bl...lab-310fsb.JPG

4#

Welcome to Xtremesystems.....:)


3.1 for these ram seems like a lot to me(TCCD dont need that much). try them with 2.7/2.75v

i have read somewhere that neewer TCCD like voltage more than the older ones. but 3.1 still seems like a lot :)

hehehehe..... 300+, 1:1 3D Stable's not good enuff for you?
Anytime you're at 2.5-3-3 and 300+, 1T... you're doin' it "good"

C

Quote:

---

Originally Posted by charlie

hehehehe..... 300+, 1:1 3D Stable's not good enuff for you?
Anytime you're at 2.5-3-3 and 300+, 1T... you're doin' it "good"

C

---

hehehe....ofcourse its good enough. But when i am pretty sure that it can do more, its sad not to be able to try:) I mean...thats what its all about right......to go as high as posible :)

Damn nice clocks, Gskill is really proving their worth, over and over. I'm honestly astounded - Those are very impressive timings, LA seems the way to go - I may have to get myself some.

Quote:

---

Originally Posted by SIOUX

Hi

I just got my new G.skill 2*256 LA to run with my 1 week old 3000+ 0.09. So far the testing looks good. nothing special, but ok for starters :) Unfortunatly my NEO2 is holding me back maxing out at 310......

I have another thread going in the AMD sektion about my 3000+, but i thought i would start a new one in the oc sektion, course of my new g.skill arriving :)

I will do some more testing later. Ram is at 2.7v

I had the cpu booting at 3 ghz, but i cant test it at that speed becourse of NEO2 unstability at those FSB

it says 440 on the ram by the way:)

---

Nice RAMs you got there. :toast:
What is the Batch of your 3000+ ?

Quote:

---

Originally Posted by SIOUX

3.1 for these ram seems like a lot to me(TCCD dont need that much). try them with 2.7/2.75v

i have read somewhere that neewer TCCD like voltage more than the older ones. but 3.1 still seems like a lot :)

---

hi,
yes i was suprised, too but i noticed that more voltages gives me less/none errors in memtest. 2,75 is much too low for this ram @ my system.
i run them everytime with 2,9 (1,5/2/2/1 @ 200) and it's stable and fast!

mfg

Its a 0450SPMW :)

very nice results!

So....I have done some more testing with a little colder ambient temps (12 degrees c)

I tryed a multi of 8x, to be sure it was not the cpu maxing out, a divider for ram, and the conclusion is that my MB cant do more than 315 fsb stabil for sure.

Ram maxed out at 312 with 2,5-3-3-10 1:1 1T 2.75v. More volt did not help anything. with 2.5-4-4-10 i could do 320, but as said before my mb is not stable ther. But i dont realy care how high they will go with those timings.....i stick to 2.5-3-3-10 :)

So all together i am pretty happy with my result, RAM and mobo match perfect together. MB maxes at 315 and ram at 312 with good timings....:)

The only sad thing is that i did not get to see how far the CPU would go. I will have to get a better mobo that can do higher FSB for that

Anyway...here are some final screenies from my G.skill 2*256LA / 3000+ 0450SPMW / MSI NEO2....END OF TEST. :D The chip will either be sold, or end up in a 2.nd gaming rig :)

Going back to my FX-55 setup soon. As i said from the beginning this 3000+ was just a temp chip to keep me company until my FX comes back :)

I hope to be back with some nice water results with g.skill and fx-55 :)

Thank you !!!

Pretty nice chip, what's more impressive are those ram.

I´ll say that CPU is a keeper! Nice clocking :thumbsup:

Thank you :)

Very nice and impressive results, congrats.
Nice combination you have, keep it as a second, gaming rig.
:toast:

:) congrat... the same CPU but not with rams...


http://img198.exs.cx/img198/1014/memscorezz1ob.jpg

Zanr Zij#


Very nice results :)

could u do the same or higher :toast:

http://xtremesystems.org/forums/atta...chmentid=23195

with that screens of 0450 winchester's i'm thinking to change my DFI and 3000+ s754 @2500 1.5v for a AGP based mobo (or PCI-e, but i don't want to change my 6600GT..., if it's pci-e will be DFI for sure) and a winchester like that ones...

Quote:

---

Originally Posted by Zanr Zij

could u do the same or higher :toast:

http://xtremesystems.org/forums/atta...chmentid=23195

---

If you look at the first screenies of this thread, you can see that i am able to boot into windows at 3ghz, but my mb is not stable at all on those speeds. It maxes out at 310 stabil. I dont want to use 2.5-4-3-10 like you. i stick to 2.5-3-3-10 ................it gives me better performance:)

Are yours stabil at 3ghz, or just for screenie ?????if stabil......can you run some tests?????? :)

Wow dude.. 3 Ghz on _plain_ water?! Try different bios -> Neo2 should do 330 HTT easily.

Quote:

---

Originally Posted by IvanAndreevich

Wow dude.. 3 Ghz on _plain_ water?! Try different bios -> Neo2 should do 330 HTT easily.

---

I tryed 1.4 / 1.41b / 1.36 /1.37mod I am yet to try the newest 1.51 do you have any experience with that one???? ANyway...i will try it out:)

Never tried 1.51 and my neo died a couple of days ago - RMA :-\

HTT multi 3x should let you go up to about 350 HTT..

I already run with HTT x3 ofcourse. I dont think i could go to 310 on a x4 HTT :)

what cooling you using zanr zij?

I took the chip out today to do dome stuff, and i saw it was a 0450WPBW. not a spmw :)