http://de.geocities.com/hardcoreclocker/10x343.JPG
Still waiting for my G.Skill LA to do that 1:1 :D
So far 1:1 bench stable for getting 25sec SuperPi is this:
http://www.kaltmacher.de/mysystem.php?u=7074
:toast:
http://de.geocities.com/hardcoreclocker/10x343.JPG
Still waiting for my G.Skill LA to do that 1:1 :D
So far 1:1 bench stable for getting 25sec SuperPi is this:
http://www.kaltmacher.de/mysystem.php?u=7074
:toast:
That is great :D
neues nick neues glueck? =o)
What ram are you using to do this feat?? :)Quote:
Originally Posted by HARDCORECLOCKER
Looks like Adata from the link provided.
musk
great clocks :D :toast:
what stepping fx do you have?
:D Stepping is 0442 / GPMW and yes - yet I use A-DATA DDR-600 but I burned them and that's the reason I have to use a divider now. They do not like high FSB anymore.
Next week I get a pair of BH-5 and a pair of G.Skill LA - then I'M going for another 1:1 clock again...........
:toast:
Same week 42 with gskill LE :toast:
everest....
:D Hey DUMO - very nice, but You know using a .5 multi causes the following:Quote:
Originally Posted by Dumo
11,5 x 298 = 3.427 : 12 = 285,58 RAM speed
:toast:
Thanks, it is ok since I can benched at 3.39Ghz and passed 100K on AM3.. :D http://arc.aquamark3.com/arc/arc_vie...run=1426005199Quote:
Originally Posted by HARDCORECLOCKER
and cpu score is faster than 282x12 ;)
I hate you, I hate you, I hate you!
I can't even get mine to run at 3Ghz at any voltage with chilled water and with the heatspreader off.
:D Hey DUMO - did You try 10 x 339 with a mem divider 166, that's a mem frequency of 282,5.
Perhaps better performing caused by the higher HTT and more stability by avoiding a half multi.
My NEO2 maxes out at 350 HTT, but chipset is watercooled.
:toast:
I have 0439korea and cooled with microcool northpole. It wont go above 304 :( . You got a killer neo2 there :toast:Quote:
Originally Posted by HARDCORECLOCKER
:D Hey relax a little - I clocked a XP-M 2600+ on socket A up to 3.070 MHZ and now I do this here - I know it's a lot of work with many problems.Quote:
Originally Posted by DragonFire
But for every problem there is a solution - You removed the IHS of a FX-55 ?
That's a risky thing - maybe You damaged something ?
Give us some more specs of Your rig - perhaps someone can help You to get higher.....
:toast:
here is mine with le :D , too bad, neo4 only got 1.635v max :(
http://www.devilsword.com/opb%20cascade/test/9239bw.jpg
http://www.devilsword.com/opb%20casc...st/pi1m24s.jpg
:rolleyes: @DUMO: What kind of cooling is "microcool northpole" - air or water or something else......?
:toast:
air coolingQuote:
Originally Posted by HARDCORECLOCKER
:D @Onepagebook:
Hi - nice to see You here - I did bet about it...........
Big personal thanks to You - though I registered today I follow the forums for a long time and especally Your posts did help me a lot !!!
BTW - what kind of cooling do You use yet for the 3.465 on NF4 with such a low voltage? Dryice or cascade?
Cannot imagine it's a single phase with only 1,616 Vcore..........
But don't worry - it will take a few weeks and then someone writes a good BETA BIOS for MSI NEO4 with more Vcore.
Did You see the bench pictures of the DFI LP NF4 in progress? 412 HTT...!!!
:toast:
I do have my own post about it but its been lost on page 2 already.Quote:
Originally Posted by HARDCORECLOCKER
Specs:
Antec Neopower 480
NEO2 (duh) 141mod bios
FX-55 (duh) 0448 XPDW
1GB Corsair 3200XLPT
X800 XTPE
Audigy 2 platinum
WD 74GB raptor
Seagate 160GB
NEC 3500
Cpu and gpu watercooled with TDK and Maze4. Heatcore, res, and pump outside. Current water temp is about 55F.
I had problem with anything above 2.8 before removing the heatspreader which is why I removed it. At 14x200Mhz I have to use 1.61-1.65V to get XP to load, prime95 sometimes runs and sometimes returns a error within mins. At 3Ghz with upto 1.88V prime95 returns error right away, most games like HL2 or The Sims2 causes the computer to restart.
At stock settings my temps are about 37C/48C before and after removing the IHS. At 2.8Ghz my idel temp is the same but under load I see it reach 50C. At 3Ghz my idel jumps to 40C with under load reaching 53-55C.
At the moment I'm running 10x260Mhz with just 1.3V and prime95 has been running for almost 2 hours.....
Quote:
Originally Posted by HARDCORECLOCKER
Hi dude..nice to see you too!:D
actually, msi neo2 can do over 400htt too if I am not wrong.;)
I will have DFI board for detail test on either Thursday or Friday. ;)
:D O.K. - it looks a little better than the crappy stock cooler - but on NF3 the chipset has to do a lot of work because of the union of NB & SB into one chip - so it's quite normal You'll have also the union of heat from NB and SB together !!!Quote:
Originally Posted by Dumo
I saw a lot of NEO2 boards which maxed out at 300 - 320 HTT - all on air.
So I decided to get the chipset under water, unfortunatly I never tried air cooling so I have no real compare.
But maybe it will help You - try to get a second hand WC for less money and put it on Your chipset............
:toast:
What I need is a dual cascade and machII moded for xtpe :D
:slobber: @Onepagebook:
More than 400 HTT with a NEO2? 1,616 Vcore for almost 3,5 GHZ on NEO4?
Did you put a 3-steps-cascade on Your CPU and a single phase on the chipset..........???
:toast:
:D Good idea - but a very little more expensive than a second hand WC....Quote:
Originally Posted by Dumo
:toast:
I have Chilly 1's dual stage Cascade. :toast:Quote:
Originally Posted by HARDCORECLOCKER
Chipset? do nothing..just original fan on it.. :D
see the NB fan there?:D
http://coolaler.nil.com.tw/images/hifsb/HIFSB4.gif
:D @Onepagebook:
Yep - dual cascade cannot be compared with a sigle phase - if I send You my CPU it would run 3,6GHZ with Your cascade..........
But 400 HTT chipset on air is outstanding for a NEO2 - never saw this....!!!
:toast:
Did you see above?
well, I remeber I get 1.85v for 3.4xg on Vapochill LS too..;)
forgot where I put that 3.4g pic, but here is the 1.8v on vapo LS run after 3d01
:D
http://www.e04hardware.com/fx55/39534.jpg
Congrats!
Absolutely wild speed!
Seems I now got serious competition. (Except for the cascades, of course, especially 1pgb who obviously has unlimited resorces ;)) But still a cascade won't run 24/7, or am I wrong?
I was chasing 24sec. today, but no go... It's pretty close, though.
How about your 8M?
BTW, we actually tested a friend's FX-55 on my rig today and it would not go ower 3.05GHz. Any memory, any settings. A really sour apple. 0432MPMW. Beware of those! :D
EDIT: typo, might be a lot more :mad:
:D Now with a little more Vcore improvement of speed & bandwith - this is almost unbelievable on single phase - seems to be a real killer board and CPU is an animal: :slobber: :slobber: :slobber:
http://de.geocities.com/hardcoreclocker/10x348.JPG
:toast:
Hey OPB, isn't it dangerous to make the AGP clock above 66?
:D Here're some PICs for You all - You only can believe what You can see...
http://de.geocities.com/hardcoreclocker/A64Sys001.jpg
http://de.geocities.com/hardcoreclocker/A64Sys002.jpg
http://de.geocities.com/hardcoreclocker/A64Sys003.jpg
http://de.geocities.com/hardcoreclocker/A64Sys004.jpg
http://de.geocities.com/hardcoreclocker/A64Sys005.jpg
:toast:
Wow, nice! I still want my FX-55 to take 3.2GHz in Windows reliably with my Vapo LS... 3.05 or so is not very good. I wonder if I've applied the clamshell wrong somehow? :stick:
can I get 3dmark 2k3 or 2k1 at 3480mhz ;)
Heard for some reason that it helps when clocking to extreme htt to keep agp in synch, surely though your vid cards gonna die doing that though.....Quote:
Originally Posted by shadowing
Great clocks guys..Quote:
Originally Posted by Onepagebook
Isnt your cascade still at reggies opb? I just spoke with him two days ago..
I second that...Quote:
Originally Posted by choseone214
Nice cpu you got there :)
My FX55 does 3514 Mhz with a R404a Mach1 but only for screen
3400 for 3Dmark and 3360 for Spi
My Neo2 did 355MHz stock cooled with 3x LDT, nice board you got there OPB. :slobber:
http://home.no.net/comerade/pc/355htt-neo2.png
Kam> nice stuff I likes ;) rock that HT bus speed
:D @Kamerat :
Nice HTT dude - but 177 mem frequency seems a bit low - what's Your RAM ?
:toast:
Thanks :toast:, running Corsair XMS3500 2x256MB (BH-5), but didn't try to max it when I was testing for highest HTT. It's doing 272MHz with 3,9V and 2-2-2-6 timings. The Super PI in my sig was done by using this RAM.Quote:
Originally Posted by HARDCORECLOCKER
:D @Kamerat:
Yep - You use the 100 divider but try 133 - that results in a mem speed of 236 which is quite easy to to for BH-5.
MUST bring an improvement of performance to You.
If You are able to try other RAM with TCCD You can use the 166 divider - results in a mem speed of 295 which are most TCCD doing with 3-4-4-8 or if You get a good pair of them even with 2,5-3-3-5.
:toast:
The most optimal setting must be the "166" divider and a mp of 9,5x, that will give a RAM divider of 12 and let me run the RAM at the same speed that I'm running now. If the Neo2 had the "150" divider I could have used a mp of 9x or 8,5x and get a divider of 12 on the RAM.
:D Yep - You'll have to go for DFI NF4 - contains all the nice dividers we are looking for.............Quote:
Originally Posted by Kamerat
:toast:
hardcore whats you batch number on your week 0442 chip??
J40050 for exapmle?
:confused: Hey dude - not easy to answer - did't notice it before mounting my prommy on it............ :dammit:Quote:
Originally Posted by choseone214
I'll take a look at my receipt - in a few hours - I'm still at work, hope it shows the batch number.
:toast:
:D Didn't find it on the receipt but on the box, its K40112.Quote:
Originally Posted by choseone214
:toast: