Here you go!
Many thanks to Franck :toast:
Printable View
Here you go!
Many thanks to Franck :toast:
Onepagebook
Any preliminary results?
Man... just trie dit out and now I know for sure my PCI frequency increases everytime I increase the HTT.... can't figure out how to lock it.
works fine to me..(MSI NF4 ultra) pci-e and pci all lock :DQuote:
Originally Posted by IvanAndreevich
Woot... will give it a shot... :) PCI-E was locked on all front before anyway so time to test how well VX scales on divider now :)
PS) Works wonderfully... will have to test to see if it goes over 290 now :)
This seems to concur with the warning you get everytime you run nTune which says something like the following: "Your PCI clock is currently set to track the HT bus. blablabla..."Quote:
Originally Posted by quicksilverXP
Will this cause the inability to go beyond 240-250 HTT which has been reported by several users?
Have tried setting PCI-E bus to 101mhz when you start on bios? I just did it as precautionary measure as well as FSB 201mhz. It seems to be trend to unlock on many mobo recently if you don't oc it from bios slightly. Anyways, with 1003-03 or 1003-04 bios, I haven't seen any unlocking issues :) Playing with many things now.... where is my mach II ?)
Trying to move the clock just crashes my Asus A8N SLI, and it shows the PCI clock going up with the memory :( - I didn't think it was locking! Not suprising I can't get past 230! I'm just suprised I have an O/S left! Thanks for the link though OPB!
Quote:
Originally Posted by :banana::banana::banana:in
you tried it with the new beta bioses?
Onebook, are you sure the PCIE-16x slot is being locked on the MSI?
Tried it with ALL bioses - 1003.004 doesn't agree with my system at all! 1003.003 is slightly better. I think both of my boards are RMA fodder - but for two of them not to lock?.... Must mean something.
Hi,
Hey OPB are you sure this clockgen works well??
I am aware of the htt multiplier problem on my a8n-sli when you save and exit the bios (doesnt really save the htt) so I lower it using ntune to 4x and then lower the cpu multiplier using clock gen. Until then all goes well so I am at 10*200 then I up the fsb to 240 and it locks up my system. When I do the same thing using AI Booster everything goes well.
I am now priming at 10*240 with my fx-53 using ai booster, 4x HTT and it seems to work for now.
Any suggestions??
LMK
Mcklain
Quote:
Originally Posted by xgman
Yes I am 100% positive :)
http://www.devilsword.com/ms7125/nf4cg.jpg
Ok, I see
The thing is that clockgen works for me after I make the settings using Ai Boster.
If I set 10x240 using ai booster there is no problem. After that I run clockgen and I can get the correct values with the pci at 33.33 etc.. But If I try to make any changes in clockgen it just freezes. So I am stuck using AI booster.
Mcklain
Thanks OPB! :)
Very nice Onepagebook. :toast:
available since saturday :toast:Quote:
Originally Posted by Onepagebook
We has asked to him to create it :p:
I remember I emailed him long time ago and ask if he also can have 1.27 CPUZ showing 1t or 2t CMD when showing the RAM timings.:D
Thank you very much Cpuloverclock :)
1T / 2T would be nice.. I see so many people asking if it's 1T or 2T when a screenshot is posted.
Just so people don't think I'm mad, here is a screenshot of the lock not working. Note I had to set the O/C with ntune, as clockgen will just crash!
link
same here... ntune works, clockgen not. (a8n-sli)
But at least now i can set 1.65vcore instead of 1.6. :)
Hmmm this is most odd, I can run the giga -9 fine at 300*6 (wanted to test that the MoBo was capable) in the bios but ClockGen shows the PCI-bus increasing when I up the fsb....
More testing required I think :D
jF
Hi,
Thats what I am saying. It seems that Clockgen works with the MSI but not the Asus.
Mcklain
A guy at anadtech has posted a clockgen screenshot showing it working OK with his Asus A8N SLI...
There is also alot of people on the Anandtech forum showing that clockgen doesnt work properly also.Quote:
Originally Posted by :banana::banana::banana:in
Mcklain
Yeah I know - I'm one of them :) Glorfy is my alter ego :) I'd change my name here if I could. It seems that there is more than one A8N SLI board out there, or maybe there is some set up issue that we're missing?Quote:
Originally Posted by Mcklain
Hi guys,
From my experience using clockgen with my A8N-SLI I have seen clockgen incrementing my pci bus when I slide the htt slider and I have seen clockgen not incrementing (staying at 33.33) my pci bus when I slide the htt slider.
It seems that If I boot at stock settings into windows and try to increment the htt in clockgen my pci bus doesnt lock.
If, on the other hand, make a small overclock in the bios, lets say 12x208, then it seems that It locks my pci bus in clockgen.
This is all pretty weird.
Mcklain
I think it is staging the pci bus in various increments somehow from what I have read.
YOU sir are a genius! :toast: :D :hug :kissQuote:
Originally Posted by Mcklain
Hahahahaha I was having so many issues with setting an O/C in the bios I didn't even think of this! I set the FSB to 201 in the bios, and it shows this:
http://premium1.uploadit.org/glorfy/lockworking.jpg
Hi,
Glad I can be of help here!!!
Now lets all overclock these boards
Mcklain
DAMN! I was a bit premature! Although it says that its locked, I'm getting programs crashing, mozilla exiting bsods etc at 10X240. I'm sure all my components are good for more than that! I'll do some more testing! But thanks anyway!Quote:
Originally Posted by Mcklain
Hi,
I found that if you set you HTT to 4x or 3x in the bios it doesnt save youre settings in windows.
I use Ntune to modify the HTT in windows to 3 or 4 x.
Try that if you havnt already.
LMK
Mcklain
HI,
Well I just tried the beta bios 1003-0003 and it partially corrected the LTD problem.
I really dont understand the crappy Asus bios. Now with this beta, the HTT works, but when I try to boot at lets say 12x208 I save and exit bios and on the post it says that my ram clock is 202?? Whats up with that. When I arrive into windows, everything is ok and my cpu is at 12x208.
I am really fed-up with this boards bios.
I think I wont try any more overcloking until Asus makes available a completly working bios.
Mcklain
Hehehehehehe!! See the beta bios thread! I can now get to 290!!! Set in the bios!!! Something totally changed after I followed your earlier recommendation Mcklain! Woot!
Doesn't clockgen works only for a precise model either MSI xx or ASUS xx?
Im thinking maybe, because I am having huge problems with freezing on my chaintech...Quote:
Originally Posted by FallenAngel
hello all , i ve used clockgen NF4 on the K8NXP-SLI and it work fine , but the only problem is i can't push more than 6 Mhz FSB at once time , if i don't i have a freeze.
Do you have this problem , or i've a wrong setting ?
I Had the same thing on my A8N-SLIQuote:
Originally Posted by misteroadster
If I went too far too fast on my GB Ultra I experienced the same thing with the NF3 clockgen.Quote:
Originally Posted by misteroadster
FWIW
m
I experience this with AIbooster,ntune, and clockgen. I have to move in small steps, else freeze.Quote:
Originally Posted by muzz
Even with the SLI version?Quote:
Originally Posted by Onepagebook
yes but here , too far too fast is exactly 7Mhz FSB and freeeeeze :DQuote:
Originally Posted by muzz
With Clkgen NF3 and my K8NSNXP 939 i could do 201->270 easily.
Hi,
version 1.02 should solve the freeze problems.
Please check it out there : http://www.cpuid.com/download/CG-NVNF4.zip
Franck