Printable View
Yesterday I got my new toys, so now I've following
setup:
Intel P4 3,6E SL7Q2 1MB LGA775
Abit AS8 i865PE
2x256MB PQI 3200 2225 @ 1:1 2335
The setup was 100% aircooled, CPU heatsink was the boxed one with
a Vantec Tornado above.
Patched SPi:
http://img140.exs.cx/img140/3734/64wu.jpg
Highest Shot:
http://img140.exs.cx/img140/9099/92uc.png
prime stable ? :)
Nah. It was gamestable @ 4,25Ghz 1,5V Idle... I've never tested prime, I don't like it.
Yeah... I can see why overclockers don't like Prime95... it's a nightmare (somewhat like exams day). :D
Pretty low clocks there... :(
not bad :slobber:
very nice :slobber:
You gonna try higher volts and/or different cooling? :confused:Quote:
Originally Posted by Firefoxx
Yeah...I'll try on my Mach2 r404a but it broke down a few weeks ago, so first I've to recharge it with new Gas...For 4,68Ghz I already used 1,7V
Damn 4.68Ghz Oc with box cooler... 5ghz or more with Mach2 :D
Hehe... I could improve my results a little bit...
http://img62.exs.cx/img62/1865/115he.png
Waiting for phase change results :D. Amazing what clocks this CPUs can achieve with air cooling. 7 months ago I need dry ice to get my 3.2 Prescott to 4,8ghz :eek:
looking good there.. if only 560Js made their way down to OZ heh
nice job Firefoxx and nice cpu :YIPPIE:
throtling?
Gee......some ppl are lucky and get those E0 ones.........Nice O/C M8........Keep on and put it on the Prommie......We want subzero temps........ ;) :D :toast:
omg, amazing no doubt
Quote:
Originally Posted by cold_ice
Yeah...just a few days till my prommie will be ready...Just finished my S775 Mach2 selfmade Kit. Hope it will be okay.Quote:
Originally Posted by hipro5
Never had problems, just my old P5P800 throttled if I used a higher FSBQuote:
throtling?
then 266. :mad:
First it was the same in germany, but now 570J and 560J are available. :banana4:Quote:
looking good there.. if only 560Js made their way down to OZ heh
Firefoxx!
Eagerly awaiting phase change @1.7v numbers! :shrug:
Both highest shot and bench-stable, if you please. :confused:
piccies of the selfmade LGA775 kit please :)Quote:
Originally Posted by Firefoxx
Can AS8 unlock your 560J? It's a 04B (performance spec).
@uclajd I sold the 3,6E0, today I got my 3,8 E0 ;D
@eva2000 here we go
http://img63.exs.cx/img63/3996/imag00800ry.jpg
@ar Yeah it can unlock 14x and 18x Multis both worked perfectly...
Wow, I'm now eagerly awaiting results on this if you just picked up a 570J E0 and will be strapping it into the Prommy.
i MIGHT be able to strike up a deal with someone to get my hands on a 570J E0 ES.....and with the chance that I'll be getting a Vapochill LS for a ridiculously nice price at the end of the month....It'd be nice to see what you can do with yours.
Also, kinda offtopic, but I had heard ppl having issues with 570J E0's and the 19x multiplier not working on the DFI 875P-T....any confirmation on that?
Quote:
Originally Posted by Cornelious0_0
Yeah, I'll use my Abit AS8, because of the DFI probs with the 570J...
I suppose I could go that route too......just kinda had my heart set on the DFI. :pQuote:
Originally Posted by Firefoxx
Oh well, maybe things will get cleared up by the time I find out if I'm getting the 570J or not. ;)
Mind downloading ThrottleWatch to see if its throttling at that speed?
http://www.panopsys.com/throttlewatch.htm
Hmm, I just cleared 700Mhz on my XT-PE with regular h2O sitting next to a window with the card idleing at 16C.....load around 25-30C.....really tempted to wait and save for an FX-55 now to see what my baby can do with the right CPU behind it. ;)
Firefoxx, is that sealstring then a blue neoprene/foam layer in that pic ? I have a Mach2 stock too lying around hehe
First there's sealstring, then a layer of cork and then neoprene, yes. When I mounted the Mach2 I only added sealstring. That schould be enough.
cork?? = sealstring ???
may i ask what length and diameter bolts you're using ?
Panopsys is the new employer of Franck DelattreQuote:
Originally Posted by DanIdentity
Cpu-z, clockgen, I848/865/875 tweaker and Trhottlewatch are powered by him
Quote:
Originally Posted by eva2000
Erm...how shall I put it...They are two different materials, sealstring and a harder cork, it's harder then the sealstring. Difficult to explain :p:
The Bolts are about 6,5cm long and 2mm thick.
thanks Firefoxx :)
No problem...^^
well when you will bench???
I just set up my 3,8E0 Rig, but my mach2 is still not ready...so just air, I could do 4,65Ghz on air, I'm a bit fed up, cuz my 3,6E0 did 4,75... :(
why mach is not ready???
well, i think that these processors under LN2 are ables of 6gigs or more!!!
Cuz at the moment my mach has no gas in it, that's why I can't use it.
Quote:
Originally Posted by Firefoxx
same problem for me, waiting for HVAC shop opening for some 402 or 404....
4.65 is a max screen??Quote:
Originally Posted by Firefoxx
I have ever seen 4785MHz benchable in air :confused:
http://img150.exs.cx/img150/9773/44154em.jpg
http://img150.exs.cx/img150/8452/46927mk.jpg
That was with an unmodded Abit AS8, unfortunately I couldn't manage more than 4692MHz...
on air ?
sure...boxed cooler..
Vcore? :confused:Quote:
Originally Posted by Firefoxx
1,55 to 1,58V real Vcore, my vcore was set as 1,7V...
have you got a dry ice container to use with this processor???
Yeah LN2/DI Container a friend will do for me, won't he Cold_ice ;) ?!?
But I already sold the processor again, I'll get another one, cuz I'm really fed up
with this..
lol, when you whant to give me one for free call me :D
Shi(f)t...........I wish you luck with your next one.......... :)
I'll work hard this weekend :DQuote:
Originally Posted by Firefoxx
Impressive.Quote:
Originally Posted by Firefoxx
1) Do they have droop or just undervolt? :confused:
2) What is max vcore bios setting (478s usually can't go above 1.6)? :confused:
1. Nah, it just undervolts so hard...
2. The Max is 1,75V, but this didn't gain me one MHz..
:confused: Why'd you sell it? How much? I didn't see a listing in the classifieds? ;)Quote:
Originally Posted by Firefoxx
What was the max stable OC on that?
Why, cuz, It oced less than my 3,6E0! I sold it in a german forum, i think none want to pay the shipment from Germany to USA. How, much, well, 30$ less the price I bought it.
Max. stable was about 4,3Ghz..Sad...
this proc looks like fun
is it good in any 3dmark benches mebe 05?
Now this is interesting. Is the 3.6 a 560J? That's more my price range anyway.Quote:
Originally Posted by Firefoxx
It is a 560J..yeah...
@blinky I never ran any 3dmarks with this proc.
ASUS P5P800 has no fan on NB heatsink. I bet it's sizzling hot at 266fsb. This is probably what makes the difference.Quote:
Originally Posted by Firefoxx
why you don't try the DFI???
I was wondering the same. :confused:Quote:
Originally Posted by Malachia
because of that infamous 5:4 divider issue?
I thought they had this fixed with the latest bios? Or maybe I heard they were working on it.Quote:
Originally Posted by ar7786
I think that they still encode the 5:4 issue plus the 19 multi as for P4 3.8 CPUs........
At the moment I'm quite happy with my AS8, 315MHz FSB max. is in my opinion a lot for a i865PE, although I can enable "Street Racer" for Pat. If the DFI won'T have a working 19x Multi & 5:4 Divider, I'll go with the AS8.
nice oc with the 560J. cant imagine what these thing would do under a cascade :rolleyes: greets to bavaria :toast:
btw. where do you buy your pc stuff normally?
hehe, I would say the biggest part of the E0s are able to reach 6 Ghz under a cascade.
I buy most PCstuff at mix-computer or atelco.
think so too, hope that the mainboard-makers could make the 19x-multi working . then should we see some great new records from "theStilt", "fugger" and the others.Quote:
Originally Posted by Firefoxx
i dont like mix-computer, very high shipping-costs. but the rest is very cheap. was the cheapest shop (without shipping) for my barebone.
@Firefoxx do you remember the FPO/BATCH of your P4 3.8 CPU that didn't do well....?......Thanks....... :)
It was a SL82U Stepping, but don't remember anymore.
Hehe...great work, looks sexy :slobber:
At the very least yes.....it does. :slobber: :slobber: :slobber:Quote:
Originally Posted by Firefoxx
for dry ice only is better with no holes on the top ;)
alchool is a bad warm conductor...
It's for LN2 :)
And I doubt that the holes are bad when you use the container with dry ice.
well, for LN2 is perfect!
not bad, but better without with dry ice, but with LN2 by far better with holes, also i have done mine with holes ;)
Here is my 560J results with dryice cooling... but im not contented :(
5:4
http://www.oc-rapid.com/pics/560J/5150.JPG
1:1 " i love DFI "" CPC on " :toast:
http://www.oc-rapid.com/pics/560J/268.JPG
Woho...nice results...
really nice!!!! i hope that my 530J will hit 5ghz the same, but i don't think that AS8 will take 340mhz FSB :(
maybe with hipro's full mod :D
anyone have guide for VAGP mod for DFI 875P-T...
it's a bug ;)
DFI doesn't goes highter than 290 circa in 5:4 and 3:2
Seems like my 560 D0 still rocks with DI . with air ist stabile @ 4200-4300Mhz but with DI ~5200Mhz
E0s are good...good one
VERY nice D0 you've got there Mauri. :D
now i drive more dryice test and superpi 8m goes 5275mhz :D
i post pictures when my tests are ready