Printable View
Mobo: MSI K8N Neo2 Nov released version, BIOS 1.37 mod
Mushkin 3500 lv2 3500 BH-5 0341week
OCZ DDRbooster 3.9v
That's all I can do for the max of my system. :)
hope it helps some friends got question on Neo2 and BH-5 :toast:
DDR575 2-2-2-2 on sandra
http://www.e04hardware.com/record/bh5ddr575bw.jpg
For PI 1m
http://www.e04hardware.com/record/bh5ddr575pi1m.jpg
I am speachless - Bh5 still is the number one king.
*edit . spelling
that are some great results
this is pretty damn impressive, onepagebook!!! i just ordered Winnie 3200+ / Neo2 / OCZ Booster and if any of my BH-5 won't hit 280 it's gonna be ALL on you :p: :D
It seems that the new neo2's like onepage and I have oc like mad with bh5. Lets hope the trend keeps up. Sadly I dont have any bh5 to test in mine.
then if you hit 280, you gotta send me whole turkey.. :DQuote:
Originally Posted by bachus_anonym
i wanna see some 300mhz 2-2-2 again! :D didnt tom holck reach 300mhz? who was it again? cpuplloverclock?
oh believe me.... i will pull all of my BH-5 stock to see if the trend continues :)Quote:
Originally Posted by MaxxxRacer
you got it!!! i'll keep you informed on the progress :)Quote:
Originally Posted by Onepagebook
Does that board run BH-5 AND TCCD both well?
I have both ;)
280:eek: 2-2-2 Stable! My max was 260 2-3-3- unstable Ok 3,3V no booster.
I really wish the OCZ booster was compatable with more things :(. Amazing timings / fsb :|
wow my max is 275 with my bh5
cpuloverclockQuote:
Originally Posted by saaya
I think he reached somethig far above 300Mhz...
but not benchable.
cpull is crazy, it says in his sig hes run like 4.8 vdimm
and 7v +5 and 2.6vagp
He ran his 3.3 rail at something like 6.7V, I don't like going above 4.5V on it. He is probably one of the most extreme people here, just with a limited budget.
What's the max vdimm people run BH-5 at 24/7?
Around 3.6-3.7.
Stupid question perhaps - any certainly wrong section - but it seems like the best memory timings/speed with BH5 always are from people with Subzero cooling.
Does the fact that the memory controller is part of the CPU play into this or is it simply a case of correlation?
BTW - Awesome work with the BH5!!
:toast: :banana: :toast:
Very nice :toast:
You used 2T @ sandra bench?
guys stay tuned for next week ;)
something terrible coming from Italy :eek:
i am really looking forward to how this OCZ ram ( in my sig) is going to work in the Neo board. I've been seeing some really impressive scores with BH5 ram. wicked scores man :)
Seen any 8.6k Sandra buffered, with 2t enabled lately? ;)Quote:
Originally Posted by KuRi
Quote:
Originally Posted by KuRi
Sisoft always read that CPC incorrectly
2t can't get over 90% efficiency :)
EDIT: thanks onepagebook, sandra shows it wrong.Quote:
Originally Posted by The Stilt
KuRi it's 1T :>
god this makes me want an A64 sooo bad...
i have 2x512 bh-5 and i have 2x256 bh-5 and i have one stick of bh-6 512mb and i dont have a single rig that can run over 240 FSB :(
im hoping once my new psu comes in ill be able to get more juice out of my infinity...
Quote:
Originally Posted by Onepagebook
then u r saying that in 1t u get over 90 % ?
at lease over 85% most of the time
wouldn't a higher tras provide better bandwidth scores? I'm think that running 2-2-2-2 timings over say, 2-2-2-5 may actually hinder performance as the ram does not have enough latency for it's other timings to work properly. Hence you may be wasting cycles.
i get on the asus P4C800-dlx 72-73 %Quote:
Originally Posted by Onepagebook
or what u said is only for AMD's ??
Hi guys!Quote:
Originally Posted by whatever
I was wondering the same question. I'm and Intel user and I'm not up to date with AMD CPU's as of late, but I'm planning on getting an A64-fx system by January or February when the new stuff comes out. I'm researching now. :p:
I have a pair of BH-5's that can do 250 @ 3.4v 2,2,2,5 and a DDR Booster. I had read (a long time ago before I bought my current rig) that there were A64'2 dying because of high voltages. Is this still true?
Thanks for any info you guys can give me :toast:
Were any mods required to get up to 3.9v with the booster + Neo2? I'm wondering because I'm getting a DDR Booster soon and I have a Neo2.
New revisions dont seem to be suffering from the same problem that the old clawhammers did, REDKEN.
It could have even been a motherboard issue..
Nobody is really 100% sure ;)
Wish we could get an official word from AMD on what the problem is and if they have fixed it or not..
Onepagebook, try CL1,5 :)
my best is 275MHz@3,7V (1T, Dual Channel)
http://www.hot.ee/winchester/pifast-275x10-42,72s.PNG
3200+@2755Mhz
Hype6
MSI Neo2
arcooled system
yup thanks Jaan, I have tried around 277 for 1.5 w/o any problem but bench about the same w/ CL=2;)
that was only an issue with the shuttle AN50R, afaikQuote:
Originally Posted by REDKEN
Thanks for the reply. So, right now people are feeding as much vdimm to the boards as their particular RAM can get? (just to be very sure :)) In other words I can feed 3.6v to my RAM (which can take it) and not have to worry that my CPU is going to die, right?Quote:
Originally Posted by STEvil
Tanks for your reply too blinky!
:toast: :toast:
onepage can you told me how much in fsb tours rams get at 3v???
What kind of cooling do you have on your BH5?
Mine don't go any further than 260mhz 2-2-2-5 @ 3'7V with an 8cm fan blowing on them :mad:
Maybe your BH-5 ic's CAN'T go any further. Try to give them 4v and try.Quote:
Originally Posted by wambas
Your Processor was a northwood, right? By air you may have troubles to pass a determined number of mhz/fsb, who knows... (vamos, q tu micro puede q no de para mas :) y aun espero mi ys-tech y el adaptador xD)
Besaid spotted!Quote:
Originally Posted by BeSaiD
I've got a 2'8C M0 capable of 14x250 @ stock volts.
And well, the OCZ DDR Booster won't give me more than 3'7V, duuno why :confused:
I've got 2x256 Corsair XMS3500 V1.1
I'm using 2-70mm fans right on top of the RAM via a custom bracket I made and have 2-120mm fans on the side of my case feeding the 70mm's.Quote:
Originally Posted by wambas
Is that 3.7v used 24/7?
Nope, 3'5V for 24/7 :D 240mhz 2-2-2-5
could that chips be bh-6 :DQuote:
Originally Posted by wambas
I thought all Corsair XMS3500 V1.1 were BH-5 :confused:Quote:
Originally Posted by X-GeN
hey Jaan,
here's the same run as you did, only difference is sc (s754) and better timings. dc makes alot of difference. Also aircooled btw
why does your screenshot say gskill ram, and your description say mushkin bh5?
That is one sick overclock.. My god..
I have some 273MHz BH-5 (on NF2) here somewhere. You make me wanna buy an A64 rig just to test the ram on it :D
Quote:
Originally Posted by Evil_Spork
Nice finding evil_spork, that's some sandra bug
:p:
Quote:
Originally Posted by HaLDoL
where?
that's my computer name, watch it very careful! :p:
if you wonder, just see yours and check it out!
Did you see the "run ID"(computer name)
Does Sandra give you what's the name brand of your RAM? I don't think so ;)
Edit: So..Did you hear about XtremeSystem as name brand of memory? According to the screen shot below? :D you can change whatever name you want for your computer name from the properties by right click your "my computer" Icon. ;)Quote:
Originally Posted by Onepagebook
http://www.devilsword.com/runid.jpg
no corsair xms rev1.1 is bh-6
So definately mine are BH-5 as espected...
Any tips? :shrug:
"249we" 2.0-2-2 3.45v 250mhz (corsair xms 3500 256mb@???)
"250we" 2.0-2-2 3.45v 250mhz (corsair xms 3500 256mb@???)
"252we" 2.0-2-2 3.60v 265mhz (xms 3500 256mb@nf3)
Theoretically mine should be one of these 3 :stick:
oh my bad i thouhgt you said 3200 1.1, which is bh-6, yeah you have BH-5 :)
&*^% me that is an insane oc!! nice one.. 8408/8250 :thumbsup: