Printable View
msi k8n neo2
90nm 3200+
GSKILL TCCD
air cooler:HYPER 6
It's 0433SPMW 90nm 3200+. :p:
http://my.so-net.net.tw/xu1060/G20.JPG
http://my.so-net.net.tw/xu1060/G33.JPG
http://my.so-net.net.tw/xu1060/G43.JPG
http://my.so-net.net.tw/xu1060/G46.JPG
http://my.so-net.net.tw/xu1060/G16.JPG
http://my.so-net.net.tw/xu1060/G47.JPG
why no sandra benchies ?
nice. almost 3ghz suicide shot on air with 50% overclock. 90um is getting better fast!
:eek: :slobber:
WTF ?!
3Ghz on Air.
These new S939 CPU's are hot !
I'm so happy thta I have Birtday in 12days and then X-Mas :D
WOOHOO
nice cpu... my doesn't want more than 2,6 @ 1,55v on water..
with high volt even 2,7
WOW where can i get that stepping :D
Damn I had one of those and gave it away without prior testing :(
don't be sad ;)
i've the same stepping and i can't get over 2550MHz doesn't matter with what voltage ;)
but mine can do 2500MHz @ 1,55V primestable.....
so, i think i'll RMA my CPU and hope that i get a "good" 0433SPMW ;)
Thats some nice numbers! Will buy a 3000+ I think.
What's it run Prime95 stable @ and for how long?
Peter, was this a retail boxed 3200+ or an OEM?
It's a retail box :p:Quote:
Originally Posted by trans am
That's what I thought. retail boxes will be newer yields, and should oc higher. oem comes out first and don't oc as well. then the retail boxes come out and they rule! Does this sound legit or am I just blowing fvcking smoke?
Here is my 3200+ 90nm result: http://medlem.spray.se/athlons/32.JPG
Its allso on air :)
Is that also a retail?Quote:
Originally Posted by Nextro
Yep :toast:Quote:
Originally Posted by trans am
Quote:
Originally Posted by TEDY
Is that really important? I never seen yours before! :p:
I already planned on buying one... but now I have no doubts left :D :thumbsup:
Just ordered one of those too :slobber: , with the Asus A8V. I think 3Ghz will be easy with my Mach II :banana: :banana4: :banana:
OMFG, Great speeds..
This is getting outta hand . I like it :D
Somebody should PM geforceti4200 ;)
Looks like my wait for 3GHz is drawing to a close ;) one question: how the heck did you get 300MHz 1:1 on your ram? I know of no such ram thatll do 300fsb, especially in dual channel. If this was bh5, it would be 2-2-2-5 at like 4 volts! could it be some sort of pc4200 ram? then it would be 3-4-4-8 timings! God id love to own 300x9 winchester 1:1 this would get me some VERY good 3dmarks and gaming performance! 300x10 is even better!!!!!!!!!!
hey im looking to that screenshots and i see that you cant change multipliers O_o! so you can change the multi between x and 10?
geforceti4200:
He´s using Gskill TCCD ;) You might want to consider these along with your next cpu cause you dont need soldering to get in the "higher than normal" speed area.
It's not all that great, my 0.13µ Clawhammer does also 2750Mhz on air.
http://kaine.studentenweb.org/superpi1M275.jpg
Not much of a performance gain (if there is) for winchester cores.
Hm I´ll say a second or two ;)
http://my.so-net.net.tw/xu1060/G16.JPG
so your winchester does an amazing 55Mhz more than my old and big clawhammer, is that all a 0.09µ core has to offer? The 2 seconds come from dc, not from your oc.
I'm just saying ... everybody is going mental over these winchester chips but aren't exactly a great improvement.
Did you do it on air?
3200+ and an MSI Neo2 is close now :D All stores are out here in Sweden :(
Quote:
Originally Posted by JDizzle
good point. I think considering most are hitting high speeds at only 2.6v on air, it is a huge improvement. Maybe it doesn't have the cache, but the dual channel seems to make up for it. It's also nice if you are watercooling in line with a gpu and cpu block. since the cpu is giving off lessheat, your video card can run cooler.
Quote:
Originally Posted by HaLDoL
props to you for getting a very goood CH
but whats amazing about these winchesters, is that 2.8 seems to be he norm on AIR IARIARI AIR ARI AIRARIARI AIR AIRAI HOLY AIR!
wow... klipsch 5.1 ultras or a winchester?! why must my birthday be tomorrow!!!
get the winchester retail box and buy some good headphones like Sennheiser HD280 pros :)Quote:
Originally Posted by ocmyface
Where to buy the retail box 3200+ winchester?
i think ill go with klipsch and give winchesters another month, maybe theyll keep scaling like this? 5ghz on air maybe? GF4? maybe? :D
torin: try monarchcomputers zipzoomfly or newegg
http://www.mwave.com/mwave/viewspec....iteria=BA20769Quote:
Originally Posted by Torin
just ordered mine today, $60 cheaper than newegg!!
http://www.newegg.com/app/ViewProduc...103-502&depa=1
Nice, I think I will order one very soon. I'll wait to see how yours works out trans am, then go ahead and grab one.
Also are you using the Neo2 Plat?
No, I will never own another msi mobo as long as I live.Quote:
Originally Posted by Torin
I ordered this, I am not sure if it is any better than the msi, but you'll know soon.
http://www.newegg.com/app/viewproduc...128-263&DEPA=1
Good luck with it. If you don't mind, could you PM me when you get it all together and see how it runs?
Mine winny needs 1.65 for 2.7ghz on water and is the same stepping. I have OEM though. Just bought it last week. I might try my hand at a retail and see how it goes.
BTW trans am, I am not an MSI guy neither, but the Neo2 is a nice board I have to admit.
I said winchester will be able to do 3GHz on air :P
Quote:
Originally Posted by Noktar
Please explain (or is it staring me in the face and i can 't see it???)
:confused: :stick: :shrug:
http://www.mwave.com/mwave/viewspec....iteria=BA20769Quote:
Originally Posted by mad mikee
Well, put it this way. How many 939 3200+ are there?
Quote:
Originally Posted by HaLDoL
I tend to agree.. But then again if your oc was done by air you´ve got a very very good CH. I think that these Winchesters would slightly increase their oc´ability.
But then again I could be wrong.
*edit : Its not my cpu so I cant take credit there.
DUH!!! :wierd: :am: :bsod: :brick:Quote:
Originally Posted by trans am
Did I mention I have a severe case of itsinfrontofmeitis?
Oh and buy the way - we all expect stepping info b4 you even take it out of the box :hehe:
Yes it was on airQuote:
Originally Posted by JDizzle
those GSkill RAM is certaining kicking it up a notch.
I should become a official retailer for GSkill in Canada. :D
nice cpu & oc peter lu :)
please, which type o gskill are them?
PC4400 ? DDR600?
i have found some different models :confused:
F1-3200DSU2-1GBLE
PC4400(DDR550) 2.5-3-3-7 PC3200 2-2-2-5
F1-3200DSU2-512LC / F1-3200DSU2-1GBLC
PC4400(DDR550) 2.5-4-4-8 PC3200 2-2-2-5
F1-3200DSU2-512LD / F1-3200DSU2-1GBLD (the cheapest one)
PC4300(DDR533) 2.5-4-4-8 PC3200 2-3-3-6
which of them have you?
thanks
byez!
And the air temp was the same it is in Taiwan? ;)Quote:
Originally Posted by HaLDoL
Well the 3000/3200+ winny also costs a lot less than a 1MB S754 chip, produces less heat, clocks clearly better (on average), has lower latency L2 cache and also DualChannel RAM.. ;)Quote:
so winchester does an amazing 55Mhz more than my old and big clawhammer, is that all a 0.09µ core has to offer?
3200+ OEM 10x275 1.65 vcore waterchill
0432SPMW
my tccd is old version.Quote:
Originally Posted by Sp@nk
but i think is
F1-3200DSU2-1GBLE
PC4400(DDR550) 2.5-3-3-7 PC3200 2-2-2-5
stable? :rolleyes:Quote:
Originally Posted by HaLDoL
Mine 3200+ does 10x250 @ 1,4 :D 3dMark, Superpi, cpumark and moviestabile, will test nfsu2 now. Did som screens at 2,6ghz with 1,475volts, I assume that I can lowe the volts, never tested superpi or something at that speed...
My Neo2 was @ 333HT Haven't tested more HTT at the momet becasue I am looking for an nice 24/7.
Edit:
I use an Stock cooler and my stepping is:
ADA3200DIK4BI
CBBFD 0433SPMW
1057936H40374
Got the same cpu :D But will try it tomorrow and see what it wants to do :D
Hello there, suppose this is as good a place to start as any!
I've only been trying for 1:1 clocks atm as the divider is too much of a killer on performance. This one primed for about 4hrs or so and never went over 52C load. Stock cooler and volts. I'm going to have to reformat over the weekend after corrupting windows with my fsb madness :eek:
The ram will do 2.5-4-4-10 280fsb at 2.7V then I killed everything heading towards the magical 300fsb and thrashed my OS :(
This is the first stable oc I achieved - primed for about 4hrs...
The rig is as follows:
Antec Trueblue 480W
Winchester 3500+ retail boxed
PQI Turbo 3200 2-2-2-5 1GB kit (platinum)
MSI K8N neo2 platinum
Gainward GS 2400 at 400/1100
Audigy 2 ZS
2x Seagate Barracuda hdd's 80GB 7200rpm 2MB/8MB cache.
MSI 52x/32x/52x CDRW
Plextor P116A rev 2.0 DVD Rom + other junk :p
http://members.boards.ie/tacticalanni/result1.jpg
3500er Winchester 0441
2550mhz boxed cooler 1.4v :D
i love that chip
mobo is k8n neo2
I love my 0433SPMW that makes 2.8ghz with box cooler :D
i havent tested beyond 2550mhz :) ill do this as soon as i get my watercooler. dont trust my 40 c as shwon in bios, although the cooler is really cold to the touch
that doesnt mean that the proc is cool ;)Quote:
Originally Posted by Huhn
very good, with better timings, you can crack 28sec;)Quote:
Originally Posted by Razor_cut
http://people.freenet.de/funkflix/3ghz.JPG
Watercooled! :)
:toast:
My 3500+ 0441 TPAW won't go over 2750 with the Alphacool NexXxoS block and 2 BI Xtreme rads... damn :(
I had the same week and stepping - wouldn't do 2.4 Ghz stable regardless of voltage. There is no consistency with these CPUs and overclocking.Quote:
Originally Posted by Kriller
But they run hella cooler than the clawhammers - or even newcastles - half the heat dissipation at the same speed.Quote:
Originally Posted by HaLDoL
you guys that use the stock coolers, just out of curiousity do you use the stock goop on the cooler or do you clean that off and use something like artic silver or whatever
i think its a waste of money if i would use arctic silver for that crappy boxed cooler. so just use that goop and ur fine.Quote:
Originally Posted by Sephir0th
Are you shore? I haven't seen any 0433SPMW that doesn't clock goodQuote:
Originally Posted by dnottis
Yup, positive. I've got a 3500+ now at 2.5 GHz using 278 FSB with the memory 1:1, primes for 12+ hours. I could get the 3200+ to 2.5 GHz and above but it wouldn't prime stable past ~2.350 GHz. I can run this 3500+ chip up to 2.6 GHz but it wont prime stable either for very long. Using OCZ 520W PSU, a 2 week old MSI Neo 2 Platinum - & Corsair XMS4400C25PT 1024 kit.Quote:
Originally Posted by Kriller
Sometimes I question what people here consider stable though. I could superPI 32m at 2.5 GHz with the 3200+ but prime would crap out within 10 mins. My idea of stable is prime for at least 12 hours because nothing else seems to test stability quite as much as prime does.
Hmm, have no time to prime, but I havnät have any errors in windwos and games so...Quote:
Originally Posted by dnottis