Printable View
Broke in the three stage cascade tonight and I broke my X800XT before I ever fired up.
So I went for sheer Ghz and some super pi (patched).
-110c @ 1.75vcore
Ran out of FSB and maxed out at 5.9Ghz
Benched superpi just under 5.7Ghz, I am sure I can bench pi over 5.7Ghz now. Dropped back from 5:4 to 3:2 ratio
CPUZ is incorrect on FSB speed, 18 x 328 = 5904
23 sek! nice speed :toast:
Sorry to here about the broken harware :(
I also broke my x800xtPE last week before I was going for 3DMark2001
(it was doing 35.7k at default speed)
WOW!!!Fugger, That's insane...100Mhz closing in for 6Ghz and 400Mhz spankin FSB.......AMAZING!!!!Congrats!!! :toast: :toast: :toast:
Nice clocks man :toast:
Sorry about your X800, what happened? :(
how on earth is that possible :p
Impressive!!! :slobber:
Nice clocks and insane FSB there :D
What kind of Vcore did that require?
how about running the real thing so we can compare??Quote:
some super pi (patched).
:banana::banana::banana::banana:e, thats mad FSB! And cpu clock with cascade.
Is that a 925XE board?
Awesome stuff :toast:
I cracked the core on the X800XT PE (real), I connected my old CPU cascade to it with a rather large c clamp.
25 second super pi @ 5.66Ghz unpatched. I already shut down and need to put the HD into another machine to get screen shots off.
The FSB is a mistake in CPUZ, the multiple is 18, not 14 and it bases its from Mhz / multiple it seems. The Ghz is correct on machine speed.
Mobo is a AS8 (max 400FSB)
:banana::banana::banana::banana:...
Whats the WR in superpi???
420FSB?! Damn thats insane...
Too bad about your X800XT-PE :(
5.7Ghz benchable?
Damn... Thats sick...
How much Vcore can you give the thing B4 it breaks???
1.8v?
Edit: So your running 18x315 or what???
I plan on going over 1.8v, this board has the hip chip and the mod should be the same as IC7's
I will break 6Ghz with 1.8v, currently with a weak 1.75v (bios) 1.72v (actual).
My FSB is not 400+, 327Mhz for the 5.9Ghz screen shot.
I have a backup X800 XT but it is PCIe
Ok... Still thats freakin insane...Quote:
Originally Posted by FUGGER
Is this a new WR??? How high did Macci get the P4 stable???
Damn... Grats again... Hehe... Your XTREME Fugger ;)
:toast:
Does the E0 chip like that much voltage? My D0's sweet spot's around 1.6v for benching... maybe I'm just not cooling it enough heh :D
1.75v 5.7G -110C at load? Sounds really nice! Me thinks 5.6G 3D mark soon :p:
5.7~5.8Ghz 3Dmark.
The more voltage the higher it went, and it wanted to go higher.
:slobber:
The E's are looking rosier by the minute!
and u can beat the WR of 6114MHz? Improve your 5.9G
OMG!!!
Fugger: Cant you use the Asus Mobo's multiplier unlock thing???
Imagine 5.8Ghz Benchable! :drool:
How much in 3dmark01 and 03 would that give????
and superpi??? 22 seconds???
Excellent work there fugger :D
goodluck on the 3dmark run if you can get a card.
Impressive cooling and clocking fugger! :toast:
cool down Mini and chill with the questionmarks! Anyway he´s running the patches version like it says 3 or 4 times in this thread. Fugger´s superpi is impressive 25sec.
WWOOOOWWW
makes me cry when I compare to my overclock.
congrats Fugger
By the way, are the E0 cpus out yet for the 478 socket or is it just the LGA775?
:worship:
Nice work ! Goodluck with 6ghz ;)
Congrats FUGGER, very impressive :toast:
i wonder if all the E0 can do the same?
another 6GHz soon? :D :banana4:
nice speed on that thing, :thumbup: ;)
nice man !
Might be able to get a 2.8 533 w/o HT in the E0 stepping and I have seen some 2.8 D0 clocking this high on LN2
Nice! :toast: Sorry to hear about your vid card. :(
only :slobber: :slobber: :slobber: :slobber:
Holy cheeses! :D
Congratz on the Xtreme OC
Really insane :slobber:
breaking out the birthday pressie i see :cool: literally @ -110C :eek:
23 sec. :P
Really insane.
Fug, what is the "hip chip" and the mod you are talking about? Is it a vcore limiter? I thought Asus limited vcore to 1.6v on Pressys. :confused:Quote:
Originally Posted by FUGGER
Pardon me NooBness. :am:
And the cascade is stable at -106C fully loaded. with ethlyene third stage, next R14 20 degrees colder at least....
Its still patched. He´s score is "still" an blastering 25sec.Quote:
Originally Posted by M.Yazıcıoğlu
Why did they make that stupid patch anyway..
wow, very nice. :slobber:
very sad to hear about your x800xt. if i did that i would kill myself.
:idea:Quote:
Originally Posted by bias_hjorth
haha wonderfull smily. Boy I was laughing for a moment there :D
anyway there´s a patch released that gives the prescott a few seconds. Why it has been maked goes above my knowledge: :)
ya is the multipier unlock in bios menu? :DQuote:
Originally Posted by Mini
Amazing, I had to rub my eyes a couple of times and read everything twice...too bad about the x800 though...
DPA- what's the word? How are things with the Ultra these days?
Yup its pretty much a test w/ prescott optimization and its also called 'SuperPi' for some very stupid reason. Has nothing to do with the Original SuperPi as far as I'm concerned.Quote:
I assume it's got an adjusted algorithm, which means it's no longer Super Pi.
Quote:
Originally Posted by µnrealneo²
Sorry to trash up the thread with off topic nonsense, but is that patch for all systems?
if so then superPI will need to get updated :\
its for prescotts only, and shaves like 2 sec. off the time with regular superpi. :rolleyes:Quote:
Originally Posted by Dissolved
outstanding. i want to see ya smoke the orb.
Holy Smokes FUGGER!
You're knocking on the LN2 guys' door with 5.9GHz on an evap! They better have some iced tea ready for company.
Never stops amazzing us does he?? :slobber: :confused:
SL7K9 = CPU of the gods..... 2.8A, E0.........
ouch!
C
what about mobile 3.33ghz.. E0 with 14-25x multis? ;)
Quote:
Originally Posted by charlie
There is also a version of superpi that works on a mac. the prescott has a few extra tricks that are program specific AFAIK.
Amazing clocks :D
Nice clocks :toast:
What can you run 3d03 at with that chip?
OPP
/me picks jaw off the floor
congrats dude! :toast:
Congrats goes out to Chilly1 for the great work on Cascade Cooling!!
Thanks Chilly for all your help and now your awesome benches. (Congrats also to your helper..) LOL :D
Nice Work Charles - Your Awesome Tooo and your overclocks are out of this World!! :rocker:
Here is a un-patched superpi, I will tighen up the memory more. This was done without PAT and 5:4 @ SPD 2.5-3-3-8
Also I downloaded CrystalCPU, the real time clock checker is also incorrect like CPUZ.
I found myself in bios and booting at insane speeds. Here is a pic of the bios. I know I know, what am I doing with my mem voltage not maxed out... Well with 3:2 ratio I didnt need max voltage.
The vcore is maxed out.
Opp: I expect to run 3D around 5.7Ghz
Volt modding the AS8, with 1.8v + I think 6Ghz and beyond is possible.
:slobber:
that's soooo excessive :D
C
Here is a pic of the cracked core. I put a jewelers loop on the lens of the camera and it worked.
ouch......
painful just to look at!
C
*tear*
i wont be seeing one of those for a while... probably... sad to see one go...
give the next one hell fugger :toast:
LOL, a guy tech savvy enough to be benching at 100 below zero with all those cascade contraptions holding a loop at the end of a camera to take a pic. :ROTF:Quote:
Originally Posted by FUGGER
Ironic, no?
Preposterous clocks though. :worship: And when you say voltage maxed out, what is maxed out?
The AS8 only goes up to 1.75v
I have switched out to the DFI 875P-T to see what it can do.
your gonna like that dfi.the quality of componets on those boards makes my ee fly. almost to fast to play ut2k4.
I think your NB needs voltage, without mods my AS8 goes aroung 290fsb 5:4
with vmod it goes up to 300, next month i get 560J and i order LN2, lets see what i can do...
nice results :toast:
very well done FUGGER!
i wish i had your bank account!!