Printable View
CPU: s939 3500+ 90nm
Mobo: MSI k8n neo2
RAM=?
RAM parameter: All set for 2.5-3-3-7-11
DDR624:
http://www.e04hardware.com/ddr600cl25/ddr624.jpg
from digital camera:
http://www.e04hardware.com/ddr600cl25/ddr624dc.jpg
other benchmarks over 300FSB:
http://www.e04hardware.com/ddr600cl25/ddr600.jpg
http://www.e04hardware.com/ddr600cl25/ddr611.jpg
http://www.e04hardware.com/ddr600cl25/ddr620.jpg
8686 pretty sick buffered bench. good stuff and keep on pushing for more.
Pretty close to 9K, untouched record to be broken.
Quote:
Originally Posted by FUGGER
first shot is 8730mb/s, your honor.. :D
dont find a word to say maybe divine bandwidth :toast:
Can u tighten more the timings like 2.5,3,3,5?
Quote:
Originally Posted by georgesod
Ya I think so ;) but not help much though :D
@Onepagebook Sorry for the off topic but the european site doesn't seem to work
Quote:
Originally Posted by georgesod
Would you please explain that more about"european site doesn't seem to work"
Thanks
In the official site up right you can choose your location and when i choose Europe it goes back to the global (headquarters)
wow, nice kevin! :toast: got a new shippment from overseas? :D
can you post an unbuffered bench at 300 2.5-3-3?
Georgesod, that 's because we 've not found any available distributor yet!
Sorry
Saaya, new shipment?nah...it's just normal DDR550 2.5-3-3-7 256mb sticks
ya, I can, but would you please teach me how to do it?
here you go Georgesod for 2.5-3-3-5 and saaya unbuffered DDR600 2.5-3-3:D
http://www.e04hardware.com/ddr600cl25/ddr600unb.jpg
thats very high for unbuffered, no?
unbuffered means uncheck all mmx sse sse2 and 3dnow optimizations in the options settings of sandra. did you do that?
or just run sciencemark, it shows other interesting things like the bandwidth with different sizes of data chunks and the memory latency for different sizes of data chunks. check it out :) i like it much more than sandra because it shows much more information :)
what kinda cooling do you have on that thing. IS that stable? 3ghz Winchester...man thats nice!
Quote:
Originally Posted by jjcom
I am using vapochill LS, I think it's pretty stable when I run several times 3d mark 2005.
does anyone besides me find it very interesting how easily the A64 with plain DDR ram can still out do the best Intel bandwidth shots from DDR2, when DDR2 is suppose to be so much better?
unbuffered = uncheck box #6-13 and #18 (i think it was 18....it's called "enable buffered blablabla" :D)
yeah remember when DDR first came out. It wasn't anything all that speical. Then it got better and look at what it can do :D. anyway...Intel doesn't have an ondie mem controller so that will make it score lower. Thats AMD bigest advantage. lots of mem bandwidth.
Quote:
Originally Posted by p4z1f1st
ya , thanks, so not just uncheck #18? :confused:
i think ill get some of this stuff :D
What RAM volts is that? If I missed it - sorry.
BTW, those who say 9K is untouched are very wrong ;) A dual opteron system with NUMA breaks 10K stock easily.
Quote:
Originally Posted by IvanAndreevich
I think he means 9k for non-dual cpu system or normal personal system ;)
right.....6-13 + 18 = "real" unbufferedQuote:
Originally Posted by Onepagebook
I will find time to test , thanks dude :DQuote:
Originally Posted by p4z1f1st
np ;)
btw: do you think (or maybe Oskar) it could be my CPU, which can't handle 2 512MB-sticks @ 1T and that high clocks like >275MHz and why i get thousands of errors @ memtest?
(i really hope, that the problem "goes away" when i drive my MSI + 90nm-A64 - but i want to get sure: the sticks which i bought are specificated like following, right? : 2x512MB @ 2.5-3-3-7-1T @ DualChannel)
right? :D ;)
Volts??
not over 2.85v
Quote:
Originally Posted by Onepagebook
will this be a new gskill memory line available in the USA anytime soon?
Quote:
Originally Posted by urbanfox74
You got PM ;)
That's nice. How much? :D
Sorry if I've asked this question before, but...
Onepagebook, How far will the 3500+ 90nm go ON AIR only (without the vapochill) on the same specs ??
@Onepagebook : please tell me your GSkill (LE/LF?), thank
I'd ordered F1-3200DSU2-512LE from HaNoi VN 160USD, nice price :D