Heard about what is Gskill memory? Here you go!

Forgot to say:
The designer of DFI LP UT NF3 250GB, Oskar Wu,
he used to beta test the board before it was released by using this Gskill RAM and cracking the speed up to DDR700 or more!
It's based on Samsung's Tccd IC:
All you can see are 512mb modules
As the configuration on the sticker they mark,
I and my friend have done all the tests exceed the limit already.
Please see all the tests below:
RAM : 512 modules:

http://www.e04hardware.com/Gskill/gskilltccd.jpg

All the tests:

http://www.e04hardware.com/Gskill/gskilltccdtest01.jpg

http://www.e04hardware.com/Gskill/gskilltccdtest02.jpg

http://www.e04hardware.com/Gskill/gskilltccdtest03.jpg

http://www.e04hardware.com/Gskill/gskilltccdtest04.jpg

http://www.e04hardware.com/Gskill/gskilltccdtest05.jpg

http://www.e04hardware.com/Gskill/gskilltccdtest06.jpg

http://www.e04hardware.com/Gskill/gskilltccdtest07.jpg

http://www.e04hardware.com/Gskill/gskilltccdtest08.jpg

http://www.e04hardware.com/Gskill/gskilltccdtest09.jpg

http://www.e04hardware.com/Gskill/gskilltccdtest10.jpg

of course, how about 256mb modules?

here you go:

http://img83.exs.cx/img83/9895/53-3.jpg

Whoa!
310 2.5-3-3 DC ! :toast:
Thats some good stuff indeed.

Can you run 3dmark2001? would be interesting to see the lobby hi results w/ those clocks. :)

just being curious... you're a Chinese right?

Quote:

---

Originally Posted by dav

just being curious... you're a Chinese right?

---

I am NOT Chinese but TAIWANESE! ;)

how come you dont run 3d at the 3.1ghz that your FX can do?

and those mems look nice, do you have any BH5 to compare to, to see what speed @ 2-2-2-10, the 310 @ 2.5-3-3-5 compares to?

Quote:

---

Originally Posted by blinky

how come you dont run 3d at the 3.1ghz that your FX can do?

and those mems look nice, do you have any BH5 to compare to, to see what speed @ 2-2-2-10, the 310 @ 2.5-3-3-5 compares to?

---

oh..for the DDR620 , that is for 256mb two sticks, too bad, I am in US and I don't have that ram yet...
BUT for 512mb dual chanel, I have done this for DDR 545, can ADATA DDR600 do that? :D
http://www.e04hardware.com/coolalerb...546prime95.jpg

:slobber: extreme nice at the first sight.....but which of that benchies are made with 1T?


and one question: WHEN CAN WE EXPECT THE RAM IN THE STORES!?! :slobber: :slobber: :slobber: (especially in europe/germany ;))

Looks like decent RAM. I'm looking at the G.SKILL website. It says:

"Our customer base is considered as a worldwide range:

- USA
- Europe: Germany, United Kingdom, France, etc.
- Asia: Hong Kong, Malaysia, Singapore, Japan, Korea, etc.
- Middle East: Dubai UAE, etc."

The customer base may extend to the US, but I don't recall seeing this RAM at any of the resellers. Or is that about to change? :D ;) Also, I see a North American sales coordinator. Is that you (onepagebook) by chance?

Quote:

---

Originally Posted by sierra_bound

Looks like decent RAM. I'm looking at the G.SKILL website. It says:

"Our customer base is considered as a worldwide range:

- USA
- Europe: Germany, United Kingdom, France, etc.
- Asia: Hong Kong, Malaysia, Singapore, Japan, Korea, etc.
- Middle East: Dubai UAE, etc."

The customer base may extend to the US, but I don't recall seeing this RAM at any of the resellers. Or is that about to change? :D ;) Also, I see a North American sales coordinator. Is that you (onepagebook) by chance?

---

Few days later though...
why do you think it's me?lol

Quote:

---

Originally Posted by Onepagebook

Few days later though...
why do you think it's me?lol

---

Because the sales coordinator has the same last name as you, and the area code for the phone number is Columbus, Ohio. I was just curious. Nothing more. If it's good RAM, that's all that really matters.

Very nice, great benches :toast:

Quote:

---

Originally Posted by sierra_bound

Because the sales coordinator has the same last name as you, and the area code for the phone number is Columbus, Ohio. I was just curious. Nothing more. If it's good RAM, that's all that really matters.

---

yes! Since it got really really nice reputation in Taiwan, there is no doubt it will be the really good ram here in the US as well.

Thanks Sierra ;)

I think thats the first time I've seen a screenshot of 8GB/s mem bandwidth...

This stuff looks very nice indeed.

Damn, pretty friggin good. That's just about on par with EB, if my memory serves me correctly.

thx for posting those results Onepagebook! :)

and welcome to XtremeSystems :toast:
does it clock any higher with 3-4-4?

Quote:

---

Originally Posted by Kalway

Damn, pretty friggin good. That's just about on par with EB, if my memory serves me correctly.

---

on par with EB? U have no idea what you're talking about...

Quote:

---

Originally Posted by saaya

thx for posting those results Onepagebook! :)

and welcome to XtremeSystems :toast:
does it clock any higher with 3-4-4?

---

Thanks

I think my friend "Oskar Wu(you know who he is)" did DDR700 so did Coolaler ;)
http://www.coolaler.com/ipb/index.php?showtopic=25354

Any idea how much voltage this stuff needs to hit those insane speeds?

Quote:

---

Originally Posted by Onepagebook

BUT for 512mb dual chanel, I have done this for DDR 545, can ADATA DDR600 do that? :D

---

um... if its rated at DDR600 it can do higher than DDR545........


also u know when these will be fore sale in the US?

Yeah I REALLY want to know what vdimm you're running to get 310 2.5-3-3-8. And what's the highest you got it memtest stable, with what voltage and timings?

these tccds are not susceptible to high vdimm... 2.8~2.9v max

Quote:

---

Originally Posted by j@cko

these tccds are not susceptible to high vdimm... 2.8~2.9v max

---

hm? :confused:

you are telling us, that they aren't susceptible to high vdimms.....but in the same sentence u are typing "2.8~2.9v max".....that isn't high vdimm.....high vdimm begins @ ~3.1V+ ;)

so, can we give them a ocz-booster, or did u mean "they ARE susceptible to high vdimm" and u just type "not" falsely? :)

Quote:

---

Originally Posted by p4z1f1st

hm? :confused:

you are telling us, that they aren't susceptible to high vdimms.....but in the same sentence u are typing "2.8~2.9v max".....that isn't high vdimm.....high vdimm begins @ ~3.1V+ ;)

so, can we give them a ocz-booster, or did u mean "they ARE susceptible to high vdimm" and u just type "not" falsely? :)

---

Susceptible heißt neben "anfällig" auch "empfänglich"...in zweitem Fall macht seine Aussage dann auch Sinn... ;)

Gruß, Flox

Quote:

---

Originally Posted by Flox

Susceptible heißt neben "anfällig" auch "empfänglich"...in zweitem Fall macht seine Aussage dann auch Sinn... ;)

Gruß, Flox

---

heißt "susceptible" nicht "empfindlich? :confused:

also, dann wäre es ja ein paradoxon so wie er es erklärt:
"they are not susceptible to high vdimm" aber nach ein paar Punkten steht dann "max 2.8~2.9V max"....und das ist ja wohl kein hoher vdimm....das meine ich....meint er jetzt "anfällig" (was zu den 2.8-2.9V passen würde) oder hat er einfach nur die falschen Werte angegeben, weil für IHN 2.8-2.9V hoch sind? :confused:

btw. sorry for german conversation :D ;)

just use languagetools @ google or altavista :D ;)

Quote:

---

Originally Posted by p4z1f1st

heißt "susceptible" nicht "empfindlich? :confused:

also, dann wäre es ja ein paradoxon so wie er es erklärt:
"they are not susceptible to high vdimm" aber nach ein paar Punkten steht dann "max 2.8~2.9V max"....und das ist ja wohl kein hoher vdimm....das meine ich....meint er jetzt "anfällig" (was zu den 2.8-2.9V passen würde) oder hat er einfach nur die falschen Werte angegeben, weil für IHN 2.8-2.9V hoch sind? :confused:

btw. sorry for german conversation :D ;)

just use languagetools @ google or altavista :D ;)

---

Also ich würde den Satz so interpretieren:

"Sie sind nicht empfänglich für hohe VDimm". Laut Oxford Advanced Learners heißt "susceptible" u.a. auch so viel wie "capable".

Und Google sowie Altavista schießen mit "empfindlilch" als Übersetzung eh den Vogel ab... :D

Gruß, Flox

ok, gegen ein Oxford Advanced Learners kommt mein schulwissen net an :D

aber ja, dass mit google hab ich auch gesehen :D

naja, umso besser.....es soll sich ja lohnen, dass ich die teile mit 3.5V+ laufen lasse :D

@ Onepagebook: so, when we can resellers expect resellers in europe/germany? :D

Its same as Geil ultra X and ocz pc 3200EL rev.2 right ?

he said same ICs.....TCCD

but are they really just selected ICs or do u tweak them (like OCZ do with their EB-series?)

:)

I will contact headquarter in Taipei to make sure that info in Europe.

Quote:

---

Originally Posted by Onepagebook

I will contact headquarter in Taipei to make sure that info in Europe.

---

that would be very nice :)

and what about Ubermann's any my questions about "your" RAM? ;)

are they really just selected ICs of "normal" TCCD-ICs or do u tweak them (like OCZ do with their EB-series?) to achieve that RAM-specs?

when i said they are not susceptible to high vdimm i was referring to Xtreme's standard. Many ppl here seem to obsessed with high vdimm (>3.0 vdimm)

Seems Samsung's TCCDs are getting better and better...
DFI+TCCD seem to be a hell of a combination!!Is this GSkill stuff widely available?

Quote:

---

Originally Posted by p4z1f1st

that would be very nice :)

and what about Ubermann's any my questions about "your" RAM? ;)

are they really just selected ICs of "normal" TCCD-ICs or do u tweak them (like OCZ do with their EB-series?) to achieve that RAM-specs?

---

The rams from gskill are all really nice, that's all I can say. Even the worst pair I have can easily reach DDR600(512mbx2). Currently, we are thinking about to be available at retail market around 10 days later! I will update any information I got!

http://www.e04hardware.com/coolalerbb/fx5x/300.jpg

is it just me, or is the second "5" greyed out in those screens? Are we witnessing a new CPU?...

Quote:

---

Originally Posted by mcnbns

is it just me, or is the second "5" greyed out in those screens? Are we witnessing a new CPU?...

---

I was thinking the same thing... FX-55?

Onepagebook, can you please let us know how much vdimm do those beauties have to reach such high FSB?

Quote:

---

Originally Posted by Sir Lancelot

Onepagebook, can you please let us know how much vdimm do those beauties have to reach such high FSB?

---

Yes Sir;

According to Samsung Tccd IC, the best vdimm is from 2.65~2.85

Since I am using MSI k8N Neo2, the highest Vdimm I can use is 2.85v!
However, I only use 2.8v though.

Best regard,

can you try and use say 3v or 3.1v, so see if they improve their clocks with higher volts?

Quote:

---

Originally Posted by blinky

can you try and use say 3v or 3.1v, so see if they improve their clocks with higher volts?

---

K8n neo2 only support up to 2.85v ;)
I think TCCD won't go with that high Voltage! :)

onepagebook, i sent you a pm and email, please reply.

Quote:

---

Originally Posted by saaya

onepagebook, i sent you a pm and email, please reply.

---

YGPM :D

Sent you a PM as well :toast:

~Bob

Quote:

---

Originally Posted by khellandros66

Sent you a PM as well :toast:

~Bob

---

PM back already! :D

i hope we could buy this in europe :rolleyes:

OnePageBook, please check your PM

lol dont spam him with pms! hahaha :lol:
poor guy :D

Is GSkill only available in asia?!

PM Answered :toast:

~Bob

Quote:

---

Originally Posted by thephenom

Is GSkill only available in asia?!

---

Will be here in US soon

Quote:

---

Originally Posted by Onepagebook

Will be here in US soon

---

And you'll be reseller/wholesaler?

Quote:

---

Originally Posted by thephenom

And you'll be reseller/wholesaler?

---

No, But I am more than happy to answer any questionyou have here at Xtreme!;)

Quote:

---

Originally Posted by Onepagebook

Will be here in US soon

---

i want them in germany, not in the US :D :( :toast:

Quote:

---

Originally Posted by p4z1f1st

i want them in germany, not in the US :D :( :toast:

---

I am really working on it , be very patient dude.. :D

Quote:

---

Originally Posted by p4z1f1st

i want them in germany, not in the US :D :( :toast:

---

no... no... i want it in Canada!


j/k la...

Hey what about in Denmark ? oh well Germany is pretty close so just get 'em there :D

Quote:

---

Originally Posted by Creep-DK

Hey what about in Denmark ? oh well Germany is pretty close so just get 'em there :D

---

YES, exactly that :D

and the US isn't that far away from canada, j@cko ;)

even no one has heard about GSkill here in Hong Kong, which is in Asia........ :(

Quote:

---

Originally Posted by dav

even no one has heard about GSkill here in Hong Kong, which is in Asia........ :(

---

you can directly contact GSkill headquarter in Taiwan, email them, they'll more than happy to serve you! :D

Quote:

---

Originally Posted by Onepagebook

you can directly contact GSkill headquarter in Taiwan, email them, they'll more than happy to serve you! :D

---

yeah i have done that already, thanks 狂少!!!

Are the 4800 DC 1GB kits available yet!?

just send all the memory to me :D

Quote:

---

Originally Posted by PnoT

Are the 4800 DC 1GB kits available yet!?

---

they guarantee pc4400 2.5-3-3-7 dual channel 1gb at the moment.

So when can I buy a 1GB set here in the US ? :D

good question i sent onepagebook and PM and am waiting for a reply!

Please let us know here longshot.

I really want a 1GB 4800 kit like yesterday! :D


Not to sidetrack the thread but Outpost has sticks of bh5 for $44 ea 256mb.

Quote:

---

Originally Posted by PnoT

I really want a 1GB 4800 kit like yesterday! :D


Not to sidetrack the thread but Outpost has sticks of bh5 for $44 ea 256mb.

---

link ?

found them LOL

http://shop3.outpost.com/product/3325952

I can only see the last picture in your first post :s. can you update your hosted pictures please?, thanks :)

Quote:

---

Originally Posted by thephenom

And you'll be reseller/wholesaler?

---

http://store.yahoo.com/digi4me/gskddrexseeo.html

-no sign of european places yet :mad: :down:

Quote:

---

Originally Posted by JWB

-no sign of european places yet :mad: :down:

---

Onepagebook has a link in his sig for European customers.

Always says there is not enough bandwidth for his site and I get an error page if I do not go directly to his sites home page.

Here is a place that has it.

http://shop.store.yahoo.com/digi4me/gs1gbkit5x2d1.html

--Josh

Quote:

---

Originally Posted by Z YA LTR

Here is a place that has it.

http://shop.store.yahoo.com/digi4me/gs1gbkit5x2d1.html

--Josh

---

Nice shop: offers DDR550/2.5-4-4-8 DDR400/2.5-3-3-6 sticks in the headline and then writes DDR400/2.0-2-2-5 in the following text. So what?

Greetz, Flox

Quote:

---

Originally Posted by Flox

Nice shop: offers DDR550/2.5-4-4-8 DDR400/2.5-3-3-6 sticks in the headline and then writes DDR400/2.0-2-2-5 in the following text. So what?

---

GSkill rates their memory for 2 different speeds simultaneously:

DDR400 2-2-2-6 and DDR550 2.5-4-4-8 or 2.5-3-3-7 depending on the model simply because TCCD's are able to reproduce that behaviour.

Quote:

---

Originally Posted by mrlobber

GSkill rates their memory for 2 different speeds simultaneously:

DDR400 2-2-2-6 and DDR550 2.5-4-4-8 or 2.5-3-3-7 depending on the model simply because TCCD's are able to reproduce that behaviour.

---

Gskill offers DDR550/2.5-4-4-8 DDR400/2-3-3-6 sticks, too.

Greetz, Flox