..anyone figured out how to get it to work yet??
I`ve seen my chip run over 3GHz, but without the PCI\APG lock..
Is there a BIOS or anything that will do what we want??
Printable View
..anyone figured out how to get it to work yet??
I`ve seen my chip run over 3GHz, but without the PCI\APG lock..
Is there a BIOS or anything that will do what we want??
www.bleedinedge.com
bios 1005.021
Sweet!!!
Thanks a ton man!! I`ve never been able to run this good 1:1.
Who says tight timing are what`s needed for bandwidth??
Check it out...with a 1gig kit OCZ PC3500EBs
Wow, insane bandwidth!!
A8V 2.0 OR 1.02?
bewteen the 4 and 5th slots it says A8V rev 1.02Quote:
Originally posted by AcUaViVa
A8V 2.0 OR 1.02?
Wow... and you are sure the locks are working now with tht bios?
How would I tell??
I crap out at about 249-250fsb 1:1, but I was thinking it was the memory seeing as how it`s only PC3500.
they are working
you wouldn't get that far w/out locks
rukee you oc by bios or by clockgent?
this week i have a 3500+ and a a8v 1.02 like you
but my memory its adata 4000
you think tat i can hit 250 1:1 ?
2.5-4-3-10 1T
thanks
I boot at 220fsb, then use the setfsb to bump it up from there.
whats the difference between 1005.020 and 1005.021?
im testing the 1005.020 now, locks works amd seems rock stable at 2600Mhz still on air
never used 1005.020, just used the 21 variant. Heard the 21 was better, but I have no basis for comparison.
My locks work. Too bad my memory won't scale as high as Rukee's.
After testing both I have to say the 1005.020 is much more stable, and faster the 1005.021.Quote:
Originally posted by JNav89GT
never used 1005.020, just used the 21 variant. Heard the 21 was better, but I have no basis for comparison.
My locks work. Too bad my memory won't scale as high as Rukee's.
.... At least on my A8V v1.02 :D
hrm
I'll have to give it a go :)
This is just getting crazzy!!!
Can this be PC3500???
I can`t believe it!!
http://www.justwebit.com/sites1/42124/260fsb.jpg
1005.020 cant oc from bios to 250 fsb?
I can on mine :DQuote:
Originally posted by AcUaViVa
1005.020 cant oc from bios to 250 fsb?
Awesome results Rukee :toast:
u running those EBs with 2,8 vdimm ??
I duuno what they are at, I have the voltage set to 'auto'Quote:
Originally posted by Blaster
I can on mine :D
Awesome results Rukee :toast:
u running those EBs with 2,8 vdimm ??
updated screenshot....I can`t believe it myself!!:slobber:
damn can you hit 8k in sandra
what`s the highest anyone has seen??
...is this it??
Outstanding Rukee :D
Can you run some Super Pi for Us?:toast:
I wish I could run SuperPi there! :p
It`ll run Sanda at 262 and 01 at 259.
Strange is it scores the same in SuperPi @ 235 (32secs) as it does at 248fsb (32secs). What would the bottle neck be there??
superpi's scores have a pretty large spread from point to point as far as mhz and fsb go.
well rukee
i have the same bios but...
you can change de multiplicator of your cpu?
your oc is made with set fsb ?
you cant put up the vcore by bios?
Quote:
Originally posted by Rukee
what`s the highest anyone has seen??
...is this it??
Don't know what the highest is, probably higher than this, which is the best one I've had.
details man!! What platform and memory is that?? any MODs done?
Awesome results dude!! :D
Its a gigabyte-939 board at 11 x 274 with a FX-53. Vcore and vdimm modded. KHX pc3500(bh-5)