just broke 22k on my mobile 2600+

Printable View

05-01-2004, 01:45 PM
Der_KHAN

1 Attachment(s)

just broke 22k on my mobile 2600+

pity i cant publish my score of 22180 at 2734mhz,248x11,cpc off. thats why i dicided to go with cpc on again. so now i am at almost the same scores at 220x12.
guess those 28mhz fsb are just the price you have to pay for a gig of doublesided ram. :(

but anyway, nice score, isnt it?
05-01-2004, 01:46 PM
Der_KHAN

1 Attachment(s)

and check out my rig, especially my tiny wc setup - xtremely nonxtreme! :D
05-01-2004, 02:11 PM
Boyne7

nice
05-01-2004, 02:21 PM
Henry

Nice score, with 250+ fsb tight timing maybee you can get 22.5K+ :)

HERE'S my Desktop Barton 2500+ and Softmodded 9800SE score.
05-01-2004, 03:00 PM
S&M

Der_KHAN !

nice job !

i have the same stepping - waiting to test it this week also - thnx for the oc results - now i have something to wait for ...
05-01-2004, 03:33 PM
Der_KHAN

same stepping? looking forward to see where u can get. :)
05-01-2004, 03:41 PM
LilGator

what temps do you have (220x12) @ 2.00v ? And how did you get your CH-5 to run 2-2-2 ? I guess I have the bad CH-5, it hates anything other than 2-3-3 ... 2-3-2 is barely usable ...

nice chip there, where did you get it from ?
05-01-2004, 04:02 PM
Der_KHAN

socket temp is around 45-48C
do u have 512mb or 256mb dimms?
05-01-2004, 04:09 PM
ricjax99

Welcome to the 22K club :toast:

http://www.xtremesystems.org/forums/...609#post433609
05-01-2004, 05:14 PM
Der_KHAN

Quote:

Originally posted by ricjax99
Welcome to the 22K club :toast:

http://www.xtremesystems.org/forums/...609#post433609

ooooooh, yyyeeeaaahhhh! :banana4:
05-01-2004, 05:33 PM
LilGator

Quote:

Originally posted by LilGator
nice chip there, where did you get it from ?

:) I have 2x256 Kingston HyperX PC3500, CH-5
05-01-2004, 06:32 PM
Der_KHAN

Quote:

Originally posted by LilGator
:) I have 2x256 Kingston HyperX PC3500, CH-5

sounds good.
what is really important for my latency settings is that the last two are 13 and 15, everything else doesnt really work.

i heard that ch-5 doesnt really like more than 3.1vdimm.
but Ã:banana: cant confirm that one. mine runs best at 3.3.
recently i had it running in another board at 3.4v and it looked like 260/cpc off was possible.
05-01-2004, 07:35 PM
LilGator

hmmm, i'm running an NF7-S 2.0 ... only have 4 mem timing options...
05-02-2004, 04:55 AM
Der_KHAN

maybe there is a bios for your board with more options!?
05-02-2004, 08:12 AM
faruquehabib

man, 22+ k w/ a 9700pro and average water-cooling...most impressive, bro! :toast:
05-02-2004, 08:43 AM
zz64

nice results!! BTW, how did you get those mount those fans to cool ur mosfets and rams? can't really make it out of the picture
05-02-2004, 09:12 AM
IvanAndreevich

Nice clocks on that R9700. What are the voltages to reach that?
05-02-2004, 10:12 AM
Der_KHAN

lol, thats my most professional 'adhesive tape mounting technology'(TM). the ram cooler isnt mounted at all, its just hanging in between of all those cables and tubes. :D

and btw thats a 9800pro, its just shown as a 9700 cause i use 3.1cat
05-02-2004, 10:15 AM
DazzXP

Why such old drivers for?
05-02-2004, 02:06 PM
Der_KHAN

1 Attachment(s)

Re: just broke 22k on my mobile 2600+

just broke 22.5 !!!! :bounces:

i just kept pushing, that must really have hurt my vc! :hehe:

http://service.futuremark.com/compare?2k1=7801850
05-02-2004, 04:28 PM
LilGator

Nice work ! Still on WinXP ? And your FSB is only at 224, wow ...
05-02-2004, 04:59 PM
Boyne7

whats the advantage to using such old cats?
05-02-2004, 05:05 PM
boshi

I'm using the omega 4.2s, are the old cats better?
05-02-2004, 07:36 PM
uwackme

hmmm

Old cats are good for bench's.... but use newer 4.3 4.4 for actual gaming.

You need the Gigacube EDIE bios for that 9800pro. Im getting 410Mhz out of the samsung rams with OCZ heatsinks and 3.1Vdimm on the Vmod.

Yes CH5 likes VOLTAGE too... Im at 3.3V, will do 240 11,2,2,2 for all 2D use, 11,2,3,2 for mild 3D use... like 3dMarks....but needs 11,3,3,2.5 for hours of stable Farcry.

Also does 250Mhz 11,2,3,2 for 2D.... cant get 3D stable this high.

The limitation IS NOT the CH5 or 2600+mobile, it is the NForce2 AGP interface, and the fact the same timings are used for CPU access and AGP access to memory...BUT... the AGP bus cant handle the fast timings that the CPU access can, so we end up with the need to lower bios settings to meet the AGP's requirements.
05-03-2004, 01:09 AM
SAE

Congrats again, my friend :thumbsup: :D

Yeah. If we 've had more time to test those 260 ( ;) ), maybe we would have gotten 23k on my rig with your cpu/gig of ram :hehe:

Prom still not here... f**k those public holidays on saturdays :rolleyes: DHL is really lame.... :(
05-03-2004, 02:13 AM
Der_KHAN

ah crap, theres nothing in the world (well almost) that sucks more than waiting for a late hardware shipment!
05-03-2004, 02:20 AM
SAE

Quote:

Originally posted by Der_KHAN
ah crap, theres nothing in the world (well almost) that sucks more than waiting for a late hardware shipment!

Yeah. Wise answer ;)

Erm... I can bench at 237x11 with my locked barty cooled by hot soup :D

Currently trying to manage a 235x11 3dmark looping :rolleyes:

P.S. Stephan, my Infinity is again working fine :thumbsup: Seems it was the cpu...