21800: FX5700U GDDR-3 powah:) 615/1205 no mods

Well, i got a bit stuck at 25.7k (http://service.futuremark.com/compare?2k1=7772081) with my Sparkle 5900XT (630/955 watercooled with 1.9V Vgpu), maybe i'll give 44.03 a try (that was done with 53.03).
So I give a try for Albatron FX 5700U with GDDR-3 memory. First run at 590/1180 aircooled gave me 21322, that's 50 points better that previous record held by MickeyMouse. Then I rip out that poor cooler (card was quite hot!) and mounted my EXOS and some spare memory heatsinks from ASUS V9950GE. Clocks boosted to 610/1205 and total result to 21800 (http://service.futuremark.com/compare?2k1=7785826).

So, one more small record for the team!

:toast: :banana:

Gonna voltmod that beast and see if it will handle 700 on gpu...

Budget NV cards is much more funny to play with, as for me. Though, cash in hand for 6800U and i'm gonna return to orb top-10 :)

thats a crazy good score and I applaud you for using "legit" drivers too. did you lodbias this too? that gddr3 ram is sweet stuff. 1.2GHz? wow! that would easily give you the record since others are like 200MHz behind you in the ram. bet you can get 22.5k with vmods ;)

awesome work dude!:eek: :slobber: :slobber:
Give this bastard some serious volts!:slapass:

9600X-what? :D

:toast:

Good luck with the volt mod, walldow of overclockers has 730/1180 and is awaiting his AMD64 ....

Regards

Andy

Nice!

damn fine job man! 1.2ghz ram = sweeeet! very nicely done.

Regards,

James.

Quote:

---

Originally posted by zakelwe
:toast:

Good luck with the volt mod, walldow of overclockers has 730/1180 and is awaiting his AMD64 ....

Regards

Andy

---

he may break 24k seeing his core clocks are more than 100MHz above him!

:eek:
Beats my raddy... back to benchin', Dark!:D

Ti4200
Vgpu modded = 700/1205 on watercooling, so we'll see :)

BTW congrats Mickey, he is @ 22.4k now with his FX-51 system. So that's will be nice race;) Good luck for us both...

It's benching time. Gentlemen, start your engines! :)

Nice! How much volts on gpu? It's benching time with NV40 :D

X800 XT is even more possible for me:)

Still 1.7V... Gonna try higher.

http://service.futuremark.com/compare?2k1=7796087
:slobber:

Jason / MM has just popped up a 24k score for the 5700U

:toast:

Good job he's not using the 44.03 drivers as that would have been 25k.

Amazing result for a mid range card.

Regards

Andy

Quote:

---

X800 XT is even more possible for me

---

Why? Have you got a sample?

Quote:

---

Still 1.7V... Gonna try higher.

---

1.9V will be OK! If u'll try it with direct die.......

thats some sick high scores on a sick high overclocked fx cpu! what could he score with a 400/800 ti4200? 24k as well?

Quote:

---

Originally posted by Geforce4ti4200
thats some sick high scores on a sick high overclocked fx cpu! what could he score with a 400/800 ti4200? 24k as well?

---

22k....

Holy $h1t balls. Looks like my 3rd place 5700 Ultra score just flew out the window. Nice work on everyones part.

very nice scores! hows the 2003 and aquamark3 scores on that? i'm thinking about getting the Albatron with the ddr 3. ram should run alot cooler! i know the ddr2 was extreme heat!


anyways my 5700 ultra seems to top out at 800mhz core no matter what kind of cooling nore the voltage you put threw it. i hit 800mhz with 1.78 volts, and up to 1.95 volts seems to be ok, but with no aditional gains on clock speeds! (ran it all the way to 2.0 volts, but 2.0 volts is hard on the AGP slot). however you will have to do the overvoltage protection mod, for any thing over 1.54v (2d mode) and 1.72 v(3d mode) seems to triger it!if you dont know about the overvoltage protection you can find details on the mod in my guide!http://www.ocforums.com/showthread.p...hreadid=289593

http://www.theforumisdown.com/upload...0resistors.jpg


and i run my card at 700/1050 (thats what i keep the card at)every day and night for the last three months At 1.70v not a nitch, play finaly fantasy 11 online unreal 2003 and many other games with the 700/1050! runs just like the day i baught it! nvidia realy has these cards underclocked for the core runs extremly cool!

couple more weeks and ill have my A64 system up and running!:stick:

800MHz core? thats 100MHz higher than what jason got, hed be at 26k with your clocks holy lord!

Wow, i was sure that Jason would beat that 24k on his rig. Well, maybe today at night we'll try at least 23k (22100 was done @ unmodded stuff, but i see no reason to publish it).
Good news for me is that his card is @ 702/1175 with phase-change cooling, while mine does 700/1205 with simple water...

Sphinx
Well, let me say i just know something...

Walldow
Yes good sir, you have my gratitude for the guide. Excellent job! I modded mine using your instructions (only Vgpu yet though). By the way, looks like GDDR-3 version use same Vmem regulator, but voltage is near 2.05V. Gonna try Vmem today, cos 1205 will be not enough to reach MM...
Very impressive card clocks, i wish you luck with ur A64 system - it will be nice to see one more competitor in our challenge.

As for GDDR-3 - it is much cooler than DDR-2, but anyway chips need heatsinks and good airflow to work at proper clocks.

Quote:

---

Originally posted by ALT-F13
Wow, i was sure that Jason would beat that 24k on his rig. Well, maybe today at night we'll try at least 23k (22100 was done @ unmodded stuff, but i see no reason to publish it).
Good news for me is that his card is @ 702/1175 with phase-change cooling, while mine does 700/1205 with simple water...

Sphinx
Well, let me say i just know something...

Walldow
Yes good sir, you have my gratitude for the guide. Excellent job! I modded mine using your instructions (only Vgpu yet though). By the way, looks like GDDR-3 version use same Vmem regulator, but voltage is near 2.05V. Gonna try Vmem today, cos 1205 will be not enough to reach MM...
Very impressive card clocks, i wish you luck with ur A64 system - it will be nice to see one more competitor in our challenge.

As for GDDR-3 - it is much cooler than DDR-2, but anyway chips need heatsinks and good airflow to work at proper clocks.

---

hehe i dont know how many times i got to tell you guys, that supper cooling the core dosen't help a bit on the fx 5700! i run the 800mhz on strate water cooling! and i have run ice water through the system when benching for my 2800+(IT RUNS SUPPER HOT AT @2600MHZ) and no higher clock speeds are obtainable!

as for me doing 3dmark 2001 you probly wont see me mutch there!i dont like it! to system and FSB orianted for me, dosen't give a good card for card comparison. it more of a sytem to system comparison. they should have called it system mark!:D now 2003 and aqamak3 are a differant story just cause you have a faster pc dosn't mean you'll have the higher score! wich if you are comparing one card to another card, is the way it should be!;) im still waiting for someone to beat my 3dmark 2003 score of 5833 and my aquamark sore of 47000!:banana:

any way be carfull on taking the voltage too high on that DDR3 because i know it runns on less voltage. so i'd say it probly can't handle as mutch voltage iether!i'd be scared to take it much over 2.5 if that. atleast till some one else fries theres first!:D

Quote:

---

Originally posted by walldow
as for me doing 3dmark 2001 you probly wont see me mutch there!i dont like it! to system and FSB orianted for me, dosen't give a good card for card comparison. it more of a sytem to system comparison. they should have called it system mark!:D now 2003 and aqamak3 are a differant story just cause you have a faster pc dosn't mean you'll have the higher score! wich if you are comparing one card to another card, is the way it should be!;) im still waiting for someone to beat my 3dmark 2003 score of 5833 and my aquamark sore of 47000!:banana:

---

3DMark01 is extremely video card limited below about 10k, and even more so around 5k, where if you have a really fast rig, even small clocks on the card give large gains, and it acts more like 3DMark03 does for us now...

As for AM3 that's just your FPS x 1000 so 1 extra frame is 1000 points.

Well, as I predicted... 23291 at 720/1205... http://service.futuremark.com/compare?2k1=7799711

man thats crasy.. 23k from a 5700 card :slobber: :slobber: :slobber: impressive job there alt_f13:thumbsup:

Quote:

---

Originally posted by ALT-F13
Well, as I predicted... 23291 at 720/1205... http://service.futuremark.com/compare?2k1=7799711

---

nice! have you done the memory mod yet? if so what voltages have you taken it too?


you should be able to set the 2d voltage to around 1.54volts . the DAC referance voltage for the overcurrent protection is 1.55volts (so anything under that shouldn't trip the overprotection). this puts you at 1.69-1.70 volts in 3dmode, witch should put you in the 740-760mhz range on the core!

According to Jason he has the #1 score for 3DMark01 and 3DMark03 because you guys cheated. He is claiming this over at Futuremark forums.

Quote:

---

Originally posted by SPQQKY
According to Jason he has the #1 score for 3DMark01 and 3DMark03 because you guys cheated. He is claiming this over at Futuremark forums.

---

LOL

Nice score ALT 13 :toast:

What's Jason been smoking now he still has top score ??? ... let me go and have a look ..

can't find it .. never mind


Regards

Andy

SPQQKY
Hmmm... Well he really holds the #1 for 5700U. But i don't see any mentions of cheating in his thread at FM forums...

ALT-F13 I belive russian overclockers will be the best overclockers in the world ;)
Nice result, are you going to use direct die on it, or air cooling will be enough ?

Quote:

---

Originally posted by root
ALT-F13 I belive russian overclockers will be the best overclockers in the world ;)

---

Ahh I think some pretty good ones come from all over ;)

Especially Finland, Denmark...

he didnt use the cheating 44.03 drivers. I dont know why Jasons selling his fx5700u. unless he can buy another one as fast or faster, he wont be #1 for long

Quote:

---

Originally posted by Soulburner
Ahh I think some pretty good ones come from all over ;)

Especially Finland, Denmark...

---

Well thank you ;)

and for ALT-F13...you really seem to know how to get these nVidia cards to kick some serious butt! :)

I asked him how he could claim his 4866 3DMark03 score could possibly be #1 and he said it was because the rest of us cheated. We didn't use official FM approved drivers. I don't know about you, but I don't need FM telling me what drivers I should use. It seems as of lately, any driver that nVidia releases that does well in benches, FM dismisses them. All drivers do better at certain games and will do better at certain benchmarks as well. Time t odeal with it FM.

Quote:

---

Originally posted by SPQQKY
I asked him how he could claim his 4866 3DMark03 score could possibly be #1 and he said it was because the rest of us cheated. We didn't use official FM approved drivers. I don't know about you, but I don't need FM telling me what drivers I should use. It seems as of lately, any driver that nVidia releases that does well in benches, FM dismisses them. All drivers do better at certain games and will do better at certain benchmarks as well. Time t odeal with it FM.

---

not only that, the 4600 that he beat on the fm approved drivers, is mine! its was take three months ago when i was going up against Zakelwe my card clocks were only 730/1050mhz! i just havn't run those drivers at 800/1200 yet!(i'm waiting on my nforce3 250 and mobile- athlon 64 3200+, i plan on clearing the baords, including his 25000 in 2001!) i think he ran the newer drivers and couldn't beet my score of 5800 in 2003! because looking at his Aquamark3 scores i'm still smokeing him! he is only hitting 45900. with a gfx score of like 5000. my aquamark3 score is 47300, with a gfx score of 6600! even with a fx 51 he still cant beet me, excepting cpu and fsb related (2001) were he clearly has a fx 51 and i have a little old barton!any way he might be playing around, but i know mickey, he is :banana::banana::banana::banana:y. and if he could have beat my 5800 he would have done it with vengance!he defently has the system but his card still isnt up to what he thinks! give me a couple weeks im trying to get the rest of my sytem up as fast as possable!only thing i'm waiting on is a good nforce3 250! whant to way my options before just grabing any old board!epox and chaintech are the only 2 i have been able to find reviews on so fare, and the chaintech is the only one in production so fare!

Mickeymouse = FULLOFSH@T
Walldow = #1 5700U ( overclockers 3dmark team )

This has been a public service announcement by Andy

Regards

Andy